Live FX - Nvidia Quadro Sync Setup, Projection Mapping, Image-based Lighting
Рет қаралды 1,329
Жыл бұрынLearn how to configure the connection between GPU and LED processor, along with a quick introduction to projection mapping and image-based lighting!
@mouneerhadaya8853 5 ай бұрын
nice setup, thanks for the video, could please elaborate more on video processors gen lock? Thank you
@serhancoskun921 2 ай бұрын
So, is there an nvidia quadro sync card installed here or did you do this without a card?
@quentinfabrie1563 9 ай бұрын
thx for this vid
@josejoselete6156 6 ай бұрын
thanks for the video. how are you sending the video out to the tesserra input? SDI out from the AJA card? i think you mentioned that is coming out of the graphics card, if so are you converting DP to HDMI?
3 ай бұрын
Actually Aja is using for live feed such as camera sdi. In this pipeline - as i understand, he is using one Quadro a6000's 2 Display Port outs each with custom resolution (btw Brompton Tessera processors have no Dp input port, only hdmi and sdi so he has to use DP to HDMI converter or expensive matrix in this case) and combining them via mosaic feature. In most case, you can stream your texture buffer with video capture card like BMD, aja or bluefish but resolution thing is tricky. unless you have installed custom driver, yo won't able to stream custom resolution via sdi. Only pre-definited 16/9 or PAL/NTSC ratio resolution is supported.I hope it helps.
@josejoselete6156 3 ай бұрын
yeap that helps, thanks for your reply. @
Maxin10sity
Рет қаралды 495 М.
Assimilate SCRATCH
Рет қаралды 1,4 М.
Сериалыч
Рет қаралды 197 М.
Влад Закроев
Рет қаралды 3,5 МЛН
ManyaProds
Рет қаралды 4,1 МЛН