Asus ROG Z11 Case, the best Gaming ITX case? (ITX is not necessarily Small Form Factor)

No video

Asus ROG Z11 Case, the best Gaming ITX case? (ITX is not necessarily Small Form Factor)

Рет қаралды 192,882

Күн бұрын

here a little build i made for Asus in the new ROG Z11 case, full watercooled
maybe THE best ITX gaming case?
specs
Intel I9 10900k
Asus Strix Z490-I Gaming
Asus Strix RTX2080Ti
Asus ROG Z11
Asus Strix 750w psu
Snef Computer Design Custom Cables
TeamGroup XTREEM ARGB 2 x 8gb DDR4 4000mhz
Silicon Power SSD NVME 256gb
Heatkiller CPU and GPU block
Snef Computer Design Custom reservoir
EKWB DDC pump and pump top
EKWB Vardar RGB fan
Darkside LP240 slim radiator
Darkside fittings
Darkside chromed copper tubing

Пікірлер: 303

@rikachiu 3 жыл бұрын

You sir are a master pc building artisan. Watching you install that custom distro plate and it fitting in place perfectly was extremely satisfying and I am trying to figure out how you even made this work in such tight spaces. Absolutely amazing job.

@upsnef11 3 жыл бұрын

Thanks a lot , really appreciate

@PirateMods 4 жыл бұрын

Beautiful build Snef. Your builds are always top notch.

@Riel93 4 жыл бұрын

That looks HUGE for an ITX case.

@timpatrick564 3 жыл бұрын

As soon as the person comes into frame I was like "The only way this thing isn't too big for an ITX case is if this guy is Gregor Clegane.

@gamer.central 3 жыл бұрын

Tim Patrick 😂

@DDnight546 3 жыл бұрын

@@timpatrick564 Gregor can put that case in his pocket for sure.

@dallatorretdu 3 жыл бұрын

A bit smaller than the dual radiator Singularity Wraith if I'm not mistaken, so it has it's place since Singularity sold quite a bunch of those

@commercio3564 3 жыл бұрын

It was actually designed for ASUS' own Mini-DTX motherboard.

@BravoSix_Going_Dark 3 жыл бұрын

This is awsome!! great to see your still going!!!

@Dosahka 3 жыл бұрын

Even a 15-19L case considered as huge ITX case, this is basically a sub-atx.

@Jixxy_EU 3 жыл бұрын

Really looking forward to getting this. Basically the case I was waiting for. Finally sth. that shows hardware to the right side. Great work done by you sir :)

@NutellaCrepe 3 жыл бұрын

At 40L, it's the most self-defeating ITX case.

@Traventine 3 жыл бұрын

Wow, it really is 40 litres. What even is the point of this thing? There are ATX cases on the market with HALF the volume of this!

@NoNamePDG 3 жыл бұрын

ITX is the sizedefinition of the mobo, not the size of the case. if the case is 300L and has only a ITX mount its a ITX case... and No this case was never marketed as a small form factor so this is not selfdefeating

@Traventine 3 жыл бұрын

@@NoNamePDG the whole point of using an ITX motherboard is to have a small computer. A large case that only supports ITX is just plain space inefficient.

@duke_n3d 3 жыл бұрын

laughing in my 7.2L Dan A4 laugh

@kingxeiros1818 3 жыл бұрын

@@NoNamePDG by technical definition, yes. The whole purpose of said size is for smaller form factor builds, so yes this case is self-defeating. It's like putting an ITX board in a server case.

@giftedcracker 3 жыл бұрын

super sick build. love the distro plate/ res. seems like you're asking a lot out of that single 240, I still love it tho

@EileenTheCr0w 3 жыл бұрын

Idk why everyone hating on the case, its still smaller than a full size by a good amount and looks nice with a good range of options for full size cards, etc.. its just in a niche middle space to fill that gap for someone who doesn't want an enormous machine on the desk, but still wants to show off a bit.

@RojasTKD7 3 жыл бұрын

It definitely is the best at being a BIG ITX case, that's about it. Might as well get an mid-tower.

@EileenTheCr0w 3 жыл бұрын

But it looks sleeker than most midtowers and is still way smaller.. and you can't fit as many ports, waterblocks, etc.. in most itx cases. I think its a good middle option for those that don't necessarily want a mini pc or game console like system but a smaller showpiece.

@RojasTKD7 3 жыл бұрын

@@EileenTheCr0w To each their own, That's why we options for everyone to choose from. personally it's too hot of a case and I'd take a Jonsplus i100, Raijinteck M EVO PC-O11 Mini if I wanted a larger ITX case to water cool. The O11 Mini in particular is a nice looking case (far better looking in IMHO). Even my Q500L is smaller then the Z11 and it supports full ATX motherboards (the O-11 Mini can too). All whike having superior air flow and being easier to build in. I don't know what you mean by "fit as many ports"... it's ITX after all. If the "looks" just appeal to you, than that's cool too.

@vlissblisskiss 3 жыл бұрын

Makes sense to me as a overkill liquid-cooled ITX system that doesn't take up much more space than a standard ATX system. ITX is becoming the most reasonable gaming option in my opinion, given there's essentially no need for more than one PCIE slot anymore. Onboard sound is usually good enough, no SLI/crossfire purpose, etc. That said, it's way too expensive, and only exists for an even smaller niche than boutique SFFPC builds. It's gorgeous though. Great aesthetic

@shaoyiche8483 3 жыл бұрын

This case finally looks right with your build.

@Hellrazer2099 3 жыл бұрын

Beautiful! That distro plate is awesome. You wouldn't happen to be selling them by chance? Would love to get one for my Z11 Build.

@xXDarthBagginsXx 3 жыл бұрын

Beautiful work as always man, surprised you didn't find a way to put Blue & White in there ;) (DarthBaggins - OCN) Love that case and glad to see more mainstream companies entering the SFF space.

@kylemagee2626 3 жыл бұрын

Dame that’s so beautiful I spit out my brink when I sent it complete

@thetechrealist 4 жыл бұрын

How is this even itx? The whole point of itx is to be the smallest build. This should be micro atx cause this case blows for a mini itx build. On the bright side, it still looks cool.

@gobSIDES 3 жыл бұрын

Yes exactly, it's a lovely case purely for the show stopper aesthetic factor it has for a high end gaming room/man cave, but for me when think itx I'm looking toward the smallest possible build that can maintain amazing performance with compromising as few features/hardware accommodations as possible... This thing is practically enormous by itx standards.

@ichdiewurst6153 3 жыл бұрын

Phanteks Shift X is an itx rig tho.

@bekahsmith1317 3 жыл бұрын

you do know that ITX is a form factor that simply describes the motherboard that a case supports. It's not a form factor for a case.. Calling it an ITX case simply means that is what you have to use with it.. I have a Shift X and it's an ITX case.

@14howZz 3 жыл бұрын

@@bekahsmith1317 still the footprint of this case defeats the purpose of going ITX with your build. Just saying.

@fewik8567 3 жыл бұрын

@@14howZz that would purely depend on your use case, a build like this is for aesthetics and not to be small, and that's a big trend with pc's, itx is far more versatile for single card systems that matx or ATX, a case similar in size to an ATX case means you could fit a lot of extras that would require you to have an even bigger case, although this is purely for aesthetics so doesn't waste the point of itx to ne

@SimonOpsi 3 жыл бұрын

I bought this case. I built in it. It was a real nightmare accessing the rear io and put in an Asus rog strix rtx 3080. Even worse when I had to troubleshoot it. There's so much stuff in the way and it gets annoying after a while. If you are building your frst PC, then I would recommend that you get another case.

@ericnewton5720 Жыл бұрын

I hated the hidden mobo rear IO inside the case, under 2 fans. However I honestly loved the way this case looked, but I scrapped it and went with NR200P max case instead.

@MyTwinFlame 4 жыл бұрын

The best looking one for sure , looks like a dream !!!! Ans guys , thia Full size GPU Full Size PSU this is inovation !!!

@aldrinsangma5363 3 жыл бұрын

This size can fit ATX motherboard. I hope big companies starts manufacturing 10 to15 litre sized itx cases.

@hoantran4628 3 жыл бұрын

the most beautifull z11 case build

@GODLIKE99KINGZ 3 жыл бұрын

i like that it can be in the other side of the desk

@gamer.central 4 жыл бұрын

Cool build! But this cannot compete with other ITX cases that are much smaller, even the NCase M1 can fit 2 240 rads in a custom loop, cooling cpu and gpu in a much much much smaller footprint. It’s just too big for ITX, your build looks AMAZING though, props on that.

@bekahsmith1317 3 жыл бұрын

Compete how? It looks way better than the NCase M1. It looks much easier to build in.. Oh and you can use a full size power supply which means higher power availability. oh and it can fit the biggest video cards. pretty competitive. The motherboard tray looks perfect size for ITX since ITX is a motherboard spec not a case spec.

@baldino9165 3 жыл бұрын

@@bekahsmith1317 So are you saying, if someone makes a case that's as huge as a cabinet but can only fit an itx case for some hypothetical reason, it's still not pointless?

@bekahsmith1317 3 жыл бұрын

@@baldino9165 well when that happens, I'll take a look at it an give an opinion on perceived usefulness. However, not the case here and not really a relevant troll.. errr I mean comment...

@gamer.central 3 жыл бұрын

Bekah Smith it’s too big for ITX, it’s not space optimized, it could as well have fit an atx mobo inside

@bekahsmith1317 3 жыл бұрын

@@gamer.central not even remotely. Stop the hyperbolic comments. It makes it not worth it to have an intellectual conversation with you.

@ranieriteandrade9298 3 жыл бұрын

SETUP wonderful

@davesobani9565 3 жыл бұрын

Love the custom reservoir!

@peeposadboy 3 жыл бұрын

People need to realize that this is a showcase pc case. Just because it only supports ITX motherboards, doesn't mean it has to be the typical super tiny ITX chassis... One reason I hate the Mini ITX community is the fucking gate keeping. "Oh this can't be considered an ITX case because it's exactly 0.1134 liters over the limit of what we consider to be SFF" Like fuck off with that bs. The whole point in building your own gaming PC (or pc in general) is for it TO BE YOUR OWN. Fucking props to ASUS for thinking outside the box. Sure it might not be the most optimal of space, nor does it have the best hardware compatibility, but props to ASUS for thinking outside the box.

@Matador805 3 жыл бұрын

Should have cut the handles off the bag. Would have looked cleaner. Great vid!

@luish.1950 4 жыл бұрын

wow,,nice build, pls list all the fittings..and hardweare

@tobiweinmann3790 3 жыл бұрын

damn thats an sick setup you got there bud

@kuldipsingh366 4 жыл бұрын

At $499 AUD, good luck selling one in Australia.

@wintagestudios 3 жыл бұрын

itx cases are usually high priced for enthusiasts not for the poor

@svn5994 3 жыл бұрын

@@wintagestudios Maximum for a high-end case is 250 LOL.

@SuperLisandro86 3 жыл бұрын

@@svn5994 Maximum for a high end is whatever the manufacturer wants :P The Winter One Itx case starts from 379 USD, and it in my opionion, is not better than this one (but it is a trully itx case, not like this one). I like the Asus case, it is really a good case to showcase all of your buil in one side, but it is too big indeed. In Spain it costs "only" 198€.

@ar87ace 2 жыл бұрын

It's 900kr/90euro here in Sweden right now.. i'm thinking about buying one and sell it in a few months for a quick buck 😅 haa haa

@jamesnelson5741 Жыл бұрын

What is the 1st song? Also, DAMB nice build.

@TheD2D21 3 жыл бұрын

So we should start looking forward to cases that are water-cooled? Case will include its own water cooling circuit kit.

@chriswhite6882 2 жыл бұрын

That's awesome!

@xitisyeracoon8009 3 жыл бұрын

this case is so beautiful, but my question is only one 240mm radiator enough or it is only for show?

@aceberganabolic 10 ай бұрын

nice one but same case for atx cards is available ?

@NicoFritzler Жыл бұрын

a beautiful build. is it possible to get the cnc file for the distro or buy one from you?

@saturn8135 2 жыл бұрын

Definitely remarkable case and magnificent build, but clearly not the best ITX case.

@ouki4925 3 жыл бұрын

Call down SFF elitists. Not all ITX cases should be a damn copy-n-paste miniature metal box where it compromises noise and temps just for the sake of being small. Asus has something unique for the market.

@IgorMAssis 3 жыл бұрын

Noise and temps are pretty important in sub 11L builds. It looks like you don't know what you're talking about dude.

@svn5994 3 жыл бұрын

This isn't unique at all. This compromises temps in favor of looks while providing worse cooling than a FormD T1. If you're going to call people elitists don't talk out of your ass. 500 USD looks and cools worse than a case half the price.

@walteriiimurdong8505 3 жыл бұрын

so small yet so beautiful..simplicity is beauty at its finest..good job sir!

@aaims5518 3 жыл бұрын

great build

@jasonwang1444 2 жыл бұрын

Hi. Very impressive build. I want to build a custom loop for cpu only in this case and put it horizontally. Is the pump’s location still good? Thanks.

@upsnef11 2 жыл бұрын

Thanks a lot, the pump location is good for vertical and Horizontal with this reservoir but to have the pump at same location than this one , you need to mod a bit the case, i mod the passthrough cover a bit

@noelquiles3202 3 жыл бұрын

If you could just fit one more rad I would overclock, but with just that slim 240 I’d keep it stock.

@thegirthquake8574 3 жыл бұрын

You're right, ITX doesn't need to be SFF. But you buy ITX for it's small size. You wouldn't buy a mid tower for itx would you?

@Pallidus_Rider 3 жыл бұрын

Subtitles might be considered for future video ... 🤔

@erwalkerca 3 жыл бұрын

Noticed you didn't show the external connections to the gpu and motherboard I/O. Oh wait, there isn't any. You have to route the cables through an opening in the case and plugging them in requires removing a side panel to do it.

@terabitdefiance8022 4 жыл бұрын

So how did you get the case? Its long past due, probably due to covid. Im waiting on this case.

@lukelmaooooo 3 жыл бұрын

i swear the rog development team is run by cavemen "let's make a PSU with RGB even though most cases cover the PSU with a shroud!" "let's make the best ITX case. bigger always means better so let's make the BIGGEST ITX case imaginable!"

@Doshi-lp4tn 4 ай бұрын

😮 just ordered z11 for 76$ for the z590 2080ti w hk blocks toooo almost identical

@EGPIKA3 4 ай бұрын

Is it good with you ?? Because I want to order this case It costs 90$ in my country And what about GPU temperature issues ? I will install A770 16gb limited edition in it

@Doshi-lp4tn 4 ай бұрын

@@EGPIKA3 yes excellent value with 3 Asus fans, a controller rbg fan hub and excellent build quality, mine was barely touched, since the KZfaq reviewer didnt have a screwdriver. There may not be a pice riser cable though, so you may need to get a good one

@yarosm 3 жыл бұрын

only one radiator in such a behemoth , other similar cases offer at least x2 240 rads + some fans. what are temps under full load on gpu + cpu ?

@hsienfushih 3 жыл бұрын

I think it will be overheat

@SergeiSugaroverdoseShuykov 3 жыл бұрын

he's temps are blue

@alemu6653 3 жыл бұрын

maybe on full fan speed and with downvolting. But thats loud

@vZ3USz 3 жыл бұрын

U need to do full liquid cooling system because whitout ur GPU going at 90° (strix 3070 inside this case in game °90 and not only have really bad temp )

@taehwanwoo4128 4 жыл бұрын

Still not release in Germany, they said erly Q2 / 20, .so bad..., now i gonna change to inwin 303ek,cant w8 for the itx case in form of atx

@upsnef11 4 жыл бұрын

still not release here in north America, i think it will be on Sept 1 but not 100% sure but the 303EK is a nice case, both are great

@dirtnastyish Жыл бұрын

What a beauty!

@stevenescalera 3 жыл бұрын

I just wanna know what jam is playing 🤣. It’s super catchy.

@lockevaloren3938 3 жыл бұрын

Does this case have a handle or SOMETHING to hold on to in order to move from place to place? If it doesn't, its just a good looking Christmas tree without a star on top. Big miss.

@riadyang5582 3 жыл бұрын

nice setup

@alexandrhabensky 3 жыл бұрын

Real masterpiece ! :-)

@drk9950 3 жыл бұрын

I have a question. I know that the power supply can be mounted up to 160mm in this case. However, some communities have said that 180mm of ATX power will also be installed. How do I install a 180mm power supply?

@kenitoson 3 жыл бұрын

Awesome build but I’m also curious: Where’d you get that desk lamp LOL

@upsnef11 3 жыл бұрын

Thanks i bought it on amazon

@kenitoson 3 жыл бұрын

@@upsnef11 Do you have a name or link?!

@johnnemesh5459 3 жыл бұрын

No thanks, my next build will be an ATX case with Ryzen 5000 series CPU and RX6900XT graphics. Case is WAY too big for ITX. If you are going to compromise your build with an ITX motherboard, you should at least benefit from a small form factor.

@maikolrodriquez 2 жыл бұрын

I'd like to purchase a reservoir/distro like this, in the US. Do you sell this or?

@notmandicky 3 жыл бұрын

well done

@tosemcriatividade6698 3 жыл бұрын

In the final of the vídeo ,whats the name of the music ?

@ak_mayhemp8946 3 жыл бұрын

Absolutely build and all... But how does it cool?

@Hungnguyen-ic2fn 3 жыл бұрын

Bro, Could you share to me the drawing of water tank ? Thank you so much !!!!

@raykenian 3 жыл бұрын

the best of the best ITX gaming case...

@radiantav 3 жыл бұрын

ITX case is not just the case that uses ITX motherboard - it should be at least under 15L. This thing is half a meter tall!

@microsoftwindows9522 3 жыл бұрын

Great build. The case looks great, but can't see it being hugely popular practically. The music was hideous too, sorry.

@dickofferman679 3 жыл бұрын

ITX should have a mandatory under 15L. between 15L and 20L would be micro atx

@estate-tidus1007 Жыл бұрын

How does it make you feel this case is $60 new on Newegg right now and still doesn't sell well.

@upsnef11 Жыл бұрын

very happy to make this build and still happy by the case , it was a sponsored build by Asus. i would pay more than 60 fior this case , still one of my fav its case

@valkala8736 3 жыл бұрын

You know what would be nice? the build specs!

@upsnef11 3 жыл бұрын

added to description

@Parkks528491 3 жыл бұрын

what kind of fittings did you use?

@upsnef11 3 жыл бұрын

for this build i use Darkside fittings

@AndrewOng 3 жыл бұрын

your video could have been made better by showing some temperatures and benchmarks

@hawktechnology6041 3 жыл бұрын

sublime...

@jacobgarcia7706 3 жыл бұрын

Amazing build i would love to know the specs

@upsnef11 3 жыл бұрын

added to description

@peeposadboy 3 жыл бұрын

Did Barrow rip off/steal your design for the distro plate?!?!

@upsnef11 3 жыл бұрын

yes, or heavy inspired, they had access to some of my phot before launch of the Z11 here in NA, the Z11 launch was way before here in China

@peeposadboy 3 жыл бұрын

@@upsnef11 Man that kinda sucks. Hopefully they at least asked for your permission, or asked if it was okay. I figured most PC component launches are launched in Asia/China before the U.S. We're just starting to get 011 Mini pre-orders delivered. Mine gets here tmrw. I still have an unopened Z11. I was going to get the Barrow Distro Plate, but if it's a rip-off/stolen design, and they didn't credit you or at least ask... I wont support that product, unless it'll support you, the original designer. I guess the Bykski Distro Plate is the Distro Plate that I'll be going with if I end up using this case over the 011 Mini!

@akitabuyanaa8675 3 жыл бұрын

i wish i had this one

@michaelsutemire6874 3 жыл бұрын

i didnt see a asus strix rtx2080ti being put into this

@akshaygaming1869 3 жыл бұрын

Why are the io connections internal Why??? No outer cable management Asus why ??

@Z1M0Z1M 3 жыл бұрын

Beautiful case but really...Intel? In 2020? Must have gotten a good deal on the mobo and cpu. Really nice case though.

@thomaslandry1215 3 жыл бұрын

I came here for the music

@dv2045 3 жыл бұрын

Thermaltake G3 is an ITX/ATX case and is way smaller

@Polandmet_Meteorite_Videos 3 жыл бұрын

Using ITX mainboard in ATX case have no sense. But nice build

@user-px1qo9ju7p 3 жыл бұрын

Cool really!!

@Braeblade123 2 жыл бұрын

Can you put a download for the distroplate

@sparhawk1228 3 жыл бұрын

Waiting for a Asus full tower case....

@anepicotter4595 3 жыл бұрын

You're looking for the ASUS Strix Helios. I don't really like how it looks compared to this though

@LasTCursE69 3 жыл бұрын

I have an Asus TUF GT501 case and I'm pretty happy with it

@sparhawk1228 3 жыл бұрын

@@anepicotter4595 I usually shop through third party stores and I have not seen that case available. Will look into it. Cheers.

@Alexux1996 3 жыл бұрын

How are the temps ?

@sahilkukian2004 3 жыл бұрын

great

@SuperQBoi 3 жыл бұрын

For the price of this case, no. Rather spend the little bit more on a NZXT H1 that comes standard with a SFX PSU & an AIO cooler

@syedEpic2 2 жыл бұрын

Kalau pasang kat ps3 pc case ni memang best.. Ps3 cepat panas

@MohamedElHanoun 3 жыл бұрын

❤️

@mattevans1643 3 жыл бұрын

An ATX case, that can't fit an atx motherboard. Yep, definitely the best ITX case. I will say it's very good looking. They just need to cut it in half.

@leeleecam6037 3 жыл бұрын

I really like this one, but if i put the 3090 there with the i9 X and this thing blow up?

@leeleecam6037 3 жыл бұрын

I never did a pc build before, this is why i am so "scare". I want all the power to game and work, but if this dosen't work?

@yanfeizhang789 3 жыл бұрын

I really want to know how much!

@recsoncanton9965 3 жыл бұрын

May i ask the estimated costs for this one?..

@campyhub 3 жыл бұрын

Where can I get one of those distro plates??

@z3brox254 3 жыл бұрын

Sound test ?

@Slamscape 3 жыл бұрын

where do i go for the custom res?!

@Uncle4T 3 жыл бұрын

That's a big ITX case.

@hamed1525 3 жыл бұрын

cooooooool Song Name ??

@LamaChaosEnte 3 жыл бұрын

What about Temperatures with just one 240 Radiator? I'd really like to know

@upsnef11 3 жыл бұрын

enough for day to day use and gaming, for sure no overclock i undervolt a bit with the OptimumTech guide and temp is around 60 for GPU and 65 to 70 for cpu under 100% load

@helveticimperator6611 3 жыл бұрын

@@upsnef11 There isn't an 120mm rad place in the floor of the case?

@helveticimperator6611 3 жыл бұрын

At the front of the psu?