Assembly Durafly Excalibur V2 - March 2024
Рет қаралды 305
3 ай бұрынWeather poor, I decided to assemble the Durafly Excalibur V2, I wish I could say it went together without any issues but it didn't, However I have managed to edit the video to cover all the Assembly points.
@ed571 16 күн бұрын
Hi, Thanks for the vid! Another tail comment. Look closely at the diagrams under Aircraft Types V-Tail A and B. Type A shows the horns and control rods underneath the tail, and Type B on top of the tail. I’m looking forward to a “flight” vid.
@ironmover5800 3 ай бұрын
Looks like a bit of pain to assemble, good catch on the wing spare
@FlankerTanker 3 ай бұрын
Hi Ironmover - I always check the wing spars - a lot of people will say it is not important, but it is just nice to know its not going to fold on you because the Manufacturer was cutting spars short .LOL... - the tail was a bit fiddly, but apart form that not too bad.. - Cheers Martyn
@CamTheNomad 2 ай бұрын
You may want to switch the orientation of the v tail connecting rod at the servo connector. I found have the metal rod going through the top and the plastic lacking connector on the under side relieved the motion of the servo a good bit.
@FlankerTanker Ай бұрын
thanks for this tip - I will take a look before I get it schedule for a maiden.. thanks
@airhammer6203 3 ай бұрын
Hello Martyn!!! 😎😁
@FlankerTanker 3 ай бұрын
Morning! - Martyn Out !
Mikey Gs RC
Рет қаралды 2,3 М.
Svperdone
Рет қаралды 19 МЛН
ФИЛЬМЫИТОЧКА
Рет қаралды 2,6 МЛН