ASUS EeePC 1015PEB laptop netbook take apart video, disassemble, how to open disassembly

Рет қаралды 265,106

12 жыл бұрын

Hi!
No music. No talking. Just work.
If you are taking your ASUS EeePC 1015PEB laptop netbook apart be careful and wear an anti-static wrist band or use other anti-static device. If you need to change a LCD usually you don't have to take screen out of a laptop. You can leave it on a laptop and watch the last part of the video where I am taking LCD apart. If you need to change a keyboard, you don't have to take all bottom screws out. There are usually some marks, like a keyboard picture, on a case bottom. If you need to put a laptop back to work be aware of screws. They are different and you better remember or mark them somehow to insure that you will put them back in to a right place.
Some laptops I take apart first time, so don't be serious on my time and performance.
If something got broken - ooops, it's your fault.
Believe me, some parts in your laptop are already broken, you just don't see that.
So, just watch this video and fix your laptop.
Have fun and good luck!!
regazzz #recycling #recycle #upcycling #zerowaste #sustainability #reuse #environment
#handmade #waste #sustainable #diy #vintage #recycled #demolition #upcycle #design #scrap #repair #disassembly #Technology

Пікірлер: 70

@shmoto 11 жыл бұрын

A giant thank you for posting this! Gave me the confidence to rip the sucker apart and replace a broken fan successfully.

@unit0007 4 жыл бұрын

Seeing you stuggle with getting the trackpad off, made me feel better about myself. =)

@regazzz 10 жыл бұрын

Cool! I am glad this video helped you out!

@to0muchfreetime 12 жыл бұрын

Thanks a lot. This was super helpful.

@botasfinas 11 жыл бұрын

Gracias por este vídeo. Sin él no habría sido capaz de hacerlo

@primoz990 2 жыл бұрын

Thank you. This video saved me a lot time to disassemble this little eee bastard :D

@regazzz 2 жыл бұрын

That's great!

@regazzz 11 жыл бұрын

Thank you very much for such a valuable comment!

@regazzz 11 жыл бұрын

Depends on what type of experience, replacing whole board with USB port on the right side of this model of a laptop.

@blackhupia 11 жыл бұрын

thanx man it helped me a lot. yeah you probably could do it faster but still it's fine. the ONLY ONE video that really helped me (I posses seashell series asus netbook)

@alexajna 10 жыл бұрын

This video is very helpful. Thanks a lot yo!

9 жыл бұрын

Thank you regazzz! Excelent how to!

@regazzz 9 жыл бұрын

Rogério A. Matos You are welcome!

@regazzz 11 жыл бұрын

GREAT!!! You are very welcome!!!

@regazzz 11 жыл бұрын

Good for you! You are welcome!

@regazzz 10 жыл бұрын

Thank you too!

@romabasttos3876 2 жыл бұрын

Thank you! 🙏🏾

@regazzz 10 жыл бұрын

You are very welcome!

@botasfinas 11 жыл бұрын

Thank you for this video. Without him there would have been able to. I changed the hard drive, but I have not put plastic down. Is it necessary to do

@simon5582 2 жыл бұрын

nice! thanks you

@inmorthex 10 жыл бұрын

thanx man!

@regazzz 10 жыл бұрын

I can't tell exactly but it was some husky set with a really thin bits.

@regazzz 11 жыл бұрын

I can't tell where controller is! Have a good luck!

@Wilku3d 9 жыл бұрын

Does anyone know what thickness is the thermopad in this EeePC? Many thanks!

@regazzz 11 жыл бұрын

depends where laptop coming from. Some people have cats who like to sit close or even on top of it. You can try a compressed air, just try to not spin fan very fast, some people was braking it by doing this. But if there is a really good amount of dust inside, compressed air will probably not help. Good luck!

@anilkhnadekar3032 2 жыл бұрын

Thanks dost

@TheVidoegame 10 жыл бұрын

What was the size of the screwdriver used to get out all the screws?

@DE-ey9lb 10 ай бұрын

Thank you! Thank you! Thank you!

@regazzz 10 ай бұрын

You are welcome!

@regazzz 11 жыл бұрын

You are welcome!

@Chicago48 9 жыл бұрын

What are the tools he's using to disassemble?

@hammy434 10 жыл бұрын

hey, you know the black tape you peeled off the hdd at 8:40 in the video. well if you put a new hdd to you have to put that on it? cause i upgraded the hdd on one very similar to yours (mines a 1015px) and whenever i tilted it i heard like a grinding noise. im not sure whether it was the hdd that was broken or something else. the sound was similar to when you put a cd in a laptop and then move it. if i tilted the laptop quickly the hard drive would stop and make a beep sound. thats not normal. but i just want to know is that due to not having the black tape or is it because of a bad hdd. the hdd i added to it was higher rpm (7200rpm) than the previous (5400rpm). thanks.

@regazzz 10 жыл бұрын

Hello, I would say it not a must, but better to do same as original genuine manufacturer. As they do something for a reason.

@regazzz 11 жыл бұрын

(sorry for late comment) I hope you was able to unscrew them. If the screw head get's damaged it can be pain in a butt to remove it. You may buy a screw extruder, smallest possible to try it first. If this will not help, you may use a drill to carefully drill it out. With both tools you need to be very careful, because drill (especially drill bit) can damage plastic pretty bad.

@suyahatesntr 9 ай бұрын

You still alive bro? Just wanna thank you 🙏

@regazzz 9 ай бұрын

@@suyahatesntr all good and alive! Thank you for support! I am glad this video helped!!!

@Gazinbali 10 жыл бұрын

Yeeks !!! If I tried this I would have at least 6 - 8 screws left over.. I was checking to see about the Speaker placement.. as my Eepc was putting out horrible sound.. turns out it had picked up a mini staple.. and was stuck to speaker magnet.. now aok.. no surgery required :)

@ISMELLNOOBCAKE 11 жыл бұрын

i cant get the screws off where the batteries are, tried using the smallest screw driver i got. any suggestions

@JoaquinPro64 3 жыл бұрын

Sorry for really late comment but what type is the cmos battery because i have to change

@regazzz 3 жыл бұрын

No problem, I would suggest to simply get on eBay and search there for something like "asus 1015peb cmos battery" That would give you the best results. Thank you!

@QuestionableStain 10 жыл бұрын

Mmk I followed every step changed the hard drive and put it back together. Now it won't turn on. I know it isn't the hard drive's fault seeing a couple of vids how to change it . Any suggestions or any ideas?

@regazzz 10 жыл бұрын

Can't turn on - look at the power button first. If it is not connected - can be a reason.

@pst9821 7 ай бұрын

I got a ssd, any advice on how to put it inside it and move my os and data onto it in a little time

@regazzz 7 ай бұрын

I would recommend a fresh windows 10 install rather than clone, Make sure you have your license for win 10. After install, plug in your old hdd externally via USB and and adapter and copy your files.Watch a few videos on KZfaq. Hope it helps!

@iguana563 Жыл бұрын

What kind of band you wore,is it for static proof?

@regazzz Жыл бұрын

Nah, I would not rely on it. The best would be one that is plugged into ground. Otherwise it makes no sense.

@regazzz 11 жыл бұрын

and I like your channel name :)))))))))

@drozdovnik 11 жыл бұрын

Спасибо, помогло разобрать

@PaoloDiNocera 9 жыл бұрын

how many inch is Hdd? connector?

@stephanlindauer 10 жыл бұрын

foreign keyboard might have more screws underneath the touchpad. try removing that first if keyboard seems hard to loosen.

@stephanlindauer 10 жыл бұрын

foreign in my case is a german keyboard layout...

@regazzz 10 жыл бұрын

Thanks for let people know! It will be useful. (I can also imagine that there was no screw at the start in a laptop I took apart.)

@davidmattock229 9 жыл бұрын

I'm not being funny but this guy doesn't look like he 'knows' how to disassemble the unit he is just feeling his way through, I could do that if I too guessed each stage. This is not what I was hoping for

@regazzz 9 жыл бұрын

David Mattock Yes, you are right. Some times I take laptops apart for the first time. But still, many people likes my videos :) I hope it was at least a bit helpful for you.Anyway, thanks for watching!

@regazzz 11 жыл бұрын

It is should be fine...

@regazzz 11 жыл бұрын

I guess it has only one access. Removing a palmrest.

@jenshpark9896 6 жыл бұрын

Battery's Name ??

@SophieMackey-ls4mh 9 ай бұрын

Can anyone tell me if this model uses the 2.5mm/0.7mm or 2.3mm/0.7mm power source? Thank you.

@regazzz 9 ай бұрын

Can't say exactly, but if you are talking regarding a charger and it's plug, I would suggest to search for used chargers on eBay to find a correct charger

@regazzz 11 жыл бұрын

I didn't tell that there is no value. I am fine with that. People are different and can have absolutely opposite point of view.

@abitofpc6611 7 жыл бұрын

"If you are taking your ASUS EeePC 1015PEB laptop netbook apart be careful and wear an anti-static wrist band..." Why? You did not. LMAO. An anti-static wrist band does NOTHING if it is not connected to a ground.

@regazzz 7 жыл бұрын

+A Bit of PC isn't that obvious?

@ke6ziu 8 жыл бұрын

I hope, for your sake, you didn't use that drill to put this back together...

@regazzz 8 жыл бұрын

Lately I use my wireless screwdriver only on some external case bottom screws. So, this video was made a few years ago and only one way.

@ke6ziu 8 жыл бұрын

+regazzz Good... I say that, because I've had supervisors that would have a conniption fit if you used that to reassemble a computer. We had a guy that would over torque the mounting screws, and would damage the mobo...

@abdellahbentahir8766 4 ай бұрын

C'est du tâtonnement. Pas professionnel du tout.😢

@regazzz 4 ай бұрын

It was also filmed more than 10 years ago when no videos like that were even available on KZfaq. Usually people forget about it but that's ok. Yes, it is mostly trial and error because I mostly film laptops I take apart for the first time, otherwise, after a few similar laptops you know exactly what to do. Meanwhile, it isn't my main income, so, I can't find 5 same laptops for training to make a perfect video for people who think I am "not professional". I hope this video helped at least partially. Thank you!