Assembling Our Arched Cabin House Kit

Assembling Our Arched Cabin House Kit - NOT a Time Lapse

Рет қаралды 65,506

2 жыл бұрын

This is NOT your standard Arched Cabin assembly video!
We give you a good overview of what assembling your arched cabin house kit will look like. There's so much information that we have for you, I'll be posting another video with some Q&A next week as well. Please check out Bunny Butt Acres on KZfaq as both Rikki and Greg are such a wealth of knowledge and think so well outside the box on creative solutions. It was an absolute pleasure to work with them both.
I have a full update on the blog with the complete list of tools and fasteners we used, along with more info on what we would do the same and what we would do differently.
#assembling #archedcabin #housekit #ownerbuilder #fullvideo
Link to blog post about the costs associated so far with the Arched Cabin house build.
www.lazyaholeranch.com/?p=16827
Bunny Butt Acres - / @bunnybuttacres
Bunny Butt Acres Videos on our Arched Cabin Build -
(teaser video) • 11 | Colorado Road Tri...
Affiliate Links:
Hillman Fasteners that worked VERY well - amzn.to/3nLgxKK
Impact Driver (recommend one for each person screwing or drilling) - amzn.to/3ErreIn
Greg's Cordless Milwaukee Set - amzn.to/39j5ZtM
Bob's Cordless Makita Set - amzn.to/3hKDLg7
Drill bits from Ace (not affiliate) - www.acehardware.com/departmen...
Dewalt Impact Drill bits (not affiliate) - www.acehardware.com/departmen...
Fubar III - amzn.to/3lEJkOv
Come Along - amzn.to/3AmnLbC
Giant Tow Strap - amzn.to/2YXtQNJ
Buy soap & lotion from our website or view our blog posts.
All products are hand crafted by Ali. lazyaholeranch.com
Become a Patron! - / lazyaholeranch
Try out Odysee - like KZfaq, but you can tip with crypto! (Affiliate) - odysee.com/$/invite/@lazyahol...
Visit us on FB and Instagram @lazyaholeranch @lazyaholepets @lazyaholesoap
Try XeroShoes - for all your minimalistic footwear needs! (Affiliate Link): xeroshoes.com/go/lazyaholeranch
Sign up for Kindle Unlimited (Affiliate Link) - amzn.to/2X6LI4L
*Unlimited reading from over 1 million ebooks
*Unlimited listening to thousands of audiobooks
*Read on any device
*Membership plans are also giftable
Try Audible Premium Plus and Get Up to Two Free Audiobooks (affiliate link) - amzn.to/3hILNoH

Пікірлер: 186

@LazyAHoleRanch 2 жыл бұрын

Buy soap and lotion from the shop to help support our channel, and check out our blog while you're there to learn more about the costs associated with building an arched cabin. lazyaholeranch.com

@MrRambo50 2 жыл бұрын

Where did u buy your land because I am looking for land to buy like what u have

@lisadeyton5368 Жыл бұрын

@sasquatchrosefarts Жыл бұрын

Don't be afraid to cut the bottom inch off a drill bit if it's too long and flexy. Use a chuck drill and you can use custom shirt drill bits

@TheMomentEnds1 Жыл бұрын

Regarding screws and pre drilling and breaking screws. Elco Dril-Flex self-drilling screws would go through that gauge steel like butter There’s shear and pullout charts online and come a variety of sizes / threading/ lengths. Prob 1/4-20. …threading depends on thickness steel you’re drilling into.

@TheMomentEnds1 Жыл бұрын

Additionally Would suggest predrilling clear holes in the arch tube female part before installing in place, then run your dril-flex screw. A 1/4-20 screw would need a .266 DIA clear hole….or Drill Size H

@LazyAHoleRanch Жыл бұрын

Thank you so much! This is all wonderful info. ❤️❤️

@daveg5687 Жыл бұрын

Thanks for taking the time to make the video. But I have one serious safety concern when picking up the arch a piece of equipment is needed to pick the arch straight up. Pulling the arch up puts incredible strain on the bottom where it is attached to the deck. Also the pulling bows the center beam. I would have spent the money ($250 to $350) rented a Sky Trac for the day to be able to pick this thing up safely without pulling on it. Straight up would be best and safest.

@cbow7961 5 ай бұрын

I'm only about halfway through your video. That's a lot of work. All the other videos I've watched of putting arched cabins together were completely different assembly. Glad y'all got it done.

@LazyAHoleRanch 5 ай бұрын

A crane is definitely helpful and if you put together one side of it first, you can probably find a local person with a crane and get away with it for under $200

@cbow7961 5 ай бұрын

Thank you!

@clintondoner1133 11 ай бұрын

LOVE THE SHOW GUYS!! AND SHAPE OF YOUR HOME IS KOOL!!! AND THE VIEW IS AWSOME!!!

@LazyAHoleRanch 11 ай бұрын

Thank you ❤️

@okiehippiefarm 2 жыл бұрын

Thank you for the videos. I’m a little behind you but preparing for my Arched Cabin delivery on June 1st. Documenting my journey as well and have my piers completed and about to begin the subfloor. Your videos have helped me to know what to expect, so grateful

@LazyAHoleRanch 2 жыл бұрын

Congrats on getting your build started! I'm so excited for you!

@HaroldReece Жыл бұрын

Every time you do something for the first time there is alway a learning curve. You folks did a nice job. Thanks for sharing.

@LazyAHoleRanch Жыл бұрын

❤️❤️

@Pheyora 2 жыл бұрын

Me. A lone female thinking I can do this solo. Talk about a slap to reality😌✌🏽. Imma have to save up for the help.

@LazyAHoleRanch 2 жыл бұрын

You know, it definitely has its moments. 100% solo? There are parts where you'll for sure want someone else to assist, just for safety. It's definitely been daunting as hell, especially for a bundle of anxiety like I tend to be LOL. But in the end, every moment of that has been so worth it. This experience of learning how to do all of this has been so empowering and uplifting in general. I was talking with my friend a few months ago about how I couldn't even stand up to use a shovel when I started all of this, and now I'm carrying beams around and framing. If you really want to do this, and I'm able to get to wherever you are, I'll happily scrub in and help you. I see the little arched cabin owners like a little community of enthusiasts. Something like the VW Bus or the Jeep crowd. Will there be horrible moments? Hell yes, but I really believe that we can all be empowered to make things happen for ourselves.

@Pheyora 2 жыл бұрын

@@LazyAHoleRanch Thanks for sharing your journey. I'm looking around to see if there are any arched cabin builds in the area that I can volunteer on. (For more hands on experience.) I built out a van to live in by myself ( lived in it for 2 years) so i figured why not a tiny home? I'm located in LA. Im looking into Kern County zoning and building code for my arched cabin build.. (Commute 2hrs for my entire-weekend shifts in the city) But yeah I am 100% solo. I figured going onto angies list for extra hands when the time comes. But it wont be for like 4 years. Just good to know my limitations, and your videos have helped me realize them. Please keep sharing, I've been following arched cabins since before living vanlife. To see a community grow over the years has me EXCITED.

@hoppinglark 4 ай бұрын

So...Did you get yours built?

@leeanntackitt50 Ай бұрын

We are using scaffolding instead of ladders. Great video...gonna keep following. Ya'll are very thorough 🤘😎😊

@LazyAHoleRanch Ай бұрын

A wise choice! We took a massive hiatus but are planning on doing some framing and getting it dried in over the next few months. We might rent a bucket for the roofing.

@deniseunknown4576 3 ай бұрын

Wow, thank you for the insight. Definitely a learning curve. Might have to hire you all to build them now that you got it down to an art-lol. Very informative-appreciate the details of what worked and what didn’t.

@LazyAHoleRanch 3 ай бұрын

Glad I could help someone get some info from our experiences ❤️

@nathaliemurphy358 2 жыл бұрын

Thank you so much for taking the time to document your build. So informative

@cassiecriket 2 жыл бұрын

Oh my gosh this is SO cool. Thank you for sharing this process!!

@LazyAHoleRanch 2 жыл бұрын

Thank you. I’m just happy to be of service ❤️

@4_Science Ай бұрын

5:22 - having seen how much force was required to bend the ribs to get them onto the ridge pole, I probably would brace about 1-2in further out. then once the ribs are all loosely fitted into position, tighten the bracing (like by adding a few new pieces tighter to the joists) to bring the ribs and ridge together before adding fasteners 👍

@BakaDeru 2 жыл бұрын

I'm so glad this was the newest episode! It looks fantastic, I can't wait to see further progress!

@LazyAHoleRanch 2 жыл бұрын

Next week will be a more step by step version of this with more info on the process ❤️❤️

@bunnybuttacres 2 жыл бұрын

It was so great to meet you and help with the build before ours comes!

@LazyAHoleRanch 2 жыл бұрын

We are eternally grateful for your assistance and your knowledge, wisdom, and innovative thinking. Y’all are awesome!

@bunnybuttacres 2 жыл бұрын

@@LazyAHoleRanch We had a blast! Can't wait to have you down for a visit... and maybe a hand when we put our kit up! tee hee

@matthewkruse8026 Жыл бұрын

My two favorite quotes from this are as follows... *Go nads and strife" and also " Riiiiicoooolaaaaaaaa". 🤣 Well done on the mini house this is goals for soon future for sure 😊

@tracyshudo9972 2 жыл бұрын

So proud of all of you with great info..

@LazyAHoleRanch 2 жыл бұрын

Thank you!

@EHeller 2 жыл бұрын

That was awesome. BEST. ENDING. EVER.

@LazyAHoleRanch 2 жыл бұрын

😂😂

@nunyabizness1004 2 жыл бұрын

i'm still getting caught up, thank you so much for documenting this! yall are gonna hit 1k in no time!

@LazyAHoleRanch 2 жыл бұрын

It's been so going, but we really appreciate the support of everyone

@triplea116 2 жыл бұрын

So excited watching this. Almost ready to pour our concrete for our pier and beam.

@LazyAHoleRanch 2 жыл бұрын

putting out the step by step video in just a few minutes! Just finishing up some comment section and description stuff now!

@triplea116 2 жыл бұрын

@@LazyAHoleRanch thank you we have out holes dug. Road base in the bottom. Almost ready to pour our concrete.

@triplea116 2 жыл бұрын

@@LazyAHoleRanch we really do love your videos. Me and my wife need all the help we can get. Between work and two boys 6 and 4. It's hard but we are doing it.

@cherylalastra Жыл бұрын

This pretty cool❤

@j.j.maaskant7287 2 жыл бұрын

Nicely done !

@LazyAHoleRanch 2 жыл бұрын

Thanks! Slowly getting there!

@paulstevenson1712 2 жыл бұрын

Love It Great Job

@LazyAHoleRanch 2 жыл бұрын

Thank you ❤️❤️

@mikestrickland1312 2 жыл бұрын

OSHA literally just fell out of there seats at you guys working under that hanging steel wall end!!!! lol Great work.....YOLO

@LazyAHoleRanch 2 жыл бұрын

Hahahaha sometimes in life you just have to throw caution to the wind.

@theHOONeybadger 2 жыл бұрын

Hard to tell, but when the self-tappers kept snapping, it looks like maybe they were too long. If so, I bet they were bottoming out on the other side of the square tube, and that wouldn't allow the screw to keep going, causing the heads to twist and snap. Switching to the shorter 1-1/2" size was a good idea. 1" probably would have even been long enough. Thanks for sharing this video. Contemplating getting one of these myself for my property, so all this information is helpful!

@LazyAHoleRanch 2 жыл бұрын

That is definitely a possibility! Something to keep in mind for future portions with the self tappers.

@MrSouthofBoston 2 жыл бұрын

Interesting concept.

@LazyAHoleRanch 2 жыл бұрын

They are fun little buildings!

@gocanada9749 2 жыл бұрын

IF YOU cut a 2x4 to the right length, you can put it under the MIDDLE of the arched tube and the end should just pop in !,, TRY IT

@LazyAHoleRanch 2 жыл бұрын

That's a great idea to try! Thank you

@gocanada9749 2 жыл бұрын

@@LazyAHoleRanch LOT EASIER than using a human body to do the same thing ! I saw them straining like hell and thought, there has to be a better way !

@ramonarredondo1805 11 ай бұрын

Hi. It's a fantastic structure for a countryside cabin. Would you mind in sharing the different measuments of those steel bars used please. Regards from Valdivia, Chile

@maegardnermills4292 Жыл бұрын

Will you need bracing between each arch support? It looks like it needs more framing. Windgust, updraft plus straight-line winds have they been put through the test?

@LazyAHoleRanch Жыл бұрын

Once you put those floor joists in for the loft, that’s going to do just that. I know they’ve been built in hurricane zones, and it’s handled some pretty intense wind up here thus far.

@ramonarredondo1805 11 ай бұрын

Hi. It's me again. If the bows are 2" x 2", what are the measurements of the short irons where they are embedded? And what size is the beam on the top?

@marnildobezerracorreia7577 2 жыл бұрын

Gostei muito, farei uma casa assim.

@LazyAHoleRanch 2 жыл бұрын

é uma casinha divertida!

@Kdawg101 Жыл бұрын

Amazin! Love your foundation idea instead of a slab! Curiuous exactly how you did it? How did you anchor the floor frame to the ground/Foundation?

@LazyAHoleRanch Жыл бұрын

I fabricated and welded some “clips” to the beams using I think 1 1/2-2” angle iron with a couple of holes drilled into them. Here’s a link to the video where I did all that if that helps. kzfaq.info/get/bejne/m9Rmi7h71Zu9qqM.html

@kllisk 2 жыл бұрын

You saying you're done is funny because it is a long way from done, enjoy the journey!!!!

@LazyAHoleRanch 2 жыл бұрын

🤣🤣 well yeah but as far as standing the kit up goes. That was a moment ❤️ framing this weeeeeeeeek ❤️❤️

@nunyabizness1004 2 жыл бұрын

ok but i bout had a heart attack at 13:00 😲 hard hats? keep clear! 😱 omg 14:49, i may be too faint of heart for this one lol

@LazyAHoleRanch 2 жыл бұрын

Yeah, lessons were learned. HAHA

@b0b0- 2 жыл бұрын

Cutting oil or even WD-40 on self tappers will make a world of difference. Glide right in.

@LazyAHoleRanch 2 жыл бұрын

We will try that on the loft joists. Thank you!

@carolgonzales8667 Жыл бұрын

How are these temperature wise are they warm in winter and cool in summer? Do they need to be heavily insulated?

@LazyAHoleRanch Жыл бұрын

We have code requirements for R value. We intend to spray foam the interior, not sure whether or not we’ll use the insulation we got with it, or if we do it will be after the spray foam. It’s not done yet so I can give insight as to how it will do as far as a tight seal but the spray foam should keep it water tight and well insulated

@anthonybarbuto6012 2 жыл бұрын

Great video..,.glad u got this far. I wrote u before about insulation. I ant to use 2x10 in the floor to put an 8 inch batt in the floor either mineral wool or paper....,the walls and ceiling wood be 8 inch bats from the floor over the top to the other floor. What are the spaces between the ribs 24 inch? How can you hang bats between the ribs use a net or wires? .....I contacted rock wool company but they never got back to me. I have a suggestion for u. To finish the interior I was going to use ship board on the straight walls and thin plywood where the walls curve. I read that there is a lot of free wood if u scrounge pallets. The pallets can be disassembled.....sanded.....cut to uniform length and installed on the walls........!!!!!! One thing tho. Ship lap has an edge killed to allow the boards to lock when they are stacked horizontally. Also the killed edge allows for a uniform gap between the planks and acts as a moisture shield so water from say a bathroom.....any hi humidity are does not go behind your all into the insulation. So if u use the pallet wood u need to rip this edge on the board or else put a moisture barrier under the boards and use spacers between the boards before u nail them. What do u think about the pallet wood? Appreciate help re the insulation. Also what about a one inch bat across the outside of the ribs under the siding? This layer would eliminate thermal bridging.......thru the ribs into the house!.....let me know.....regards a. Barbuto......barbuto@optonline.net.

@LazyAHoleRanch 2 жыл бұрын

Sorry I just saw this message. Well the kit comes with some insulation, so you put that down between the roof panels and the ribs. I’m not sure that you could fit anything else between the ribs and panels without causing issues. The ribs are 24” apart. I’m not sure on the boards either. That’s all Mike’s domain on this. Not sure how we want to finish the interior yet. Mike says there are 24” bats of rock wool so that would work. He says maybe a layer inside between ribs and whatever you are putting on the walls, but he doesn’t think you would be able to between roof panels and ribs because those screws are 3/4”

@Odin230 Жыл бұрын

@Lazy A-Hole Ranch What is the name of the music playing in the beginning of the video?

@LazyAHoleRanch Жыл бұрын

I’m sorry, but it’s been a couple of years so I have no idea. I know that it was part of the free music library on KZfaq at that time because that was where I used to go for my music.

@cinejan Жыл бұрын

I would love to do this I wonder if you have a guide book or something to help us cause you learn so much. Did you have a Permit and those kinds of things to navigate?

@LazyAHoleRanch Жыл бұрын

I don’t have a guide book, but we periodically update a blog as we go with costs and such. You can find it at lazyaholeranch.com

@georgecristian3468 2 жыл бұрын

Could you please tell me what is the dimension of the steel "ribs"? LxlxH + diameter on the inside and the outside?

@LazyAHoleRanch 2 жыл бұрын

It’s 2” square tube. Not sure of wall thickness or any of that at this point. It’s definitely going to depend on the size of the cabin you get. I would check with maybe Bunny Butt Acres since they have easier access to take that measurement. Since our stuff is together, it’s a little challenging to grab that measurement.

@mikebeasley553 2 жыл бұрын

Cobalt bits are significantly better than the the titanium bits . Trust me I use them every day.

@dawood121derful 2 жыл бұрын

Thanks Mike for sharing that.

@jlee7063 2 жыл бұрын

What about a lazy-a-hole?

@xod7861 2 жыл бұрын

I want one of these

@drape47 Ай бұрын

Nice reference to some classic Three Brain 20:19

@LazyAHoleRanch Ай бұрын

😂😂❤️

@cinejan Жыл бұрын

I would love to do this and I would like to know from you if you had experienced people or you felt like you needed to have someone with building experience on the team? Also did you need a permit? How did you navigate the permit?

@LazyAHoleRanch Жыл бұрын

Mike is fairly handy, so that has been very helpful and I’m just learning as I go. The house kit itself wasn’t bad to put together and took us an afternoon with 3 1/2 people (I mostly filmed) Had to get a permit, oh my god that was a mess lol. A lady at the permit office helped me sort out what I needed. Had to hire an architect to finish out the floor plans, but arched cabins also has an engineering firm they work with who can help do those plans. Our planning office actually had a checklist of what we’d need to file the permit. I would start with your county office and see if there’s anyone willing to just take some time to answer questions. They’ve been super nice here every time I’ve called to clarify this or that.

@carlosvillalta9974 11 ай бұрын

Nice video. Nice house! Did you find your own architect to submit plans to the county

@LazyAHoleRanch 11 ай бұрын

Yes. We bought their basic plans, but did need to hire an architect to complete several drawings in order to make those plans complete for the local building department

@lakebruhh 2 жыл бұрын

would u talk about how connecting up to electric and sewer went and the cost to do so? thinking about going this route

@LazyAHoleRanch 2 жыл бұрын

If you visit the blog on our website I have a post about the power. Sewer is septic here,and that was in place when we got here so our only septic cost has been for a couple of repairs when a pipe was hit excavating In the driveway, and some pipe to run from the tank to where the house will be. HTTPS://lazyaholeranch.com click on blog and then look for the post about power. It will be likely 2018 or 2019 for that. I believe it will be November. (Pretty sure it’s 2018)

@LazyAHoleRanch 2 жыл бұрын

Here’s a link to a video where we touched on the power drop kzfaq.info/get/bejne/gaxdZLxh1L3QaZc.html

@fshah48 Жыл бұрын

What is the section of the ribs?

@LazyAHoleRanch Жыл бұрын

If you’re wondering what the ribs are made of it is 2” square tube. Might be about 14 or 16 gauge steel.

@EYE_SPIDER Жыл бұрын

New to the channel! @Ary Dabirnia sent me over from his last mail call video!

@LazyAHoleRanch Жыл бұрын

❤️❤️ we adore Ary and so many others from the UTG nation 😍😍 welcome!

@kimberli2391 2 жыл бұрын

Interesting

@LazyAHoleRanch 2 жыл бұрын

Always!

@dawood121derful 2 жыл бұрын

Do you have a video on how you built your foundation and subfloor?

@LazyAHoleRanch 2 жыл бұрын

Here is the best place to start for the foundation stuff. kzfaq.info/get/bejne/p9VorbKY3bSdlqs.html

@LazyAHoleRanch 2 жыл бұрын

Here’s the start of getting the beams into place and stuff Welding the Beams for our Arched Cabin Foundation #127 kzfaq.info/get/bejne/eMB_rbKIu7e5oGg.html

@shawnasummers4647 11 ай бұрын

I like your ranch name.

@LazyAHoleRanch 11 ай бұрын

Haha thanks! ❤️

@cinejan Жыл бұрын

How long fid it take

@LazyAHoleRanch Жыл бұрын

An afternoon

@lmd2454 10 ай бұрын

I was seriously holding my breath and cringing watching y'all stand under that center beam that was being held up by the bucket with strapping, while screwing in the bracing for the other side. And again when watching the first side dangling precariously from the wench!! OSHA would croke watching y'all put that together!! Screwing in the second side bottom bracing before assembling the first side seems like a better idea. You could lay 2x6s on the top of the pegs and set the center beam on that, which would have given it a bit more height and made it a little easier to put the first side together. But you DEFINITELY should have used some long kickers and cross braces to hold that first side up while assembling the second side. If that strap or wench failed, somebody would be dead. Glad it all worked out for you in the end. We will be assembling a couple of these in the next year or so for our oldest sons. Thanks for sharing your process!

@Splashstar216 2 жыл бұрын

damn. that looks hard af to assemble by urself! how'd you find all those builders?

@LazyAHoleRanch 2 жыл бұрын

Greg and Rikki wanted to put their hands on one before building their own (they are Bunny Butt Acres here on KZfaq) and Bob is a friend and contractor that’s been working next door. He just happened to show up while we were assembling and jumped in. I have started a Facebook group as well as a Reddit group called Arched Cabin Builds to encourage people to scrub in and help each other with their builds. I’m planning on going to NM in April to help Bunny Butt Acres assemble their kit.

@LazyAHoleRanch 2 жыл бұрын

And honestly once you figure out the pivot point on the ribs, it’s really not too bad to stab them in with two people.

@xod7861 2 жыл бұрын

Buy a bunch of bits for pilot holes and some tapmagic

@LaNoire27 2 жыл бұрын

What's the length and width of one rib?

@LazyAHoleRanch 2 жыл бұрын

They are 2" square tube, and I'm sorry I don't know the overall length. I can tell you that the total height of the cabins are as follows according to their FAQ. Q. What is the height of an Arched Cabin? A. The 8' wide Arched Cabin is 8' tall, the 12' wide Arched Cabin is 10' tall, the tall 12' wide Arched Cabin is 12' tall, the 14' wide Arched Cabin is 12' tall, the 16' wide is 14'6" tall, the 20' wide is 17'4" tall, the 24' is 18'8" tall, and the 30' wide is 17'4" tall. All these heights are to the top of the ridge beam which is 4" thick.

@LaNoire27 2 жыл бұрын

@@LazyAHoleRanch Ah, I see. Thank you so much for responding with this info. Seriously thinking about buying one of these.

@cindychurch925 Жыл бұрын

New subscriber

@LazyAHoleRanch Жыл бұрын

Welcome!

@user-te5sr8fm3p Жыл бұрын

i did not get the size of this cabin

@LazyAHoleRanch Жыл бұрын

20 x 32

@user-ew1gf5pj1d 2 жыл бұрын

👍👍응원합니다 👍👍🇰🇷

@LazyAHoleRanch 2 жыл бұрын

감사 해요. ❤️❤️

@chriscraftsman3898 2 жыл бұрын

***tractor supply self-tapping screws are far better quality than whatever is available at Lowes or home Depot.. (Lol, y'all just mentioned the crap screws were from Lowes as I was typing that comment)

@LazyAHoleRanch 2 жыл бұрын

lol we got the good ones at Ace, but I’ll start checking the ones at tractor supply too!

@chriscraftsman3898 2 жыл бұрын

@@LazyAHoleRanch they're also cheaper on galvanized bolts and hardware than the 2 big guys..

@rottendrestantje 2 жыл бұрын

This build proves that brute force can make up for smart thinking

@LazyAHoleRanch 2 жыл бұрын

I'm just glad to be living our dream, and out here doing the work. I look forward to seeing your project come together. Have an amazing day!

@danthoreson4062 Жыл бұрын

tell us more about the rabbit

@LazyAHoleRanch Жыл бұрын

follow the rabbit

@Nature-bt5ip Жыл бұрын

Is the floor made of steel I-beans ?

@LazyAHoleRanch Жыл бұрын

There’s a post and pier foundation with I beams on top, and then we put the floor joists, rim joists, and subfloor on top of the ibeams. We made a bunch of brackets to attach those floor joists to the beams and welded those brackets to the ibeams.

@Nature-bt5ip Жыл бұрын

@@LazyAHoleRanch solid

@loading4354 Жыл бұрын

DIY metal drill?

@tyrtle7081 2 жыл бұрын

You really should've welded those joints where the beams meet, great video and fun watching though.

@LazyAHoleRanch 2 жыл бұрын

You mean instead of the self tapping screws? That's all per the kit instructions.

@bunnybuttacres 2 жыл бұрын

I actually asked Arched Cabins about this. This was their response: Welding vs. using self tappers is the same as far as structural integrity because the stubs that the ribs slide over are welded. You can weld them if you want, but it's just more time consuming.

@tyrtle7081 2 жыл бұрын

@@bunnybuttacres I genuinely just thought that welding was better for integrity. I didn't mean to come off rude or anything if I did. I love this cabins and these videos are so cool, best of the luck with your building!

@bunnybuttacres 2 жыл бұрын

@@tyrtle7081 Not taken as rude at all. It's something that was discussed while we built the one in this ep. And I was curious myself since there's already so much welding involved, it was a logical question to ask.

@kayk8389 2 жыл бұрын

22:18 Thanks for the sudden loud screaming.

@LazyAHoleRanch 2 жыл бұрын

glad to be of seervice!

@oneofgodschildren 2 жыл бұрын

Why weren't those pre drilled out?!

@LazyAHoleRanch 2 жыл бұрын

They just don’t come that way.

@wilhallman2890 2 жыл бұрын

14:50 man y'all are crazy lucky that entire thing didn't fall on one of you!

@LazyAHoleRanch 2 жыл бұрын

That was definitely a moment!

@cherylalastra Жыл бұрын

From Arty dabirnia

@LazyAHoleRanch Жыл бұрын

Ary is the best! We just adore him ❤️❤️

@hikebike118 2 жыл бұрын

Why wasn't everything pre-drilled? Am I missing something? Arched Cabins claims how they do this to make it easy. This is ridiculously easy for Arched Cabins to do. So why not do it?!? The home owner shouldn't have to do this, a major pain and massive time waster!

@LazyAHoleRanch 2 жыл бұрын

yeah there's no pre-drilling. All very DIY.

@kayk8389 2 жыл бұрын

Yeah they do claim it's pop up and go...obviously not. For 12-15 grand your not getting much

@junicohen7918 Жыл бұрын

It's not that hard

@danthoreson4062 Жыл бұрын

are you kidding? that's not a very difficult task

@brianpeterson5559 5 ай бұрын

Stop whining and drill

@TheOldGuyPhil 2 жыл бұрын

Too much fighting the rib. Just put one C- Clamp on each end of the rib.... Come along to tension/bow the rib and there's your dinner.

@LazyAHoleRanch 2 жыл бұрын

Once you find that pivot point they pop right in as well!

@xod7861 2 жыл бұрын

You have to center punch it? Wow can't believe u don't know that

@This-Is-My-Little-Corner 10 ай бұрын

@mikebeasley553 2 жыл бұрын

Ok. That ended weirdly!

@LazyAHoleRanch 2 жыл бұрын

how so?

@mikebeasley553 2 жыл бұрын

@@LazyAHoleRanch You are kidding right?

@LazyAHoleRanch 2 жыл бұрын

🤪🤪ha sorry sometimes my sense of humor is a little dry 🤪🤪

@mikebeasley553 2 жыл бұрын

It's all good. You are a little kooky.

@tonitouchberry6257 Жыл бұрын

I'm sorry....all was well...until!!???????

@LazyAHoleRanch Жыл бұрын

Eh stuff happens

@butchgoodwin Жыл бұрын

Interesting video, the arch was cool, the safety harness was not, it was miss leading, to use a harness to a rope that the other end is wrapped around then arm of a person is wrong, if a fall happened both would have been badly hurt, the rope should have been secured to an anchor attached to the structure. Next item at the end your in the harness being hoisted, you do know that can result in death from suspension death, the blood goes into your legs and the harness prevents to from leaving your legs.. please google suspension trauma

@bryanford1139 2 жыл бұрын

Jesus Christ!!, someone's gonna die on this jobsite.

@LazyAHoleRanch 2 жыл бұрын

We could all die at any moment.

@maegardnermills4292 Жыл бұрын

Professional need to be on that job for sure. It doesn't look stable at all. The tubes don't cover much. It is a horrible project. Wanting a kit and happy is okay but have these structures passed any stress test?

@xod7861 2 жыл бұрын

Wow .. look very confused. These are easy to build.. compared to a steel span ..

@puppygadget3189 Жыл бұрын

Not safe for cute puppy

@sheryl146 6 ай бұрын

Really can’t stand that camera ham!! She never stops

@LazyAHoleRanch 6 ай бұрын

Hey, I enjoy my life, and I’m just going to keep doing that! 😂❤️ and hey, I hope your day is awesome and you find something to laugh at.

@jstkeeps 2 жыл бұрын

Like watching a train wreck in slower motion.....

@LazyAHoleRanch 2 жыл бұрын

You’re so sensitive. Maybe you need a thicker skin.

@maxammo6282 8 ай бұрын

I was like oh cool and then I seen the blue hair we all know what that stands for. I'm out I can't support people who want to destroy the country that they live in.

@LazyAHoleRanch 7 ай бұрын

😂 something about judging books by covers. Just because one enjoys colorful hair does not mean one agrees with everything that others with colorful hair are into. It just means I like colorful hair. I will say though that I just think people should be left alone to do what they want if they aren’t hurting anyone else. I don’t think there’s needs to be a law for every little freaking thing. Mike likes pew pews, you’ll see one in many of our videos, and we live in a rural area. Away from people. Because people are peopley. So you can hate the hair all you want. It’s just hair and it doesn’t stand for anything other than I’m currently digging on the color purple. (Blue when I made this video)

@maxammo6282 7 ай бұрын

Yeah I understand where you're coming from. You are failing to realize the atmosphere that you are a part of. You seem to be very nice by your reply. The people with the blue hair are part of a political ideology regime . So basically you're guilty of wearing gang colors and you're not even in a gang. Do you know what I mean. Most of these people describe to a lifestyle that I despise and goes against the good Lord. My advice to you is to know your surroundings and know what is the so-called uniform of certain ideological occult. So basically you're just asking for trouble and you don't even know it. You best wise up to the ways of the world and choose a side. You are not pardoned by your ignorance of unwritten rules of today's society. And then you're going to say I'm judging a book by its cover when you are purposely changing that cover to make a statement that's pretty hypocritical in itself right there another lesson you need to learn. All I can say is good luck it seems as if you're really going to need it when it comes to common Sense.

@jstkeeps 2 жыл бұрын

Get the right training before you suggest the proper fasteners.... never blame the tool.....these videos mock the years of work I've put in to my trade.....building everything all that people use everyday to live and keep society thriving....from start of life to the end....please respect the true workers.... not the attention seeking wanna bes..... Do stuff.....ask for educated people to teach you!

@LazyAHoleRanch 2 жыл бұрын

Then get out there and teach. I’m here to learn.

@This-Is-My-Little-Corner 10 ай бұрын

What kind of comment is this actually? I mean seriously. This is a kit that people buy to learn to build it. It’s supposed to be simple. If they wanted a general contractor, they would’ve got a general contractor.