Hi LeHim, welcome to my channel and thank you for your valuable feedback, greatly appreciated it and all the best with your build too. 😉

Hi Epic_Joker_Spec gaming, welcome to my channel, I am glad you like this content and congratulations on your new build too.

Hello Mr.Marvellous, welcome to my channel and thank you for the valuable feedback. I am glad you have enjoyed it and all the best in your build.

Hi Nox, welcome back. 😉 You are very right, I do not just want to share basic marketing gimmick but to dive deep what a pc product can offer. That’s my main purpose of this channel. Thanks again for your support 👍

Hello dal doodler, welcome to my channel. Yup, I was very impress with this motherboard and got carried away with so much pros about it. Good things must share hahaha. That’s why it’s so lengthy.

Hi Monarth Patel, welcome to my channel. Don't mentioned it. I am glad this content did aid you and all the best with your build too! Merry Christmas!

Hi ya Gio, welcome to my channel. oops did I break your pocket hahah.. kidding. yup this board has what it takes to power up an i7 or i9 13th Gen processor, just need to watch out for the aggressive power drawn.. tone down, run some benchmarks, play some games for stablilty and you are all good. Once again thank you to have visit my channel and all the very best with your build.

@@KleoYan every question i ever wanted to ask about pairing this motherboard with a 13700k was answered in this video my friend. A sub is the least i can do. 👍👍👍

@@giodegracia I see. hmm hey buddy, there is a trick which might aid you. though it's not intel processor but I did the same application in this test and it does help heaps. kzfaq.info/get/bejne/rsBihZej1KyVj4U.html the method of applying thermal paste without 1) mess 2) good contact 3) easy to clean off.

Hi Mr Wlv, welcome to my channel. Glad to hear that 😉 and thank you for your feedback. All the best with your build too.

@@KleoYan Thanks 🙏

@@Al3xDk you are most welcome 😉

hi Aron los, welcome to my channel and I am glad this content did aid you in certian ways. all the best with your tweaks and thank you to have visited my channel. 😉

Hi TYT, welcome to my channel and thank you for your valuable feedback.

Hi The Glitch Syndicate, welcome to my channel. I am glad you are having good temps. Congrates and thank you to have visit my channel.

Hi Anoshi, welcome to my channel. when you have mentioned to build the strongest. Technology is always revolving, there are no absolute strongest that will last 10 or more years. Most top end system at the moment will be replaced by a better one in 2 to 3 years time. If you are looking for a PC just to last for the next couple of years (max 3 to 4 years) then I will be able to advise you. However what is the main function of your PC? what is it for? Gaming? 3D rendering? Video editing? I need to know these before I can aid you on this. If it's possible, drop me an email godyzlatech@gmail.com Thank you!

Hi Kitchenfreak81, welcome to my channel, I believe there is a new bios update and it might be of a different layout. Still You can give it a try and test it out. If it’s unstable, you can always revert back to default.

Hi Wayne Hughes, welcome back. Thanks for the info. I was not aware of the wifi at Jalan. Ya it’s a minor set back on the m.2 but nevertheless this is a good board.

Hello Stanley, welcome to my channel and all the best with your build 👍

HI Last Second Bloomer, welcome to my channel, you are right about this and right after I have updated the Bios, am not able to do that. Thank you for your feedback.

Hi Penko1HP, welcome to my channel. Do pardon me as I no longer have this board but why do you want to know. This board is cater for 1700 socket and not!1200. As why you see there are outer and inner. This is because you can use the 115X older socket coolers. When purchasing an Aircooler or liquid AIO, just have to make sure it supports 1700 socket. Or if you have an old aircooler or liquid AIO, make sure it supports 115X

Hi Ender KESKIN, welcome to my channel. thank you for your feedback.

@@KleoYan 1341 volt ideal mi kaç olmadı gerekiyor ? Bende sizin gibi 1750 yazmıştım volt

Hi Vampirspiegelei, welcome to my channel and thank you for your valuable feedback. All the best with your build too. 😉

@@KleoYan Hey thanks! I've been watching and reading a lot about 12th and 13th gen intel CPUs lately and the heat issues they have. Since I wanted to run a Dark Rock Slim on the board with a 13600k undervolting is probably a smart thing to do.

@@Vampirspiegelei I see, hmm.. maybe watch this, it might aid you too in have better temperature, kzfaq.info/get/bejne/rsBihZej1KyVj4U.html alot have tested and try it out (not about the MX6, is about how I did thermal paste on a processor) . Even though it's applied on a 7950X, you will still be able to apply on your 13600K.

Hi Can na, welcome to my channel. This board only support PCI-E 3.0 and 4.0 nvme m.2 but your EVO 860 is a Sata M.2. It does not support it.

Hi Tseesium, welcome to my channel. I only set what is shown in this content. I have no idea where to set the microcode 104 which someone have pointed out to me..

Hi No Body, welcome to my channel. You can go with the 13700 without the K. As why am I having the K series as am using a z790 Sonic on my own system.

Hi SanjinX Kalakovic, welcome to my channel. Undervolting is never harmful, you can give it a try but do note that this content is 7 months old, there might be different bios if you got this board recently.

Thx!@@KleoYan

@@XSanjin you are most welcome. good luck with your tweaks too. 😉

Hi Muhammet Aktaş, welcome to my channel. Am glad to of help.

@@KleoYan I sent you an e-mail about a problem I could not solve on my Asus B760-I motherboard. I would be very grateful if you could take care of it.

@@StalwartMan I read, I am at work at the moment. Will reply you once after work.

@@KleoYan Ok, thank you 🙏🏻😊

Hi Isham Trivedi, welcome to my channel. Yes I do get reply from some. Right after bios update. You will need to take care of the microcode 104. I am not able to assist you as I have returned this board. But search for content on microcode 104 which you will need to set.

Hi Ivan Yeong, welcome to my channel. These are my opinion. If you are using it for gaming, not overclocking and use only Gen 4 m.2s. I will get the b760-f. It’s enough to drive as a gaming rig with a i7 13700K. If you intend to overclock and wish to use Gen 5 m.2. I will go for z790-E with a i9 13900k. So it greatly depends what you need. Last but not lease. If you just looking at budget gaming rig to pair with 13600k. Get this board will do as the z790 is overkill. Plus using this b760-F, you will save abit and to invest on good xmp profile rams that runs on cl30 6000

Oh by the way something to share. This might aid you with your build. Is not about the thermal paste. Is about how I apply the paste. As 1) no wastage 2) it does perform 3) easy cleaning. It applies on both amd and intel platform. kzfaq.info/get/bejne/rsBihZej1KyVj4U.html

Thanks buddy. Actually I plan to refresh my current ROG rig Gen 6th haha. It's old bit serve it's purpose until I got my nee LG ultragear 4k monitor to pair with my PS5 + PC. My PC started to show sign of lacking. Haha. So I'm looking to get one that able to support 4k casual gaming + productivity. My current set is using Sata SDD. I think the gen 4 m.2 sdd will make a huge improvement already. My budget is around 3.5k. Initially I plan to go for i7 13700k with Rog Strix Z790-A with RTX 4070 ti. As I watch more and more youtube videos, it makes me wonder if I should get the Z790. So I cannot make up my mind. I checked up the price at Sim Lim, if I were to go for B760. I save about 200 odds. Still not enough to hoot RTX 4080 lol

Hi Tony Dimarco, welcome to my channel and as what I did when installing windows 11, I have my ethernet lan cable connected to this motherboard and I have no test using wi-fi.

Hi Abdi Maqbul, welcome to my channel and it’s my pleasure. All the best with your build too. 😉

@@KleoYan You took the time to make 1 hour of content thats amazing 🤩 b760 f is my first motherboard since i used to build with the thick pci e 3.0 cables. Ive learnt so much from this video. thank you. thiis is the specs and benchmarks from the setup. My first build since 2006. UserBenchmarks: Game 165%, Desk 118%, Work 221% CPU: Intel Core i9-13900F - 118.5% GPU: Nvidia RTX 3060-Ti - 139.2% SSD: Nvme KINGSTON SKC3000D2048G 2TB - 529.9% SSD: Crucial MX500 500GB - 106.4% HDD: Seagate Barracuda 2TB (2016) - 105.4% USB: SanDisk Ultra Fit 124GB - 28.4% RAM: Corsair Vengeance LPX CMK64GX5M2B5200C40 2x31.5GB - 161% MBD: Asus ROG STRIX B760-F GAMING WIFI Specs: CPU: Intel Core i9-13900F 2 GHz 24-Core Processor CPU Cooler: *Noctua NH-D15 82.5 CFM CPU Cooler Motherboard: Asus ROG STRIX B760-F GAMING WIFI ATX LGA1700 Motherboard Memory: Corsair Vengeance 64 GB (2 x 32 GB) DDR5-5200 CL40 Memory Storage: Crucial MX500 500 GB 2.5" Solid State Drive Storage: *Kingston KC3000 2.048 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Drive Storage: Seagate BarraCuda 2 TB 3.5" 7200 RPM Internal Hard Drive Video Card: Gigabyte GAMING OC D6X GeForce RTX 3060 Ti 8 GB Video Card Case: NZXT H500 ATX Mid Tower Case Power Supply: *SeaSonic FOCUS Plus 650 Gold 650 W 80+ Gold Certified Fully Modular ATX Power Supply Operating System: *Microsoft Windows 11 Home OEM - DVD 64-bit. 😄

Hi Аман Игдиров, welcome to my channel. I believe there is a change in BIOS structure. I am not able to aid you as i have returned this board to Asus Singapore. so sorry about it.

Hi ParaNature, welcome to my channel am terrible sorry as I’ve returned this board. Unable to answer your question.

Hi Сергей, welcome to my channel. I have been mounting different types of cooler on this motherboard and yes. they are reliable and when mounting, take a bit of care will do and do not apply too much force.

Hi SetH-, welcome to my channel, the structure of the UEFI on most mid tier Asustek boards are of similar layout. You can give it a try and to do some testing with your motherboard. Just make sure you start off with the Power Limit PL1 and PL2. The default 13700K TDP is at 253watts, try setting the PL1 and PL2 at 220watts and drop slowly. monitor the performance as in the clock speed, till you find the sweet spot on both thermal and clock speed. Next will be offset, some have reflected to me that they are not able to do the offset after they have updated the bios. If thats the case, by setting the power limit will still improves the theramal. All the best with your settings and if possible, let us know your result too. It will be useful for those who are trying to tame this processor with your motherboard.

Thank you so much for your answer. I will follow the steps you showed in the video and share the results here with details :))

@@seth-3794 I wish you success and will be waiting for your results 😉

Hi, I did everything you show in the video. Setting up pl1 and pl2 works fine as expected, but things are a little different for voltage offset. I followed the voltage values on hwinfo and realized that the settings I made somehow automatically revert to stock settings after the system booted. I'll look for a way to solve this and if I find I'll come back here and share the solution =) Another problem is that 220 even 180 watt was still running hot (around 90-95 degrees). I need a better aio cooler and i will get it as soon as possible. Then everything will be fine... Thanks again for your help, I will be waiting for new videos =))@@KleoYan

@@seth-3794 hmm maybe you can do a screenshot of the offset screen in uefi and the drop down menu. Plug a usb thumb drive, when you in UFEI mode, go to the offset page. To do a screenshot of that page. Press F12 and it will save the screenshot to your thumb drive. Send to my email at godzylatech@gmail.com . I see if I can help you out.

Hello Black Cat, welcome to my channel. Are you able to wait for next year Feb? If you able to, hold on to your horse. You can temporary use the integrated GPU if your processor is or non KF version. As the 4070Ti super will be released by next year Jan. I will go for PNY and Zotac as both to me are cheaper and both have better warranty coverage in my country. Infact any of the brands are ok. It greatly depends on your budget and how much cooling the brand can provide.

Hi Shams, welcome to my channel. I am using HWinfo OSD on unigine valley benchmark. as for how to do overlay. you can follow this gentlemen kzfaq.info/get/bejne/eLyHm7tmzNrZlI0.htmlsi=sGNC0HYrqUedTcKx

Hello FG TUTOR, welcome to my channel, to be honest I dont really go in-depth on that. All I know is to try and this. Objective is to sustain at lower temperature and I have done timing while compiling my video edit. the lost between default and this offset is like 8 to 10minutes which I am not in a rush. I rather to run the system cool then to risk it. but would like to learn if you willing to explain. thank you!

@@KleoYan I'm going to give you a tip to do this configuration of yours, go to the tweakers paradise tab and in switch microcode activate 0x400 then you leave the vcore and auto the first option, then change the global core svid and mark the offset - negative and put 0.1000mv or 0.1500mv, same thing you do in the svid cache mark the offset - negative and put 0.1000mv or 0.1500mv !!! you will use all the power of your i7 13700k and it will remain very cold !!!

@@fagner35491 I see, thanks, will try that when I reach home. thank you FG TUTOR, I learn something new today.. 😉

Hi Daniel De Vega, welcome to my channel. Yes you can run xmp with default settings not an issue and your processor will be fine. All is needed it a good liquid or air cooler. All the best with your build too 😉

@@KleoYan Thanks You so much Kleo, god bless You ✨

@@danielvega9185 you are most welcome 👍

Hi LNWLF. STONKS, welcome to my channel. Maybe I should inform everyone how I do windows installation on all types of motherboard, I do not use Wi Fi, instead I use physical RJ45 connection. There are some boards by default, fresh install of windows, they are not able to detect Wi - Fi adaptors.

Hello R Crotez, welcome back. Yes it is completely fine. My question to you is, you will be doing 3D modelling, why not choose AMD? Hmm 🤨

@@KleoYan I keep hearing rumors from amd when running 4 sticks of ram even at recommended mhz speed from the processor its still experiencing black screens, only fine when it comes to 2 sticks. Like the majority of ram mhz overclocking issues I keep hearing them from amd users. Imma be throwing 192gb 4 sticks at my intel chippy boy once the 5090 comes out and straight for those rams after that 😁. Im still not on the rigging level and heavy animation but the gpu is indeed the highlighted device for these 3d works right?

@@rcortez5979 I see. Yup intel does have the advantage. If you are ok with intel then go head 😬 as for 3D rendering and compilation, core count and threads will also be needed, besides the GPU Cuda cores.

Hello Plavan Barua, welcome to my channel. When you swap the motherboard, did you do a clean installation of Windows 11 or did you just use back the OS on your B360f?

@@KleoYan I did a clean install idk why this is happening.

@@plavanbarua7260 ok. how did you install your realtek audio drivers? i am using armoury crate, the drivers update section to download and to install, which is cater for this motherboard.

Bi Billy, welcome to my channel. It greatly depends what you are using it for? if it's for gaming, the EXPO profile comes in handly with higher bus speed at 6000. if you are using it for work and content creation and such, high bus speed does not improve performance with tighter timing, example CL30-36-36-89 @ 5600Mhz will beat a CL36-36-36-96 6000Mhz, so if you are going after gaming, get the 6000Mhz bus speed.

@KleoYan thanks for taking the time to remark on this, I only just noticed it. Another person stated that it is not suggested to utilize Intel Asus ROG Strix B760-F Gaming Wifi with Intel Core i7 13700k LGA1700 because it has a larger possibility of overheating than a z690-f mobo. Is this correct? Any thoughts on this? Thank you for your second comment. I saved this video for future reference because I like your setup with this mobo.

Hi Carlos Monteverde, welcome to my channel. For the first time you will need to 1st install the chipset driver and it should read. But I would also advise you to install the wifi driver too. rog.asus.com/sg/motherboards/rog-strix/rog-strix-b760-f-gaming-wifi-model/helpdesk_download/ This Intel Chipset Driver V10.1.19600.8418 For win10 64bit & win11 64bit and This Intel Wi-Fi Driver V22.160.0.3 for Windows 10 64-bit & Win11 64-bit---(WHQL).

@@KleoYan Thanks a lot for your help! I will do it.

@@carlosmonteverde9301 you are most welcome and all the best with your build too 😉

Hi Hfz. Rog, welcome to my channel. Nope you can't just plug a 14th Gen processor. It does not come with the latest bios, you will need to download the latest bios and this board has a bios flash back function, where you can flash without having a processor or rams. kindly check the instruction manual if you do get this board.

Hi Güven Kaya. welcome to my channel. I am not able to answer you as I do not have a 13700KF. you can give it a try since it's undervolting.

Hi Omar Hachicha, welcome to my channel, it greatly depends on which intel processor you intend to get. If it’s low end to mid range. This will be a very good board if you do not overclock. The only 2 cons which is my own opinion is the default power limit. It’s aggressive and next are the fan headers. Should have them 2a instead of 1a, as these days performance fans uses higher ampere.

Hello Md Atiqur Rahman, welcome to my channel. For production wise, it depends what type of production. Phone editing? Video Editing or 3D Rendering?

Hi arya, welcome to my channel. I will try to answer your questions as follow :- Q1) Do you think with this motherboard, worth to choose 13700 or 13700k? Price difference $26 A1) Based on the application you are using, the 13700 will be able to accomplish most of your task. Infact I will go for a 13700 with a B760 board. Q2) Just to make sure, This motherboard is capable of running 13700k? If i buy this motherboard now and dont update anything, i will get the exact same settings as in this video, right? then i just follow your configuration to limit the power. A2) I have update the bios when I got this loan motherboard from Asustek. If you want full potential on multi-cores, do not apply my settings. The settings set here are based on undervolt usage, performance on work load will drop but not games. I will still recommend you to update the Bios as there are fixes and performance improvement. Q3) If i use 13700 (without k) the max power is 219 W. Should the temperature not go crazy even though i don't limit that package power? A3) If you decided to use the 13700, run at default settings on your motherboard as most of the time you will only be hitting 65watts or lower. even at gaming, it will not peak 219watts always, plus this chip will hover nicely at 80 to 85 degrees. Just make sure you use either a good AirCooler or a Liquid AIO. AirCooler is sufficent. Q4) 32/64 GB RAM? Q5)Ideal ram speed and cl to pair with? (based on 13700k or 13700 spec) is it 5600? just want to run fast and stable without waste anything. Hard to choose between 5600/6000/6400 or even more? A4 & A5) If you are not doing any 3D rendering. 32GB will be sufficient and if you dont fancy any argbs on the ram (Which I dont) I will recommend you to look for these ram stick. I got mine at USD118. Reason for this recommendation, out of the box, when you set to XMP profile, it will run smoothly at 6000Mhz and with tight timings (CL30-36-36-76) pcpartpicker.com/product/QzP8TW/teamgroup-t-create-expert-32-gb-2-x-16-gb-ddr5-6000-cl30-memory-ctcwd532g6000hc30dc01 for work production, the most important factor on rams are the tight timings (CL30-36-36-76) and not the bus frequency. bus frequency (6000Mhz) will only help in games. Hope these help, all the very best with your build.

Hi Worth it? welcome to my channel. most PSU that are ATX or SFX are suitable for this motherboard. The only thing you need to take note is how much current you will need to power up your components.

Hi Anonym, welcome to my channel. If you look closely and to observe at timestamp 05:24, you will see there are two holes which looks like a slot on each side. The inner cut holes are for 1200 and the outer cut holes are for 1700.

Hi skankhunt42, welcome to my channel. You can run all 3 x m.2 and 4 x Sata without bottlenecking. This board supports total of 7 storage connection. Total supports 3 x M.2 slots and 4 x SATA

@KleoYan thank you man! I bought it yesterday and I will try it - especially the tdp cap thing with processor Temps

@@skankhunt__42 ok all the best with your build.

Hi end of game, welcome to my channel. I am glad you like this content and oops 😷.. pardon me to break your pocket.. All the best with your build too😉

​@@KleoYanty hehe tommorow will start build with 13600K and 4070. But this mainboard is really a good one it's heavier from weight then the ordinary B760 models.

@@endofgame6175 nice... if you happened to complete with pics, mind if you can send some pics of your build to my email godzylatech@gmail.com I will love to see your build too 😊

@@KleoYan yup will send you when i am finish with build 😊

@@endofgame6175 that will be great.. thank you.. can't wait to see how's your build 👍

Hi Ya lol L, welcome to my channel. Arctic Liquid Freezer II 280.

@@KleoYan I have roughly the same setup with undervolt. But running at 90c during cinebench. Are you using a 3000rpm fan on the aio?

@@loll8796 nope. Am using the default p14 non argb.

Hi kungalex, welcome to my channel. This board is not able to Overclock which is true but it does support 13900K. you should not be worrying too much.

@@KleoYan thank you for the answer, i saw the whole video! Should i put in the same power limits like you did with the 13700k?

@@kungalex I am afraid the new bios do not allow that.

@@KleoYan ok. I was thinking i could since its the same motherboard. I saw you got better temperatur and stuff shen you did on the 13700k

@@kungalex you should be able to but need to fiddle with the new bios. They key to undervolt is to use vcore offset and to set power limits on PL 1 and PL 2. Which base on my experiences. Max PL or power limit or a 13700k is at 253watts. But I find out that you can run it at 208watts to obtain the same or even better performance. In addition to this, it will lower down your temps. I am not too sure how much this board cost at your country and you might want to check out ASRock Z790 Riptide Wifi. That is a good board too and it’s a refresh board for intel gen 14th but can use on gen 13th too.

Hi tyler 78, welcome to my channel. as this was 10 months ago, I am not sure if you did any bios update as the current bios are not able to do undervolting and the following are grey out. You still can give it a try, 1st is to do offset of your vcore to -0.05v, make sure is negative on offset mode sign (Timestamp 30:15) , 2nd hit down to the PL and PL2 settings (timestamp 29:17) , set both Long duration package power limit and the short duration package power limit to 253w which is your 14700K default wattage. This way you wont lost performance and your temperature will drop as your system will only pull what is needed on your Vcore, you should be seeing in hwinfo, the VID will be at 1.12volts sto 1.28 volts, instead of 1.35v to 1.38v

@@KleoYan thank you for your message. Ive got the next we off so im surely give your advices a try. However, ill let you know, lets keep in contact. Thanks again

@@tyler7873 you are most welcome. Please note that I no longer have this motherboard as I’ve returned to Asus SG, I will just try to aid you as what I can recall. Thanks.

Hello my friend, tryed to offset 0.05 and set pl 1 and 2 to 253. Temps on stress still in the 90s and throttling as before unfortunately. Cb23 score still Into the 31ks wich is not bad but id like not to throttle

@@tyler7873 welcome back, is the offset negative 0.05? and as for your PL1 and PL2, mine does better temp when set to 253watts on both. I believe it greatly depends on the cooling you are provided to your processor and you might want to try to lower dont your PL1 and PL2, lets say 248watts

Hi Dipak Taylor, welcome to my channel, if you are having crashes. Your offset vcore should tune it up. Here is was set to -0.175, you might want to try -0.150, if it’s still crash then bring it down further -0.125 and such.

Rog bios Default core voltage 1.447v safe on i7 13700k cpu ?

@@dipakthakor9455 hi, the processor default is at 1.45volts which is the operating core voltage. for me, I will not run the CPU over 1.35v.

@@KleoYan ok thanks for replying 🙏🏻 Sir Me using Deepcool LT720 aio on i713700k and Rtx 3060 ti Gpu but temperature up 75c to 80c it safe on 2k higher setting for gaming

@@dipakthakor9455 if you can run at load at below 85 degrees celcius. It’s good temperature as compared to 90 degrees celcius and above.

Hi Christopher Moutsos, welcome to my channel. Yes you will need to update the bios to support intel 14th gen processor.

@@KleoYan Thank you for the reply. One more question, do I have to update BIOS immediately after building the pc or it doesn't matter? Can I like install windows, apps, games etc and then update it?

@@christophermoutsos173you can do that if it boots, but my style will be update bios first before installing windows

@@KleoYan With the current budget I can't go for an even more expensive motherboard so I ended up on this one. Thanks for the info 👍🏼

@@christophermoutsos173 hmm actually there are even better value boards. If you don’t mind aesthetic. For me personally, I will aim for boards that are features which I need. I dont really care about aesthetic. Aesthetic to me is not just to make a pc like a Christmas. We can be creative and the most major thing you want of a system is, to perform as you want it to be. Have a look at MSI B760 Tomahawk DDR5.

Hi Pedro A, welcome back, I was saying that in my demo, the Switch Microcode is under AI Tweaker\Tweaker's Paradise but back then the bios version was Ver. 0812 where currently it might not be this version. As what I know the latest bios version have gray out the microcode option. you might want to find the ver. 0812. Kindly note by using older version bios, there might be fixes on new bios which you can't use.

@@KleoYan Ok I understand. Thank you 👍

@@pedroa3272 you are most welcome and all the very best with your setup. 😉

Hi Дима Стрелец, welcome to my channel. I am using the Arctic Liquid Freezer II 280.

Hi Rohit Official, welcome to my channel and yes this board do support 12 or 13 gen i9 processors.

@@KleoYan thank you 😊

@@RohitOfficial786 you are most welcome 😉

Hi dixansh tiwari, welcome to my channel. Yes you can. this board does support it.

Hi Rog Wan, welcome to my channel. Best if you can check your fans ampere. If one is not Above 0.30a you are ok to daisy chain 3 fans to one header. If it’s of 0.25a you can daisy chain 4 fans. So best to check your fan load in ampere. By the way, I don’t quite understand what you mean by up the fan header’s A in UEFI.

@@KleoYan Thanks for the reply. You mentioned in the video that you would set the Amps of the Fan header to 2 Amps? Did you mean it's possible to do it manually in BIOS? Also I keep reading that In B760, undervolting requires 104 microcode in the BIOS to prevent Intel CEP intervening and causing performance drop?.. Not even sure what it means lol and that apparently undervolting in B760 works but you loose performance from the chip mainly due to voltages still running 1.4V instead of the 1.2V even if you adjust TDP? Kinda confusing since it seems to work fine form your video... Sorry for all the questions but like I said, not new to PC building but new to tweaking to that level so just trying to understand so TY in advance. At this point I don't know if I should just get a Strix Z690F to be sure everything works or this B760F since I do not want to use a stock 13600K I will def undervolt but don't wanna loose performance in the meantime.

@@0nyxh oh ok.. what i meant was. If Asustek can set all to 2 ampere instead of having all as 1 ampere.. as you can see on the specification page. It does not matter if it's pump, cpu or case fans header, all are rated as 1 ampere. As for the undervolting, I am more familiar with ASrock board which I apply my method to undervolt on this motherboard. I have notice that it just hunger for more power at default. therefore I did the offset, just letting the processor grab what's needed. too bad I have no time to go into the load line calibration, which I infavor of doing. I hope I did answer your question. The key factor to tone this aggressive motherboard is to cap with a limit and allowing offset for the processor to draw enough to perform. so these are what I did.

@@KleoYan ok tyvm for info.

@@0nyxh You are most welcome. All the best with your build

Hi Ильнур Беркутов welcome to my channel, I do not have the Aorus Master B760. This is my personal opinion. If you intend to do overclocking. Z790 is still the best way to go.. If it's for default and undervolting, don't have to spend so much on above mid range motherboard. You can save up to spend on better rams or gpu or even m.2s.

Hi Saurav Goswami, welcome to my channel. For a decent usage by default, this board is good but kindly note on the default power settings. It's an agressive board, you might want to tone down the power consumption.

@@KleoYan thanks

@@sauravgoswamisg you are most welcome and all the best with your build.

@@KleoYan I have more one questions this motherboard is good MSI PRO Z790-A WIFI DDR5

@@sauravgoswamisg I have not tested the MSI board. So sorry, can comment on this.

Hi @enderkeshin110, welcome to my channel. To be honest I am not really good in Overclocking, I only do undervolt. so sorry that I can't aid you on this.

CPU konusunda soruyorum GPU degil. 1750 değer yazdınız o ideal mi diye soruyorum ?

@@enderkeskin110 for my CPU offset .. yes I did it with 0.17500.

@@KleoYan 0.17500 olunca biraz kasmaya başlıyor

@@enderkeskin110 Hi I can understand that, but I have a good bin processor, so to me it does not twitch. if it does, you need to tweak it down. maybe 0.12500

Hello Keponen, welcome to my channel, in general, I will pick this board over any Z790 boards from Gigabyte, Asus and MSI. That is my pick. reason being of the price and feature set. Not forgeting the build and after sales support for me.

@@KleoYan had any trouble with bluetooth? the 1 reddit post I found about it mentions its not working. its very expensive for a b760, 30€ more gets me a asus strix z790-h or that Aorus. But they all seem to have issues so Im stumped

@@keponen331 hi, I am terribly sorry of what I have answered, I got mix up on my reply.. What I mean was another board which is the Z790 ASrock Nova, I will pick that board more than any Asus, Gigabyte of MSI board. kzfaq.info/get/bejne/e9mWqpt70baydp8.html . now back to your question on this board, I would pick the MSI B760 Tomahawk if budget is of an issue.

@@KleoYan thanks for the replys. Asrock Nova is too expensive for me 450€. Im looking at that ROG B760 for 250€ and ROG Z790-h 300€, Gb Z790 Aorus Elite 300€ thats my limit.

@@keponen331 oh ok.. but if given with your choice, I will go for this Asus B760-F and I find it no point to get the Z790-H which has limitations. now please note I am not familiar with Gigabyte boards of this new era. you might want to ask around at reddit forums.

Hi Spartan Eu, welcome to my channel. If you are overclocking a 13900K chip. I would advise you to go for a z790 board. As there are limitation of what this board can do.

@@KleoYan y do not want to overclock the cpu .. an i9 13900 i alredi u loked no y just gona put form mmdos to work on 5 gb 😁😁

@@spartaneu8583 it's up to personal choice. I choose not to overclock as I use my PC for work, not for gaming. It will not be advisable for me to have an unstable PC. As why I choose the 13700K variant. is the AVX decoder and encorder.

Hi Anis Boussahia, welcome to my channel. I believe this will help you out www.xda-developers.com/download-windows-11/

Hello Sandeep Singh, welcome to my channel and thank you for your feedback.