The song at the end always gets me feeling alright like I can forget about my problems and go pull some engines at the junkyard. Always look forward to the videos my boy.

a man without words but skillful with his hands.. 👍👍👍

the next natural step for you is a shop with your name over the door

Love the ASMR videos! The only thing that could make these better for newbies like me is if you'd list on the screen every thing you're holding or touching in the video! For people like me it's a huge help to learn what each of these parts are that you're adding on in order to completely build that K24. Of course I know what spark plugs are, and some very basics, but there's a few parts in the video where I was like "I think I know what that is.." but not 100% sure and would love to learn/know! Thanks for the uploads! Every video of yours I watch I start to slowly build more confidence that will hopefully one day lead to me building my EF Hatch! I've always felt like I'd fuck everything up when it comes to this kind of stuff, so because of that fear, I stay away! I feel like I have to know EVERY LAST DETAIL before I can feel confident enough to start working on my EF. I know.. I'm lame! But.. I do build computers from scratch and I know many have the same anxiety about computers that I have towards working on cars!

This guy is a legend.

This was satisfying to watch and to hear the cordless tools work.

Nice no bullsh!tting head to the ground ass Kicking to finish the build

Tag, Digging the silent film. Straight to the point.

Excellent video, thanks for your hard work and taking the time to set up to acquire some great shots.

That's the man on point I love your videos Keep knowing up Play man peace

Dana. Maybe build a tarp wall to give you some privacy for when your working in the driveway. Worth looking into. We know you miss the bushes

Excellent work! I forget, did you do a compression test on this engine when you first got it? Just surprised you didn't opt for some fresh rings after seeing the lack of maintenance this engine had in the last video. Either way, excited to see the install and hear it run!

This was entertaining to watch. I really like the garage setup, especially the engine build knowledge 👌🏾

Progress is better than no progress 💯 👌

builds looking good me and Queen B just got a roller going to build another civic after what happen to our last civic keep up the good work fam much love hope all is well!!!

beautiful work by the way much love my brotha

can always trust Dana working on any D,B,K,J Series motor great job Static😊

This was so satisfying to watch ✌🏽

excellent work Dana 😄😄😄😄

As always, Amazing work

Love the outro music

Keep up the great work! I Enjoy all your content

You definitely got skills!!! Great work

Great job dana. Nice build. Its coming together. 👌🏻🇳🇱

Use Honda Grease on the imput shaft in the future, protects the bearing

Great stuff!

Static it's time for you to elevate your situation. Back yourself and your skills bro.. You're 100% legit on the tools you can have your own custom workshop

Great video, keep up the great work!

So fresh

Great video 👍

Always wanted to learn how to build one

Jus watching this and I’ll be delaying doing mines. Bought a short block 06 k24a2 from pick n pull and still debating if I should jus slap on my z1 head on it or rebuild the bottom block. Been down for almost a year now. Been slacking too much

That’s right bro puttin in that work 💪🏼💪🏼

Hell yea right on time playa

You inspire me to parts hoard too

Man petting those cams in reminded me of dj qbert mechanic style 😅 ❤ ur pics = a thousand words 🙌 If u feel like helping me out with a build lmk, obviously I'd 💰 👍 I'm here in sj, thanks 😊

4:10 I just watched his video before watching this 😂😂

Careful with the radio in the back don't want you getting another strike Dana 🤕

Keep up the great work watch the entire video and give it a thumbs up and shared♡♡♡♡

F-n amazing!! Can you make this car beat that green integra in Vegas?

This is like tv for me especially it being a eg hatch i got one myself and i need motivation to build mine im tryna swap everything from my coupe over to the hatch

you should get a chain fall or a chain come along for your hoist be faster and safer

Putting in the work 😅

Hell yeah!!!

Yessss❤

Am i the only one that thinks he should do more pov , but with a chest mounted gopro?

Literally ANYONE else uses there impact to torque bolts I hard cringe. But I know Dana a damn pro with the ugga duggas. I got money its within 2lb of required torque!

Let's goo!!!

I thought each bolt has to be torqued, idk what’s the correct thing to do or not anymore😅 and what’s the name of the drill you using?

You know there's brace for the pistens to brace the head on high boots

🤘

👍

I do the same torque specs on my motors

the funny part is that you never clean the pistons or change the pistons rings and clean the block wall freshly built engine. let see how long will that block last

Just watched some art thanks bro

What do you do with the crank pulley bolt to tighten.? Just with the impact or do you torque ?

Hey static have you done a D series motor in the past? I have a 95 dx that I wanna take out everything and redo the gaskets.

Why did you take apart the oil pump in the beginning?

When you gonna hit the PO Box ❤️

did you use a k20 starter or the stock automatic k24a2 that came with the motor?

What trans did you use I am trying to go back and find out in your videos but can’t seem to find it.

🔥💪

Que bueno hubiera sido un tutorial de como modificar la bomba de aceite y todos los componentes que hay que cambiar para hacer el cambio de bomba.

I know you don't answer comments but.... Any reason for not cleaning up the trans or even throwing some paint on the block? With the heat coloring and old age it just doesn't do justice. And with how clean the car will be why not spend the extra hour to paint it?

Puts k motors together like it's nothing lol

bad ass

Love these videos. Zone out

i got a question, i hope someone could help with it, i got a k24, i put the clutch kit, new oem pilot bearing, all that stuff, my transmission dont want to bolt in, i have try now for 2 days and 3 different people, pretty sure my clutch is aligns correctly, i think my pilot bearing might be “too tight”? i did test fit on my input shaft on my transmission before i put in on my k24 block, how can i make it bolt it smoothly like the video??

Dope a$$ song in the beginning

Is that the same sludgy motor all cleaned up ?? Or did you get a new long block

Best part was seeing you use grease on those and not oil.

stock flywheel ?

Bro I hope you don’t get copyright again.

Fuck yeah 😁👌👌

watching your own tutorial XD

Hey young static, I see you have some 2006-2011 honda Civic si camber arms for the rear the gold skunk 2 ones correct? Get with me man if you want to sell them I could really use them on my car thanks boss

Static taking the motor to task. Great car porn🎉

#ALLTHESTATIC

😜👍🇦🇺

"Progress"

silence for all the haters

1

Talking from experience cloyes timing components are trash. I return most kits that I sell later after the car jumps time

one day I am going to buy you a Hair Trimmer so you can get even hair length on your face so it does not look a load of dirty armpit hairs

ay my boi how many times have you done this lmaooo

Where is ya girlfriend when you needed…