Purchased this saw today (great product at its price point), and quickly realized that the included instructions left much to be desired. Thankfully, I found this, and easily got it assembled and put to work. Thank you Jason, very helpful and well done.
@Mote782 жыл бұрын
Yep, just assembled one today. The instructions provided were indeed poor. It is simple process but Dewalt could easily improve on them . The name on the bag should match what it’s called in instructions. Duh.
@rickbraden42722 жыл бұрын
Manual & tiny pictures worth 5 cents at most.
@bradjaffke4353 Жыл бұрын
I third or fourth this comment. Instructions were garbage. This video was perfect. Thank you
@natew48 Жыл бұрын
I've been looking at this saw for some time now and I think I'm gonna take the plunge and buy it. This video was the most helpful one I've seen to help decide my purchase.
@Zuddybuddy11 ай бұрын
Get ready to have to adjust everything if mine's anything to go by!! 😳
@nancyosborne-webb646 Жыл бұрын
Great tool which will not disappoint. A little on the pricey side but the convenience factor is really nice.Update: 11/3/18 - Still works great kzfaq.infoUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe and not disappointed at with the purchase. Wish I could have bought this at the lower price but ah well. This miter saw is truly awesome after two years of use. Makes cutting quick without messing around. I leant this tool to a friend for trim work at his home. He returned after using my saw and bought one for himself. I guess his demo with my saw was the deciding factor
@dangrimes5078Ай бұрын
My God the saw is just over $300. Would free be cheap enough for you?
@welcomecadc Жыл бұрын
it should say on the box to throw away the instructions and go to this youtube video for assembly. Thank you Jason , you saved me from saying a lot of cuss words
@user-ru1wp4bt9q2 ай бұрын
I just got this saw; this was by far the most comprehensive overview I've seen! Thank you for showing all the little secret storage spots and tips for assembling the stand where the directions fell short. I have all the confidence I need to set this up.
@joegummo893311 ай бұрын
Thank you, thank you!! I've had my saw now for about 4 months and decided to buy it after watching your video. It was so detailed that I watched it as I unboxed and setup the saw. Dewalt owes you a commission for my purchase of their product! ;) Thanks again.
@muehlenweg3 жыл бұрын
Just bought one of these and this saved me a ton of time putting it together! I’m a bit of a novice still so the little additional explanations were massively helpful. Thank you so much for taking the time to make this!
@andreysergeevich29453 жыл бұрын
I’m a Russian general contractor in Oregon and it was hard to understand the instructions but with your video it was super easy. Thank you very much
@Handyverse3 жыл бұрын
Thanks! I'm glad it was helpful 👍
@km726902 жыл бұрын
I’m American and I still didn’t understand them. Definitely a flaw by dewalt.
@Mirrikat2 жыл бұрын
Thank you so much! The instructions left me scratching my head. The pictures are only portions of the “big picture” and it’s a bit challenging to get oriented. I thought “I wonder if someone has made an assembly video” and sure enough here you are. Saved me a bit of time for sure.
@user-nd3ge6kj3e Жыл бұрын
I assembled the frame last night and this morning i attached the saw and had it vertical and was unsure on how to get it horizontal. So I went up stairs and got on line and found this you tube video. I skipped over to where I was and saw you flip it to horizontal then just watched the remainder of your video and it jumped me over any uncertainties. Great Job! Thank you.
@mikegrier2829 Жыл бұрын
Like others, I found this video to be extremely helpful. Just bought my Dewalt today, 4/26/2023, and this saved me a bunch of time and removed a bunch of doubt as to how to proceed. Haven’t turned it on, yet, but it’s assembled and calibrated. Table was dead flat as best I could tell, btw. No issues.
@Handyverse Жыл бұрын
Enjoy the saw! I've been using mine a ton and I still think it's great.
@kkelley87722 жыл бұрын
Jason Thank you for this great tutorial on how to assemble the DW7491. My first time owning a table saw and I am a very young 76 year old retiree. I took my computer out to the garage and assembled the saw as I watched your step by step instruction. The assembly manual is still in the bag. Great job in explaining all the steps. My first order to build is from my wife who wants me to build a corn hole game before all our kids and grand kids come home for the 4th of July. Thanks again. Ken
@Handyverse2 жыл бұрын
Thanks for the kind words! It's a great saw. Enjoy and good luck making the game!
@galvanizedgnome Жыл бұрын
If I was 76 I'd be out there chasing blondes
@warrencorman77759 күн бұрын
Fan freaking tastic. You saved me oodles of time. Thank you so much for your time on this!
@cg44283 жыл бұрын
THANK YOU. I have a huge deal of trouble with anxiety regarding assembly - visually following your procedures made things much, much easier.
@Tamerax2 жыл бұрын
I couldn't figure out the whole thing with the washers for the wheels being on the screws already and I am glad I found this video to actually answer the question about it they are the correct ones
@joshc4136 Жыл бұрын
Thanks for the video. Bought this saw last night and am getting ready to assemble it this morning. Figured I’d watch a video on assembly while drinking my coffee. This video was a great option! Thanks!
@mr.p9882 Жыл бұрын
Nice video. I just bought the second one of these saws and I love them. Neither had any problem with table top flatness. I just assembled and claibrated my second one today, and it is so perfect. Only adjustment it needed was a little on the fence, squaring it to the blade and miter slot. Just a few thousandths out. But now it is all ready to go, did a test cut and it was perfectly square and parallel all the way down the length. You just cannot go wrong with these saws! My old one got sold because I thought I needed a larger saw. Didn't after all!!! So after a year and half, I sold the big saw and got another one of these Dewalts. You just cannot go wrong with them.
@stadenart3 жыл бұрын
So glad I found your video last night. I bought the saw today and followed your presentation step by step. You made putting the saw together a breeze. Much nicer to follow your instructions than to read the manual. Thanks for taking the time!
@smattt2 жыл бұрын
I upgraded to this saw from a rinkydink, Craigslist Craftsman which constantly had me in fear of losing a limb or rib. This saw blew me away with its power and the ease with which I could rip lumber. The reason I went with this saw was the rack and pinion fence, however it is because of the fence I received that this set is going back. The two known issues with no real fixes for the fence are related to aligning it perpendicular to the table. If the fence is leaning away from the blade, the workaround I've seen is adding a shim to the back of the fence. Now if the fence is leaning towards the blade, like the one I received, you're out of luck. I looked everywhere for a solution but found none and decided to exchange this for another set which, I'm hoping, has no issues. Thanks for taking the time to put this amazing video together. It helped me set up and even better, helped me figure out how everything went back in the box!
@Handyverse2 жыл бұрын
Hopefully your replacement was good!
@murielemerson3619 Жыл бұрын
New to having a table saw. Opened it up & the directions for putting it together had a lot to be desired especially since one of the Bags of hardware was torn open and I had loose pieces all over. This really helped also with you showing all the wonderful features this saw has. Thanks a bunch
@richardevans7351 Жыл бұрын
I have had mine now for about eigth months and no complaints. What a brilliantly designed qualiy tool.
@johncarranza7727 Жыл бұрын
Thanks for your help, I'm glad I was able to put it together, this is my first time using this table saw.
@short66913 жыл бұрын
I own this saw and you did a great job of describing the features. I loaned my saw to a friend. He did not realize the fence locked and disassembled the fence guides to figure out why it was so sticky! Oops! Should have had him watch your video! All went back together so no harm done. The dust collection with just the lower large port connected to a dust collector/vac is excellent and even better when both lower and upper ports are used. A very nice saw indeed!
@daperpenny Жыл бұрын
You did an excellent job! Even this 72 year old granny could follow and assemble! Thx!!
@jasonnorth7898Ай бұрын
Thanks for this video--those instructions that came with the stand are inscrutable.
@christinedelea7044 Жыл бұрын
Thank you. We couldn’t have assembled this without your video.
@sammas744010 ай бұрын
I just ordered one this evening. I'll be referring back to your video, when I receive it, for the "put together" instructions. Thanks!
@johnw4590 Жыл бұрын
A+ video! Read the reviews and bought the saw. I intentionally left the assembly instructions in the box and assembled the saw stand and mounted the saw in a half hour. This saw exceeded my expectations and I didn't use a caliper or micrometer to measure the radial runout or deck flatness.. im not building a spaceship or piano with this saw. I bought this saw to install an elevator in my outhouse and build homes in general.😊.
@wessperry19063 ай бұрын
Lifesaver! The instructions didn’t even come close! Thank you!
@bradsun74293 жыл бұрын
Thank you for publishing your video. I followed your video and was able to assembly my new table saw within an hour's time.
@adilshaikh57143 жыл бұрын
Thank you for this excellent presentation. Made assembly so easy. Appreciate it!
@Handyverse3 жыл бұрын
Glad it was helpful!
@VitalityMassage Жыл бұрын
This is a pretty good video. Your audio with the music is excellently raised up and down at appropriate times. Seems the material required is well covered. Thanks. Put LIGHT behind the squares so you can SEE better.
@LS1QUINCY6 ай бұрын
Purchased the saw yesterday Feb 28 2024 found this after I put it together very good information will follow along for more for information
@saldroubi4 ай бұрын
Thank you. Excellent video. Didn’t event use the manual to assemble it. Your Video is much better.
@larryweg Жыл бұрын
Thanks for the setup demo. You sold a saw !!
@1toymaniac2 жыл бұрын
I received this saw today. I purchased it on Amazon for $529.00 plus free delivery for Prime members. I’m so glad I had watched your video before putting it together. You did a great job explaining the process. I didn’t even need to use the instructions! Using my own couple of tools made it quite a bit easier. Excited to make my first project with it. Thanks for taking the time to post this.
@LanceMcGrew2 жыл бұрын
Did yours come packed like the video - with saw in styrofoam? Bought one from Lowes today and it was not packaged this way.
@chevyspeed63682 жыл бұрын
Went on sale today for $489
@LanceMcGrew2 жыл бұрын
@@chevyspeed6368 Returned to Lowes with Amazon page and they gave me $43 and change credit. Thank you for taking time to reply.
@Handyverse2 жыл бұрын
That's awesome! Always nice to save some money. Enjoy the saw! I'm still super happy with it a couple of years later!
@1toymaniac2 жыл бұрын
@@chevyspeed6368 where?
@asiwiak Жыл бұрын
Quick note :) If the plate still wobbles use the four little blacke adjustment screws. This is what they are for. To adjust the insert perfectly to the table ;)
@outdoorfrenzy Жыл бұрын
This is what I came to say. It didn’t wobble before he adjusted the screws.
@gborden60602 жыл бұрын
This guy should get paid by Dewalt!! Awesome video THANK YOU
@jjadaddy2 жыл бұрын
Many thanks. The only part of the directions I couldn't decipher, was where the mechanism was to release the riving knife.
@johnlydick91732 жыл бұрын
Just received my Dewalt DWE7491 table saw. Your video was very helpful. My first impression is; my projects will be cut and assembled much more precisely. The saw is engineered so well. Very user friendly.
@love2travel6092 жыл бұрын
Assembled my DeWalt today and using your video made it a breeze. Huge thank you!!
@erwinerwin12452 жыл бұрын
This is a text book perfect video. It is an example of how a review should be done. I have a table saw on back order and its a King Canada. Have not got it yet. However I am checking out videos on all types. One must for me is one with a stand on wheels. In my mind I envisioned assembling the stand and then how am I a 76 year old weakling going to lift a 70 lb table saw on top of the stand. However from this video one builds the stand and then attaches the stand to the table saw still on the ground and then easily with stand lift it up. What a great idea.
@maurell-webb8202 жыл бұрын
Man! Just finished putting the stand together. Hefty, hefty, hefty! Thanks again for your video!
@Handyverse2 жыл бұрын
Glad it helped!
@charlesesteves49712 жыл бұрын
Manual was not very clear. I’m glad I found this video and saved a lot of time and made the assembly more convenient
@maurell-webb8202 жыл бұрын
I’m literally putting my saw together watching your video. It may seem strange but the flat side of the wheel hub appears to go to the inside. It fits the tube perfectly. Virtually no wobble happens with it assembled this way. Thank you for doing the video. You’re right the manual is bad. 😆
@Handyverse2 жыл бұрын
Thanks for the info! If I have time some day I might pop my wheel off and check this out.
@januismer2 жыл бұрын
Thank you, thank you, thank you! You guidance is so much better than the manual and includes items the manual doesn't even talk about. Cheers!
@khonable Жыл бұрын
This video was very helpful since I hate reading the manuals, thanks!
@richwillard2 жыл бұрын
Great video. Worked me through the process successfully, thank you. One tip I'd offer. The push button to activate the blade, instead of suggesting a place for a padlock over that switch, it is meant to store the allen wrench supplied with the saw, it fits perfectly!
@1toymaniac2 жыл бұрын
Brilliant Rich! I was wondering where to store the Allen wrench. Now just have to find a place for the open end wrench! :)
@Yggdrasil429 ай бұрын
@@1toymaniacyou mean like the video shows at 20:35?
@Three_Eyed_Willy3 жыл бұрын
I've had one of these for six years. For five of those six years, it was very accurate. But evidently something fell on it while it was folded, and now the whole thing needs to be realigned. This gave me some insight into how it goes together.
@Handyverse3 жыл бұрын
Good luck getting it realigned. It's a great saw
@Three_Eyed_Willy3 жыл бұрын
@@Handyverse I may have a damaged part or two. The rack gear seems to jump the track from time to time.
@penelopeproject41942 жыл бұрын
Just got this saw for Christmas and we've already put together. Watching this showed me a few tips and tricks that I hadn't seen yet!! Thanks!
@mikeb3401 Жыл бұрын
Thank you hero! Made my life so much easier putting this together
@brandonvogel9079 Жыл бұрын
Great video! There are adjustable stops at 90 and 45 that are really easy to use. If your top isn’t perfectly flat I would 90 on the right side of the blade versus the left as this is where your material will typically be. Obviously better if it’s perfect but it is a job site saw.
@platinumtoast992 жыл бұрын
This is a life saver. Thank you for saving me countless time assembling the table saw.
@LukePeters3 жыл бұрын
This was a super helpful video! I followed along setting my saw up and didn't have to open the manual 😄 Very nice presentation. Thank you!
@Handyverse3 жыл бұрын
Thanks! Glad to hear it was helpful
@mswhizz56 Жыл бұрын
Thank you so much for this video! I do all kinds of crafty projects and wanted a small table saw to cut down wood for signs etc. and to fit in my Glowforge. I picked out something smaller but my husband upgraded me to this one. He put the stand on it for me but that’s all so I was able to learn a lot from following your video. Now it’s all ready for my first project and I can’t thank you enough!
@DRob7932 жыл бұрын
Just picked up the saw today and the instructions were not the best or easiest to see. Found your video which helped tremendously. Thank you!
@dustindircks6647 Жыл бұрын
Just bought one myself today. Thanks to your video set up will be a breeze!
@richardevans73512 жыл бұрын
The latest (2022) tables are slightly different (with oval silver legs). They are already assembled and all that is necessary is to clip the cross rails on. Make sure that the arrows on the cross rails point point forward and the left hand one engages with two metal clips which prevent the cross rails from moving when the until is tipped up for moving about. I put penny washers and spring washers on the bolts to spread the load and prevent the supplied washers sinking into the slots. Leave the rubber feet on the saw unit because there is a central hole to accommodate them. You will find you will have four nuts left over because they are no longer required because there are tapped bosses for them to fit into and you will need a 13mm socket to tighten them.
@Handyverse2 жыл бұрын
Good to know, thanks for all the info!
@suburbanhomesteadlife274910 ай бұрын
21:00 Use the Allen wrench it came with through the lock! It's the perfect size. It won't be a "lock" per se, but at least an extra step to prevent the lock from getting flipped up
@alexisbruehl51072 жыл бұрын
This was helpful & made it so much easier than reading the directions. Thank you
@HoangNguyen-mo1rz Жыл бұрын
Just boughf this table saw last week. I found this video is very interesting and helpful that I could not find them in the manual. This video is clear explanation and details. Thank you very much for your video and instructions.....
@charlienaramore16142 жыл бұрын
Haha came for clarity on the washer situation. Did not leave disappointed 😂 thanks so much
@paulliddle8272 Жыл бұрын
Thank you thank you this video was very helpful. I just got the new 7941RS. I was so help thanks Paul
@austinsavage3540 Жыл бұрын
Thank you very much for this video , the directions were iffy, appreciate you!
@cjfcal211 ай бұрын
Thanks brothah - enjoyable vid for a sat. afternoon assembly -
@vivgleeson80572 жыл бұрын
Excellent video! Mine came without instructions, would have been lost without you. Thank you! 💜
@BodybyGym Жыл бұрын
Great video I'll be saving this for when i hope to get one for Christmas!
@thiagodouglaslopesdasivla3535 Жыл бұрын
thanks, your move is very good. help me a lot.
@stringartbykaly Жыл бұрын
Just bought this saw and was able to put it together with my husband. But being my first table saw, have no idea how to use it or how the mechanisms work. This video was PERFECT and basically answered all my questions. Thank you!👏🏻
@kevinjaye72672 жыл бұрын
Fantastic slow but not overly slow pace to follow to assemble mine. You saved me 2 hours Subscribed !!!
@gregblackburn4280 Жыл бұрын
Thanks for the video. I like your table in the background also. I've been planning to buy this saw for a few years now, may spring for it soon as I have to build a set of stairs for a friend and I could use a portable table saw.
@tshaunscales5252 жыл бұрын
Thanks for the help on putting this together.
@56studebaker7 ай бұрын
I bought this saw and as noted by your commentary and comments stating the instructions are not very clear or diagrams easily recognized due to poor print quality. Another video I watched pointed out that everything on this saw is adjustable including that wobbly blade cover using a Phillip’s screw driver, pretty sweet.
@cliffloy Жыл бұрын
I just got my saw yesterday and your video will sure help me put it together and how to check for adjustments. Thanks!
@scottdezieck70562 жыл бұрын
Watched this video before I bought the saw a few weeks ago and today I bought it and like you said the instructions were not that great. I watched your video again since I had the 2 little screws left over and was wondering where they went haha they were for joining the two half's of the stand together (watching you do it found that out ...thank you) and saved me time going through the owners manual for how to store the wrenches and rifing knife. Great video, you did a nice job explaining everything.
@greenbuoy402 жыл бұрын
Thank you for this video. I didn’t even have to open the instructions! Walked me through it so easy as I’m a visual learner
@johnrobinson11402 жыл бұрын
I unboxed and assembled this jobsite table saw this morning. instructions are vague, but it's not too difficult.
@garycrumrine95382 жыл бұрын
I tried to purchase this saw almost 2 years ago, and unfortunately, COVID Shut down production, and all the box stores were out before Christmas. Fast foward to A week before Black Friday 2021, and Lowes has them on the endcap, so I grabbed one while I was calling my wife for permission. Salesman indicated they started out on Friday with 6, there were 3 left, and he assured me they would be gone by the weeked, two weeks prior to Black Friday. So I am happy I got MINE. I'll wait until Christmas to open it, along with a top of the line 12 inch Sliding Miter saw. Dewalt of course. Two tools I have been waiting for, dreaming about, and drooling over. Covid be damned, I got them both, on sale, and including my Military Discount, I saved enough to get a few other things. That will teach my wife to go to Florida without me. Also, get a tripod. One handed is difficult at best.
@janek5710 ай бұрын
Great video, used it to assembly my saw. Thanks a lot.
@billst41812 жыл бұрын
Jason, I am so grateful for your video instructions. I just bought the saw and without your your video assembly, it would have taken me forever to get this great saw put together. Bill.
@thomaswaller34293 жыл бұрын
This video helped me put mine together. Dewalt instructions were pretty vague. Overall pretty satisfied with the purchase. Thanks for the help!
@earthling53372 жыл бұрын
Man, I'm so glad I found this. You were incredibly thorough and taught me a few things about getting this or any table saw set up correctly. Fantastic, informative, thorough, and very clear. Thanks!
@adamhaney9447 Жыл бұрын
Thank you very much for this video. I've has time on sliding miter saws, but am a novice at setting up a table saw.
@gingermadore23288 ай бұрын
Great video. This really helped me figure out the assembly. Thank you!
@gottiboi24502 жыл бұрын
This video was so much help, thank you Jason!
@selfsameday74482 жыл бұрын
Detail and relaxng way to get to know about this machine ! Thanks !
@jadams600042 жыл бұрын
Great video, I pretty much followed right along and didn't even open the manual! A lot of manual leave part of the assembly up to interpretation, sometimes forcing you to try something one way, only to have to take it apart and flip a part over several steps later, when things don't line up correctly. This video saved me a ton of time. Thanks!!
@SkratchyMoto3 жыл бұрын
Excellent video. You just saved me at least an hour of trying to figure everything out. Thank you.
@love1nallgivespower9232 жыл бұрын
Omg this is one of the best instructional video ever made. Thanks so much!!!
@DavisHistory Жыл бұрын
Thanks for the video. It allowed me to assemble my new saw and not have to figure out the confusing manual.
@Madvillian083 жыл бұрын
Very helpful thank you! The instructions in the book were terrible. After watching your video set up took about 10 minutes. Good point on making sure the tabletop is level, mine was warped and they are sending me a new one. Thanks again!
@Handyverse3 жыл бұрын
Glad it was helpful!
@DankUrbanBossАй бұрын
Yeah, it’s funny. All the things you ran into. I did as well as weird that they pre-assembled that one washer and bolt.
@jmwadding11 ай бұрын
USA slowly going metric. I loved the way the 1/2 inch changed to 13mm metric 😄
@hmhbanjo3 жыл бұрын
Great video. Everyone should watch this before assembly of their saw.
@genemccarthy2847 Жыл бұрын
Thank you Thank you Thank you! Without your video, I would still be reading the instructions....
@avih73113 жыл бұрын
very useful - I couldn't figure out how to assemble the safety guard - now it is clear!
@louisrodriguez4550 Жыл бұрын
I purchased this today. Thank you for this video.
@lambo25 Жыл бұрын
very helpful video that saved me a ton of time putting it together also..
@MaxSmell2103 жыл бұрын
Just got mine today. Watching this video warmed me up to my new tool!🤙
@Muzzi.2 жыл бұрын
I was having trouble putting my table saw together and this video helped navigate me through it. Thank you so much 😊
@wearytraveler35242 жыл бұрын
Just bought this saw based on some youtube comparison videos! You did an excellent job of showing the 'how to" on this saw! Now I know where everything goes! Thanx and good job!