@williamdoyle7887 Жыл бұрын
Ron, how tall is the tree with these specs? You said you were using dual stage asap build. Is the dual stage necessary?
@williamdoyle7887 Жыл бұрын
I will be using 24x100 next year and curious if the dual stage is necessary
@xTremeSequences Жыл бұрын
The tree is 16.5 feet from the first pixel to the last. The base ring is 1 foot above the ground. The topper is at 20 feet. The two stage is necessary for the Monkhouse assembly I have. In 7 seasons my tree has never fallen.
@williamdoyle7887 Жыл бұрын
@@xTremeSequences Thanks for the info. It really helps!
@xTremeSequences Жыл бұрын
@@williamdoyle7887 You bet!
@stevewhite8161 2 жыл бұрын
Great job and explanation Ron. I use this and like you have used it for years. I might need to reduce the spacing of mine between the strips. What is your spacing by chance?
@xTremeSequences 2 жыл бұрын
Thanks, Steve! The pixel spacing is 2" and the base spacing is 4".
@rffarms 2 жыл бұрын
Ron, how many pixels per strand, base diameter, and why all the extra wire length for run to pixels (coiled). Thanks for all the help you give the new guys.
@xTremeSequences 2 жыл бұрын
I currently have 100 nodes per strand but will change to 200 per next year to make it 1" spacing. The base ring diameter is 8'. The reason for the excess extension is because I was a noob in 2016 and thought I needed it.
@best49erfan 2 жыл бұрын
Hey Ron, for your poles on either side of the mega tree, how did you set those up?
@xTremeSequences 2 жыл бұрын
Here is a video I did the day before this one: kzfaq.info/get/bejne/jN2Zq81m0tW5fps.html
@williamrobertterry 2 жыл бұрын
How much of your overall setup time is spent on the mega tree?
@xTremeSequences 2 жыл бұрын
Probably six hours. Hammering in the rebar takes some time.
Fairy Pixel Dust
Рет қаралды 48 М.