Assembly of my top suspension strut bar. Alfa Romeo 156, 147 and Alfa GT

Рет қаралды 1,446

2 жыл бұрын

Hello guys. The anti-approach bars do exactly what their name says, they limit or prevent the approach of the suspension towers. There is a cons that is very important... in the case of a side collision, all the shock received will be transferred to the other side of the car. It can make repair difficult, impossible or not feasible.
With these cars as old as they are, I think this is no longer a concern, the commercial value is far below any collision repair.
Still on the bars, once I have part numbers I'll add them here in the description of this video.
PayPal link to help my channel:
www.paypal.me/alfaromeonoproblem
Patreon link to help my channel:
/ alfaromeonoproblem
Alfa Romeo dealships, the good and the bad:
• Do you feel abandoned ...
Living 15 years with a Alfa Romeo 156, good or bad:
• 15 years report, livin...
Complete tutorial on rear suspention on all Alfas 156, 147 and Alfa GT:
• Complete tutorial, rea...
Ac Sytems, faults, solutions and tips:
• Stop charging the A/C ...
Cooling systems, failure and maintenance:
• Is the temperature gau...
Ligth bulbs and ilumination:
• Light fault system on,...
Everyting suspention:
• Broken alfa 75 suspens...
Clutch engagement, DMFs, master and slave cylinders:
• How to remove and re-u...
Brakes, solutions and problems:
• Big brakes!? Do you re...
Power problems and solutions:
• Mjet Injectors, how to...
DPF and FAP problems and solutions:
• DPF and FAP, do you re...
Project Alfa 75\Milano:
• Alfa Romeo 75, project...
Alfa 33 1,7 16v complete restoration:
• Alfa Romeo 33 1.7 16v ...
Tutorial videos:
• How does a starter mot...
Quick tips:
• Quick tips! Car don't ...
Electrical issues:
• How to test your fans?...
Mjet\jtd engines, hard start or no start:
• It's worse! But why? ...
Vlog videos:
• My Alfa Romeo 155 pres...
Autel Diagnosis Machine:
• How to SOLVE airbag li...
Contact me:
alfaromeonoproblem@gmail.com
Where i do my reaserch of parts: wwww.eper.fiatforum.com
Where i buy OEM parts in PORTUGAL:
JRParts www.jrparts.pt/
Rua Dionísio Rodrigues 70, 2415-801 Leiria PORTUGAL
(+351)244820770 lojaonline@jrparts.pt
Where i buy all ORIGINAL parts in PORTUGAL:
LizItalia www.lizitalia-fcadealer.pt/co... (+351)244 871 520
Rua Dr, R. Virgílio Vieira da Cunha, 2401-903 Leiria PORTUGAL
Parts e-mail: vitorjoao.lizitalia@lizauto.pt
One of the Original Part Number for the strut bar:
5901392
Alfista salutations!
#AlfaRomeo #alfa156 #AlfaRomeoNoProblem

Пікірлер: 22

@zoranm2433 2 жыл бұрын

I have never seen that winter engine cover for 156,it's beautiful!!

@alfaromeonoproblem 2 жыл бұрын

Hello, it was love at first time for me too! Bought them new and original a few years ago. No longer available though...

@djlosmi 2 жыл бұрын

@@alfaromeonoproblem Really does look good! I would love to get one for GT with the same engine. 🤩

@itsalwaysfake 2 жыл бұрын

@@alfaromeonoproblem Another beautiful video! Maybe you can you help me. I'm looking for the rotation angle for the rear wheel hub. I only found 330 Nm torque in "eLearn". But I don't have a torque spanner with 330 Nm. Only up to 220 Nm. Do you know the angle+torque?

@alfaromeonoproblem 2 жыл бұрын

They do not exist that I am aware of. Maybe something aftermarket

@alfaromeonoproblem 2 жыл бұрын

Hello. I can check out tomorrow at Autodata. But if it says only torque I do not how to "convert"it to torque+angle

@uranusneptun5239 2 жыл бұрын

Very interessting!

@alfaromeonoproblem 2 жыл бұрын

Thank you very much

@ianadams5533 3 ай бұрын

Very nice 👌. I’ve a question for you. Do you know how to remove the top stabilizer bar bush? It seems it’s pressed into the engine. Any ideas would be appreciated. The engine is 2.0 JTS in a 2007 Alfa GT selespeed

@alfaromeonoproblem 3 ай бұрын

Hello. You have to have a special puller to do it in place.

@milosmilosavljevic8128 2 жыл бұрын

Hello, please advice.. i need to replace the Recirculation flap actuator motor on alfa 147 two zone auto clime.. tell me please does it need to take out all dash board out -remove all instrument panel to change Recirculation flap actuator? Thank you

@alfaromeonoproblem 2 жыл бұрын

Hello. It is possible to do it taking out the glove box unit. You will find much more specs that way. Even if it was necessity to take out the dash it's one of the most easiest cars to do it. Take your time and check things twice and use a lot of illumination

@milosmilosavljevic8128 2 жыл бұрын

@@alfaromeonoproblem ok, thank you very much

@Strike86 2 жыл бұрын

Have you noticed any difference with the strut bar? I want to fit one to my GT but I wasn't sure it would make much difference. Love the colour btw - having it colour-matched to the car body is a great idea.

@alfaromeonoproblem 2 жыл бұрын

Hello. Is more psychological that anything, but I did not did any track days with it. I can feel something but not crucial

@Strike86 2 жыл бұрын

@@alfaromeonoproblem Interesting, thank you!