The reason why I asked if “glitch” was a character is because the grammar on the actual hack made it appear as though it was a name. It said “how to draw glitch” not how to draw “a glitch” so I wasn’t sure if it was a character from a show that had glitches and they referred to as “glitch” hopefully that clears it up! I know what a glitch is 😅

For the bead string pulling, they probably used pouring acrylic, its acrylic paint mixed with a pouring medium so you can do acrylic pours, making the paint runnier. The same as the base black coat. Your first one looks really pretty though, the second one too, but I prefer the colours of the first. Also resin doesn't usually like having things in it that have moister inside in, leaves would be better dried, you can get some weird reactions with moisture in resin.

The Mickey Mouse glitch was so cool... guess you could say it went... indi-go-crazy 😎😎😎

The watermelon "hack" is basically just a version of a style of painting called one stroke painting. You should do a video where you attempt a one stroke painting using acrylic. It's a really fun technique to use and is great for painting flowers or anything where you need a good blend or a gradient. (It works really well for sunsets too.)

Please be careful when working with resin Guys, in a well ventilated room and use gloves because it can cause irritation on the skin, the fumes arent the greatest to inhale either so preferably wear a mask, stay save everyone ❤️

"Why is she using pen on the t-shirt...maybe it's water-soluble or something, she must know what she's doing." *3min later* "I stupidly used a pen to draw out the Mickey...why would I do that?" Oh, Chloe... rip

I am not a professional but...some things that you should keep in mind while using resin are:- 1) always mix hardener and resin thoroughly .... even though u think it's mixed complete 2) always avoid cavities on the surface you are pouring the resin on if possible...(like you covered the whole leave with glue and prevented the leaves' edges from poking out from the wood surface as it might have created cavity for air bubble ) 3) always ready the instructions of the resin bottle 4)some resin are exothermic and radiate a lot of heat in the surroundings if poured in a lot of quantity 5) once poured vibrant the surface gently avoiding any spills to help the air bubble to come upward on the surface and then using lighter or a small blow torch to pop the bubbles on the surface to get a good transparent finish. 6) always always cover hands with latex gloves to prevent skin contact.

To get resin off your fingers, get some Fast Orange, or Gojo. Its mechanic's soap, smells like oranges, and it contains bits of pumice that help get oil, tree sap, and in our case resin off your hands =3

The "Blobby Flame" actually looked cool. Sort of like a fiery flower or something. Awesome job, Chloe.👍

Me watching Chloe use resin: *screams for her safety and the safety of that desk*

When you were plugging your podcast I was thinking "I hope she interviews Evan and Katelyn!" And then when the last hack was resin and you asked "How do I get it off my fingers?" I was like, SHE HAS TO INTERVIEW EVAN AND KATELYN!! :D If you don't know them, they're makers/KZfaqrs who are known for working in resin a lot. I think it would be really funny to talk to them on your podcast and you could share your experience with them!!

I think when you called that shade of green nasty, little Baby Yoda on your shirt shed a little tear...

Lots of people have already given great tips about resin but here's some more: Water doesn't mix well with resin, which is probably why the original hack used fake leaves. Basically it can "overactivate" the resin, cause an accelerated chemical reaction, and overheat and cause a lot of bubbling. The "weight" of the resin doesn't matter, if the leaves weren't glued down they float. A lot of people who work with resin will often do things in multiple pours, or use other strategies to secure an object to a spot. Also lots of people use a heat gun or vacuum chamber to get rid of bubbles. Wear gloves and work in a well ventilated area when working with resin!!! Resins can be very volatile and bad to breathe or get on your skin! There are MANY types of resin for different purposes, I'm no expert on this, but Peter Brown's YT channel "Shop Time" has used many types of resins due to differences in clarity, work time, resilience, etc.

The Mickey Face Hack: You failed to catch one detail: the face and ears of the mickey shape was placed carefully on one end of the "snake" and painted separately from the rest. It's clearly visible at 2:25 of your video. Three little blue, separated part on the end. And I'm not an expert, I just payed attention to the original video.

The chain one is usually used with the paint they use for acrylic pouring, both the black and the colorful paint ^-^. Edit: although they don't say that, so don't feel bad or anything. I just wanted to let you know in case you wanted to try it again.

That last one isn't a "hack" it's just an art project 🤷🏽 also the string pull one I wouldn't consider a hack, it's just a different technique for pouring acrylics. Lovely video though

wait, have you never heard of Rick and Morty?

I'm writing this down so I can find it easier later: Sketch it Black fineliner Red slightly left Blue slightly right I noticed they added white lines w/ probably a gel pen as well.

No one: Literally No one: Me: just notices Chloe is left handed Yes I’m dumb

Me, a DIYer/crafter, this entire video: "Oh, Chloe, nooo!"

Chloe a glitch is like when your screen sort of shakes/goes weird

No one: Chloe: laughing at herself saying *backside* I love Chloe 😂

These episodes could be called “What the Cra...” it leaves it open to be craft or crap xD That being said, love these videos ❤️ Or “What The Craft” lol

Chloe in every video : I am gonna mess this up End of the video : creates a master piece

“is glitch a character” glitch like when a screen glitches

It's not the feeling of glue it's the peeling of it after it dries

Cloe, a good tip to removing resin is 100% pure acetone. It comes off easy! Also the hacks are so good!

Nail polish remover gets out resin, or just acetone to break the bonds Resin is tricky but fun! I was worried yours was going to leak out the back of that tray, it would have been good to seal the whole bottom with modge podge then paint w/e an let that all dry before adding it. You should use a blowdryer/ lighter to pop any air bubbles on the top so you have a nice smooth surface. With my resin projects I have these huge plastic tubs to store my projects while they cure, keeps any pet hair out and contain that chemical smell. You could honestly buy another bottle of resin and do a layer on top of what you did to smooth out imperfections, its kinda rad in that way. Loved the vid!

Lol when you were doing that resin craft I could actually see and hear NerdECrafter judging you in her own adorable, salty way. 😄

"I'm too old" honey I'm 27 :') a glitch is like, a fault in visuals

Me: "That looks go--" Chloe: "That looks really bad" Me: "That looks bad"

Chloe: Their leaves in the resin are fake, but mine are real. I hope the resin preserves them. Me who has made the same mistake: NO CHLOE! NOOOOOOOO!

You look like you feel much more put together in your "new" space! Tie dye tips: soak in warm water(with soda ash preferably) first, it makes tying everything easier. You can honestly tie just the Mikey part back up and put dye on just that spot. You could also just kind of draw it on with your dye.

*Me who works with resin as a living* oh Chloe no Pro tip, dry your leaves in silca gel first (works great with flowers too!) Also my fav resin is Unicorn Art resin (hope this helps someone)

Omg, I cant wait for spill the paint water pod cast! I love moriah Elizabeth, nerdy crafter, jazz, and superreadizzle!!!! Yay!!

thank you for inspiring me to do more art/paintings I would have never started doing art if I had not watched you! thank you

Me: mom can I dye my handkerchief.. Mom: Nope. That's wastage. Chloe: dyes a hollister t shirt for nothing

things ive learnd from chloe: .you dont need expensive art supplys to make art .its great to be messy (in art)

I love the new setup! :)

for the failed mickey tie dye, you can just make another mickey face with a sharpie or something on the tshirt, and i think itll turn out pretty cool

Okay, because I work with resin too, let me help you out here. While your resin is still wet, you can wipe it away with isopropyl alcohol to clean it. Soap and water will not work, that'll just get stickier.. Otherwise, you have to wait until it's cured after 24 to 48 hours (depending on your resin's instructions), then maybe you can peel it up, but I dunno how well that's gonna work for your desk. I work over a silicone mat for that reason, makes cleanup way easier if I spill (which I do, I'm very clumsy). However, the way you filmed this has me a bit concerned because it wasn't clear whether or not you mixed the hardener and resin (parts a and b) together before you poured it on the piece. It looked like you were putting each chemical separately one at a time, and I'm not sure if that would actually cure. The idea is that you mix the two parts together for two minutes (or more depending on your directions) then pour it into your piece evenly and slowly within the 40 minute work time. You can employ a lot of techniques to make it smoother, like letting the bottles (while closed) rest in a hot water bath, or double mixing, which is pouring it from one cup into another to ensure it thoroughy mixes (my EasyCast resin actually requires that you do this, so I'm in the habit of doing it with all of them). Also, using a lighter overtop while it's still wet can help reduce bubbles in the final piece. For more information, I'd advise looking into some of NerdECrafter's older content, she's the main channel I learned from. I also learned a lot from BunnieDIY, Ayeshashasha!, and Rybonator, who all work with both UV and 2 part epoxy resin. Otherwise, this was a really entertaining video. Some of these hacks looked fun, and I'm tempted to give some of them a try in the future. ^^ I wonder if it would work to use a string of beads instead of a pull chain for that one painting technique, that could be interesting.

If you work with resin be sure to have a ventilated space, be outdoor or wear a respirator! This is really important because the fumes are bad for you. Safety first. Also use gloves cuz it can irritate your skin.

Yeah from my experience you’re basically stuck with that resin until it eventually wears down in 6000 years. 😂 paint thinner or Dawn dish soap helps but there’s still a thin layer that never seems to leave.

Of all your background changes I really enjoy this one the most!

I don’t know why but I kinda want to see chloe try and paint using house paint. Like how well can wall paint mix with others etc 🤔

For the watermelon 'hack', you should draw the seeds afterwards.

To get resin off your hands rub salt, baking soda, or use a dry spray deodorant. The last on really does work I tested it.

Who else loooves when Chloe makes these testing Instagram art hack videos?

CHLOE I AM LITERALLY OBSESSED WITH YOUR T-SHIRT !!!

Aa even and Kaitlyn say, double glove! You don't want resin on your hands

The calmness of her turning and saying "oh my light just fallen over" had me so weak

15:28 “I’m going to paint the backside...*giggles*”

Okay, but was it just me that was looking at Chloes amazing baby Yoda t-shirt the whole time

your baby yoda t shirt is just adorable loving it.......

Her shirt is soooo adorable!!!😍😍

Hey Chloe! Idk if you're every going to see this but I just want to THANK YOU for being such a big inspo, you inspired me to start my own channel and now I'm almost at 850 subs! You are amazing and I honestly can't imagine a world without u

Please tell me you wore gloves & a respirator when using the resin?? 🙈

The podcast is something I would actually like to listen to! Everyone you mentioned are all the artists on KZfaq I LOVE!

I love how she says stupid, it sounds so satisfying.

Is it just me or are all the art KZfaqrs suddenly gotten better backgrounds and video quality

I always comment but I can't be bothered to comment but I'm commenting anyway about how I feel about commenting today 🥴

I’m new to the channel, but every video of yours I’ve seen so far you’ve had a baby yoda shirt on. I approve 👏👏👏

Your second bead painting looks like a tropical flower!👌 digging it

Never been this early hey..?

It looks like lemon leaf. We used to use it as a filler when I worked at a florist shop.

OK, Chloe, new rule: whenever you work with unfamiliar substances always wear protection. Though I'd say at this point you're practically invulnerable from all the stuff I've seen you rub on your bare hands.

The blobby fame look so cool💜💜🥰

Hey chloe you are the 👍👍best thanks a lot for your entertaining videos 💜

Please please please if you use resin in the future wear gloves! I know a lot of people use resin without it but you really shouldn't because it is quite toxic. Nerdecrafter is good with resin if you need guidance. I would guess 100% acetone would work to get it off since I'm pretty sure that stuff would dissolve a whole car 😂

God that glitch effect is very effective my eyes were like 'what have you done to me!'

God I love this channel so much - you're reaction at 3:02 to your light falling over was just like "what now" lol

You're videos inspire me so much to make my own channel!!!! Thank you!!! I hope to be like to to be day!

I'm so glad you have a podcast! Not kidding - I've been looking for an art/creative talk podcast to listen to but haven't found one I liked yet. I'm excited to listen to it and can't wait to see what future episodes you create☺️

The ball chain pull sort of reminds me of those things in Avatar, in the forest, that fly off when they touch them. I can’t remember if they’re plants or bugs haha but they sorta spin and fly off.

I love your accent and your art! And your humor!

Hi Chloe bigggg fannnnn

"Why do children like the feeling of glue on their hands" I'm 9 years old and I hate it, it's just mess.

Yay!! Your podcast is finally out!! I am soo excited to listen to it now😃😃I hope you talk with rin too! Love you!

Okay the tray has so much potential tho I feel like if you covered it with leaves on the bottom then resin it would be soooo cute!

youtube: 1 view 9 likes 6 comments also I'm actually early for once! :D also love youuuuuuu!!!!! 🥰💕💕

When you early and can’t think of anything to comment btw love you chloe

Resin tips: the mod podge also sealed the bottom of the wood. Useful for porous materials. Dry plant matter first! It can react with the resin over time, browning the resin and the material. Silica gel (like you get in the little pouches in gift boxes when you buy them) can be used for this. A little does not go a long way. You'll probably need more than you think. You can figure it out by filling the area with water and using that to see how much resin you'll need by volume. Add a bit more to account for shrinkage. To anyone who got this far, you can find plenty of videos online! Artsymadwoman (I think that's what it is) has loads and she works with flowers and whatnot all the time. Rybonator is a good one for the geekier side, making dice and miniatures with a 3D printer.

The chain pull hack is actually a fluid art technique, the black base paint should be mixed with a pouring medium or water and poured on the canvas and tilted or spread to evenly cover the canvas. The paint on the chains should be mixed with a pouring medium as well or you can use store bought pouring paints as well. But that hack gave you zero information on how to prepare the paints. But you made it work better than I thought it would. I used to be a fluid artist myself that’s the only reason I know, it’s very therapeutic and I really miss it. But I really love you and your channel. Wishing you all the blessings life can offer.

Girl, cmon. You’re not “too old” to know what Rick and Morty is. it’s a raunchy adult tv show that isn’t new or anything and impossible to escape because of how popular it is. “Glitch” is just the effect that the art hack does because it makes the drawing look like when technology glitches out. The whole “I’m so old idk what’s hip with the kids!!” When you’re under 35 is getting so overused and annoying. Just because you don’t understand something doesn’t mean you’re like some grandma who can’t understand pop culture.

Fun fact : people who say that they are early are actually on time...

😂🤣 I laughed so hard at the Mickey shirt! Oh dear.

I’m so excited to listen to the upcoming podcasts!!!❤️❤️ Btw Me during the whole video: l o o k i n g a t h e r t s h I r t

I’m confused. None of these hacks are that “genius”

"This is a nasty green...it is disgusting. " - camera cuts to full shot and shows the shirt she is wearing that is featuring an image that is almost entirely the EXACT same shade of green. 🤔

dear Chloe I know you’re probably never gonna see this but I just like to say your art is amazing you are a huge role model for me! I love your editing styles and can’t stop and bindge watching all your videos. you inspired me to create my own art channel, also I’m not self promoting in any way. I myself also really like disney and art! I just said to say please never quit, because you have so many followers, And many many people who love you! you are very talented! never stop being you! ✨🥺

I think they used a colored pencil that's wax based for the Mickey tie dye, then dyed the Mickey, & finally dyed the rest of the shirt. The wax of the pencil will give a batik effect.

absolutely *loving* the lighting!!!!

to anyone that see's this have lovely day, you are amazing.

1 view, 4 comments

The way she so casually said "my light just fell over"😂

The watermelon hack looks so fun🍉

Thank you for trying the bead chain pull. I keep seeing the videos thinking there had to be something special about the paint.

I'm so excited for the podcast collabs!

Your tie dye actually looked really nice. Maybe you can appliqué like a Mickey head patch over that spot

Hehe watching you do acrylic pouring techniques was fun 😀 You need to do a few things to make it look like Wigglez's art, which really isn't specified.... but your attempt was great! 💜 Everything else was fun to watch too!