So imagine my surprise as I'm searching for tutorials on how to do this resin finish and the video I pick has my old friend Brad from Swallows! Great to see that you are doing well!!

Wear gloves and Eye protection. Place your art on the floor, on a dropcloth for best result of levelness. You can prop it on risers also, like yogurt cups, or coffee cans filled with rocks or sand. Tape edges of canvas to protect, or it may spill on the sides. You can also not cover sides, and use your glove to paint the sides in resin lightly. Pour Part A + B together in equal parts, mix in a cup thoroughly for 3-4 minutes, pour and spread it on the artwork, from center outward with scraper, which needs to be level or the resin won't be even. Try to push it just to the edge, so its not dripping off, but just suspended there. Wipe off if it goes over the side. Use a flame torch to pop bubbles if desired, like a torch from 12" away. You have 30 minutes until it hardens. Let it cure at least 24 hours, Covered in cardboard tents, so no dust gets on, and your good to go.

Amazing images all by themselves and the resin made them pop! Beautiful.

Thanks, I just bought resin and I am so scared. I love that you explain everything so well. TFS

you make it look so easy, your one chilled guy.

Totally brilliant! Superb 'Art Resin' finish.

Thanks for the Art Resin lesson, love your photography!

It's all how you market your work. Excited to try this product.

Thanks Brad. Love your work

Brilliant, thank you for showing this and for explaining the sides of the picture, they look fantastic - great video, easy to follow and very clear

Spectacular photos and work!!

Wow... first of all great pics!!! thank you very helpful I'm doing my first today!

Absolutely superb work! Thanx for trying this product.Just bought it and you have given me the courage to try it out! Thanks so much! Ps your garage is cleaner than my home ! Deb S.

That came out really nice!

These are awesome! The Antelope Canyon picture is great! From the angle you shot it the large rock in front looks like the face of an antelope👏👏👏😊

Makes it look so much better and no need for glass.

Your video is very helpful. I’m going to try it on my pyrography engraved artwork.

Excellent thanks for an very clear and precise how to do love you photos by the way

Beautiful Photography, loveeee it!

This was very helpful, thank you! Your photography is amazing as well.

Beautifully demonstrated thank you impressed by you beautifully ordered garage as well, you will be successful at whatever you do is what I think!

Your artwork was already WOW but with the resin its like OMG WOW AMAZING PHENOMINAL !!!!!!!!!

Thank u so much for this! Love the art and tutorials it really helped me❤❤

love your work

Great video bro! Awesome epoxy resin tutorial that could be used for any application. Big thumbs up!

That looks awesome!

Looks Amazing!

thanks brad!! brilliant video really helped me out

By far best tutorial thank you

Your garage looks like the perfect environment for this. Dust has been a struggle for me. Might have to build some kind of enclosure.

Beautiful work

Great work for sure, love the way they came out. I never used resin before but heard of it so I looked it up and this is the first video I clicked on. I do have a question. Did u have to do anything to your canvas before adding the resin so it doesn’t bleed or anything?

Looks so good

Great work!

Really beautiful

Thanks Brad this was super helpful

That art is great

His Missus is going to have a fit when she is looking for her towels! Expensive on towels!

Nice work!

Wow beautiful

video is simple and to the point. Are the frames heavier after resin? Sands of time is awesome! Good work Brad!

Awesome vid! Thank you so much!

I just painted an abstract painting using flat and gloss paint so it has an interesting look to it. Ifor I pour a resin over it will it turn everything to a gloss or will it stay the same with a glass hard shell on it?

Awesome video!

I like this one too. I have to find time to do all this stuff I want to do before I go...not enough time.

Thanks for the informative video.

I just subscribed, thanks for sharing! can I use this over spray painted poster paper and foam poster board?

Great video & phenomenal results! What is the temperature requirement for Art resin? I usually use Stone coat but these results with 1 coat are 👌🏼👌🏼👌🏼

Loved your video. The affect of your photos after the art resin was put on. Thank you for sharing

Great photos. Question: when I frame my photos with glass, I use non reflective. I'm just wondering how reflective the resin is? Thanks. 👍

i love those pictures! you were very helpful on some questions i had on resin. how did you know how much resin to mix up for that size picture? oh i also love the cars behind you!!

great video! thanks!

Thank you for the tutorial. Does this resin come in satin or matte finishes? If so, would/have you used those as opposed to the shiny used here?

I'm about to try this but my plan is to do that first layer and then to do a very thick layer on top of it. But I can't decide if I should just do the a big layer all at once. If it was just wood you would do a small layer and then a big one and then a small one . Random but have you been to The Narrows in Utah? It's one of the most interesting hikes I've ever been on and they can go pretty much as long as you want it to go because it never ends. A lot of it is walking through water, but the like the colors of the walls are gorgeous. And the way the light breaks through the ravine like way above you and it just like it gives you sight after sight after sight and never ends

Cool pictures love it your fan jaafar

this is the easiest explanation, thank you and i love your pictures!!!

can I ask you questions about your prints did you need to add anything to the photos for protection before putting resin over them?

Seeing them from the distance on the wall would have been nice

which brand do you use to glue your picture and which sealant do you use to prep your photo before putting resin on it?

I wanted to buy this product but need help in figuring out how much I need. I would like to coat 4 12x16 pictures, would the 32oz kit work? BTW your photos and canvas prints are amazing.

Thanks for sharing this video! Your photographs are amazing!! How much do those prints go for?

your photography is killer.

Do you have any support on the back side of the canvas to keep the surface level? and do you need to treat the canvas first to make it less porous?

I wanted to use this method for my photographs because I absolutely adore how it brings out the colors but then I realized that I didn't like how much glare it came from it. I'm so troubled about what to do! Is this an archival method? Thank you!

I have used the Devcon brand epoxy for Salt water fly tying. It yellows after some time exposure to the sun. Now that it has been a while, do you experience any yellowing or the coating not being clear anymore?

so what was a better quality the metal print or the art resin when it was finished??

Enjoyed the video! I make frames like those that your images are mounted to. Do you make your own or do you purchase them? I have a starter set of the resin on the way. Can't wait to give it a go! David

Amazing work!!! What glue did you use for the photos?

Hi I just watched your video, your photos are amazing and the demonstration was easy to follow. I have watched a number of videos recently and some presenters have stated that resin yellows over time. I'm hoping this isn't always true. Do you know how art resin performs in the long term. Is there any yellowing?

Thank u for sharing😊

Hey, did you treat your canvas print before applying the art resin? I've had a problem with canvas prints getting all crackled looking with other gel coats. I've tried Golden and an industrial brand. From chemical reaction? Or drying? Not sure. Is ArtResin safe for certain types of canvas prints and are the surfaces treated before using art resin?

I use a heat gun to pop the bubbles. Do you have any feelings towards using the heat gun verse the flame?

Beautiful!! Do you have to have a heat gun?

Good demo. So you have to wrap tape around all edges before pouring to prevent it dripping over. Thanks!

Great video! Where do you get your photos printed onto canvas?

Would this be good for black and white photos made with the Holga camera. The images will be soft focus.

How many oz are in the bottle? I have a big picture 4 ' x 5 ' . I need to do this, but trying to figure out how much to make. Thank you 4 your help!

Can you use resin on items that have been coated with acrylic varnish?

Thank you

Would it be wise to resin work and clear gloss spray it down?

awsm video.... sir can i use it on oil painting portrait

Hi, Beautiful photos!! Just wondering..... Can resin be used to cover artwork done in soft pastels, oil pastels and graphite?

Nice photos! The resin really makes for a beautiful finish. I can't quite tell in the video, and maybe you mentioned it and I missed it, but did you let the resin naturally drip over the edges or did you brush around the edges or did you tape off the edges and remove the tape leaving the edges sans resin? Hardened resin drippings are an issue for me and I'm just looking for ways to minimize the after-mess. Thanks for sharing, your photos are top notch!

Hello .may I know epoxy resin and lacquer hardener same thing .

Is this also Self Levelling?

Can you glaze transparencies?

It is better than framing,

Hey Brad, is there a concern about the apoxy yellowing over time? I did my first poor and it looked pretty good. But somebody told me I should put a polyurathane over to protect it from yellowing. Have you heard of this?

How much is dust an issue with this process?

Plea! has anyone found gaps (of no resin) and tried to fill them afterwards, ie when dry? Or would it work if I just overlaid a whole new sheet of resin on top, hoping it would fall in the holes, unnoticed?????

It seemed you used​ less than the square footage required am I correct?

Hi! Can i use it to protect art work in a cell phone case?

What is the liquid used on the canvas ? Just tell the name of bottle plz

I recognize that rock! That’s in Bryce Canyon right?

Did you apply varnish before resin?

thank you for this video and would like to ask you on what material the pictures were printed on?

Resin and hardener are manufactured to exact specifications. That said why don't you use a scale that has different weight measurements for example grams because that's more accurate than ounces. So if you had 200 grams of resin and just add 200 grams of hardener and mix it in "one container" that would be more accurate then scraping a container

Yes looks great but I always seem to get little dust speck .... what to do?

Can I use it on a poster?

So this resin didn't cause any kinda ink bleeding? That's what I've run into, been looking for something that won't bleed