Reviewing the Moose 3D Scanner by 3D Makerpro

No video

Reviewing the Moose 3D Scanner by 3D Makerpro

Рет қаралды 2,765

Күн бұрын

Reviewing the Moose 3D scanner from 3D Makerpro.
If you've got a Moose scanner let me know what you think of it in the comments.
Get the Moose 3D Scanner here with 10% off: shareasale.com...
Currently you can increase the discount to 15% off with code: ARTOV15
Download JMStudio free here: forum.jimumeta...
3D scanner reviews: • 3D Scanner
Support the channel on Patreon: / artisansofvaul
#3dscanning #3dmakerpro #moose #makermadness

Пікірлер: 18

@Rob_van_der_Linden Ай бұрын

Totally unrelated, but forever thought you were saying "greetings Hobbits", but in the preview it shows subtitles and just now noticed you're saying "greetings Hobbyists" :-)

@ArtisansofVaul Ай бұрын

😂😂😂 Maybe I should try saying different things and see if people notice 😅 Glad the automatic subtitles caught what I was saying though 👌🏼

@ShaepicVR Ай бұрын

I probably would never have considered getting a dedicated scanner before seeing these results! Holy wow that thing is useable!

@ArtisansofVaul Ай бұрын

Glad you liked it 😁👌🏼

@vcancer Ай бұрын

In table mode, you can unselect the half of the rock that has been highlighted for deletion by using the ALT + selection tool. Then once the table plate is deleted you can go back and select any other artifacts that are still visible.

@ArtisansofVaul Ай бұрын

That's a good tip but you can also select in the same way in the other mode so I'm still not sure what the table mode is accomplishing....

@ironxYT Ай бұрын

ive had my eyes on these for a while, i am very very stoked you made this video. thank you.

@ArtisansofVaul Ай бұрын

Glad I could help out 😁

@bluyben Ай бұрын

I just received my moose, this is my first scanner. I am looking to find what is essentially a dummies guide. Id also be interested in a follow along guide, I do have a printer and can make a test item if one is recommended.

@ArtisansofVaul Ай бұрын

@bluyben hmm... I don't know of a start guide but there must be some good ones out there. My main tips would be to go nowhere near the table mode, it doesn't really work and will just cause confusion. The other is make sure it is plugged into an electrical socket. The USB might Male you think you can use your computers power instead of the mains, but it doesn't work.

@MattsTechs Ай бұрын

So, what scanner would you recommend me? It will be used for scanning more complex objects where comes scanner handy instead of mesuring it by yourself. Models from scanner will be used for 3D printing (size 5cm-50cm), probably not directly, but you know :D Budget is around these scanners that you have shown. Thank you

@ArtisansofVaul Ай бұрын

The budget is the tricky bit. At the smaller size you want a blue light scanner. The tricky thing is that at your larger scale (50cm) you need something that can scan a larger surface as well. Basically you're going to have to compromise either the scan quality at the small size, the time taken/easy at the larger size or your budget will need to be higher to do both well. If you want the small size get the MINI2, I haven't found a better detail scanner than that so far. Medium size would be this or the Pop3 at a mid budget or the Inspire if you want cheaper I would say. All of them are reviewed on this playlist which I hope helps: kzfaq.info/sun/PLnqmLZKRm5CZLZSpCbyXO1YceOsdjiDn1&si=fmdcCzpr_LQDceg3