Adam your one of the most underrated KZfaq creator in terms of repairs. It's so enjoyable watching you fix the products at the end!

33:00 you monster! XD (love your videos btw, very informative and entertaining)

I actually did think he was going to leave us hanging and I did for a second think that you were in fact a monster. 😂

The mat looks great and colour helps the camera. Nice one Graham.

I can't be the only one that would like a 2 hour red herring search video. It's those deviations and mistakes that teach the most Thanks for continually taking the time to record and edit these videos. I appreciate them a lot. ❤️

At this point that intro music is classic and the most relaxing thing ever:>

Thank you so much ! Always a pleasure to be with you!

NB: Remember to FULLY test the touchscreen other than the display before gluing it down! I didn't get lucky one time, and it was a nightmare to dismantle all the work I've just done

The brightness is Fine Graham ... It does look more balanced ( Picture Wise ) Cheers for Vid

I’ve done similar repair attempts using a rice bag. Basically just fashion a long piece of fabric or even an old sock and fill it with rice. Tie the end somehow. Then just heat in the microwave for about a minute or so and you have a heating pad. It also works good when you have muscle aches.

Nice job! I second the other comments saying to try fix the backlight. Obviously it varies from model to model, but once you’ve got inside the display it’s not that hard to find and replace a blown LED COB. The most difficult thing is not getting any dust inside the panel. Always wear rubber gloves so you don’t leave fingerprints. There’s no harm in practising on a screen that’s defective anyway, so why not give it a go :)

The screen on my Samsung SM-T970 is showing a perfect picture. Yes a move to a "One Colour Mat" would get rid of the disruptive screen effect.

fully agree with the grey color you pointed out.. i like it a bit darker.. ;)

Fine peel. Worth the price of admission.

The Brightness is perfect for me not to bright not not bright enough just perfect.

the new mat is nice!

Good job! Would have liked to see some autopsy on the old screen. Would be interesting to see, if there was something wrong with the backlight driver on the controller board or if the LEDs them self have gone bad over time.

Thank you! Always love your videos. Mat looks great.

Brightness is perfectly in order now.

I was about to comment about the partial peel ... glad I waited :D :D

Very nice desk mat, it looks great.

The correct way is not the bags but a heated silicone mat made for removing screens which go up to 100c

The iMac screen removal wheels are good for this sort of thing. They don't distort when heat is applied any you can drip isopropyl alcohol on the wheel which wicks into the gap to loosen the adhesive further

New matt looks fine. Thanks for another interesting video

The Mat was a good choice.. Looks nice

Very smart job Graham.

Love the peel of the film at the end, that was perfect

Love your work :)

The mat works good. Makes me feel like I’m in the woods but color blind. 😁

Great Job!!! Makes much fun to watch your videos. Keep on filming.

Easily after the first heat and first pry point on the screen you can use adhesive desolvers like 530 sprays or some types of liquids. Just spray on the outside of the plastic card NOT directly to under the panel. And no need to more heat.👌❤️

what the hell was that all about at 33:36 ? funny is the way you have butchered that one out m8. lol. great video as always although I was looking forward to another bios programing video

Could I suggest you rename this part of your channel "Let's Fix Laptops" :) I can't remember the last time I saw a desktop on the channel, I'm not complaining, your content is excellent, keep up the great work and thank you for sharing

Very nice man. Nice and simple repair, all went good and clean.

Good job Adam !!! Very professional !!! I enjoy your videos very much, and your new deskmat works great. Thank you for sharing your knowledge. 😃 And i like the teaser with the protective film. 🤣 Keep it up. 👍

New mat is great. Just keep using that one :)

New mat is 👍👏🏻

your getting too good at this.

Next time you have to try a clean removal like this. LCD removal wire (Tungsten or piano wire) will help a lot to reduce stress while being very effective. Aliexpress and ebay will have listings for this

Hello sir , I’m from Miami Florida and I have been following you for about a 2 years and I love your content and I try so hard to never miss a video ? Also love the fact that from what I see in your post is that almost nothing scares you and you go all in ? Thank you 🙏 and please keep up the great work ?

Brilliant repair!

Looks visually good to me, and the pattern is a good contrast.

Your mat is perfect!

I'm no expert but glass is melted and cast into molds so using a hot air gun to remove the glue shouldn't catastrophically affect it. To my delight, you did an excellent job of removing it intact.

The new mat looks good! Stay with something lighter, if you do change it. Keep up the great work!

well done!

I had to remove the vertical screen off my frends apple i-mac to replace the hard drive. I used a couple of old feeler gauges to slide under the glass. The gauges that were used for points or sparkplug gapping. Each gauge set have the rounded end and a selection of thickness. My old paint stripper gun on the very first setting was just hot enough. Never stopping in one place. No damage 😀

you can honestly fix the old LCD screen if you are willing to check the backlight LEDs

You said no backlight could be caused by 3 different causes, but actually it is 4. The LVDS cable could be not properly seated in the LCD connector, thus having no backlight, it happens all the time, even if the cable has been properly secured with tape.

The mat is fine the way it is. Some laptops use the quick release pull strips to free the panel from the frame but as we know those do not always work all the time.

I think the solid colour would be best but this is certainly an improvement over your old one. Good move!

2nd or 3rd grey👌, if the top is grey then I see white👍 The voice over makes me want to watch Rimmerworld S6E5 Red Dwarf

All Useful videos thank you very much..

So buy correct panel, when you get it check if panel and touch (depends on laptop) works before any assembly or whatever. If works, just assemble and do everything carefully, take your time.

Great repair - always edge of the seat viewing when displays are being pried apart. My two cents on the mat repair surface : a single colour would make it easier to find errant screws or tiny parts. Anyway, another great vid.

Great video as always, new mat looks brilliant and on the plus side tiny laptop screws will be easier to spot. You forgot to tell us that you're a time traveler as you went back to 2021 🤣, I know it's from the lack of CMOS battery though 😉

That mat does show all fifty shades of gray. 🤓

I think disconnecting the internal display connector doesn't necessarily force the graphics chip to output to the VGA/HDMI ports - it probably depends on the interface: if it's a dumb LVDS cable, I doubt the chip even knows there's a display there or not - it just outputs to that connector anyway, even if a display panel "listens" or not. It probably shows up in dev manager as "standard PnP monitor" or something similar, even if the panel is not there. If it's a DisplayPort (eDP ??), then yes - it might actually know if it's physically there or not and default to the external output...

This guy has a lot of experience, you recognize this by a lot of things he is saying

Nice job Graham. How are you surviving the mild Australian weather? 😓😓😓 I hope you are all safe and sound in the heatwave. Stay hydrated!! 👍

27:30 Depends on the device, on my old xperia phone I tried several cheap pre-cut adhesive strips and a more expensive one, all of them came off, the more expensive one lasted much longer, but the screen would not stay on until I used some b7000 which still hasn't come off.

yes on the solid mid-tone mat. Also, might move softboxes so they don't reflect in the gloss screens when laid flat on bench.

Mat looks fine. You can get a true middle grey mat to help with exposure. True middle grey 18% that is used in photography. Logitech Studio Series Desk Mat (Mid Gray) #956-000047. Not a certified 18% grey but this should work.

Wow tres bon video 👍

With all those screws knocking about, have you ever considered using an ice cube tray to keep them more organised than "just some piles"?

Very successful!

good job, not easy to deal with these "glued" stuffs ...I don't think I have enough patience for these nowdays :D

Great Job Graham. If I may suggest, some observational advice : - I would leave protective film on for the customer to pull it down...In this case you'll get that "Wow" effect from the customer for your job and it's also more professional, I think. - The new double-sided tape I would first prepare / cut on designated size with scissors or on cutting mat with exacto knife. In this case you'll get nicer edges and there is no option to damage the top lid. Take care.

I had apparently the same issue with an old dell. Decided not to replace screen and keep the laptop for spare parts. When disassembling it I found that the screen cable had not been correctly inserted from the factory. Pushed it in correctly and it now works again. Glad I didn't buy the overpriced replacement screen.

imagine at the end as he was peeling off that plastic sheet, some static charge had built up on it and breaks something 🤣

Using ex-credit card, or ex-ATM card for create opener, make sharp on one side, it better then using metal opener & pick opener, it better strong & flexible 💪🏻👍🏻

New mat meta looking sharp. It also goes nicely with what I assume is a keycron keyboard

I like the matt you have there.

Good Lightning! The Mat is awesome! Where to buy?

Edit: sorry I missed the part where you plugged in an HDMI to get output, ugh I shouldn't watch these while I'm working. great video as always, just wondering if plugging an external monitor was an option to see if the laptop was POSTing? Since it appears it was turning on in the beginning just nothing on the display itself.

I haven't finished watching the video but I'd like to say that when one disconnects the battery, it's always good to try to turn it on, so all capacitors are discharged. Typically it's going to be fine, but you never know 😅

"Have a sense of humor, not a monster" yeah, yeah, but... still... i mean, a peal it's a peal. Come on, we all know that the only reason we fiddle around with electronics it's because of that sweet peal action.

Camera on the bottom of the screen? That is first time I see that hehe 😁

get a heating bed, and some times there is not adhesive supplied. Get a tube of B-7000 Glue.

i use a hot knife for removing screens. that being said don't toss that screen you can recharge the LCD gel

Did you stick the cover back on JUST to annoy someone? Cuz if it was for that, I salute you.

hey, you finally got a torch and found out what I expected.... should have done that one before you even opened the unit...lol hate to tell you shit, but I have been servicing laptops for about 30 years now

I do this kind of work 5 times a week. After a while you will be like ya no problem. You might even take on Surface devices. They seem to be the hardest. On screens like this I always replace the screen with pull tabs and not b7000 glue because you have that bottom chin you can remove.

The mat is fine. I wonder if the customer would feel better if you let him remove the plastic cover from the screen. I would feel better.

Black is slightly darker than grey. Noted.

Would really like a video on how to source replacement parts. Recently ordered a replacement fan for a thinkpad. Hope it fits when it arrives from China

"Smushed". Technical term.

You can use suction cup to separate front glass to lcd

Nice one.

i hate that u pulled of the screen protector i had left that to the customer fo give them that new screen feeling. But what even pisses me of more is how you stuck it back on!

Hi Graham why did you not try to fix lcd screen. Mostly there are fixable and mostly there is just capacitor or fuse shorted on backlight circuit that could you save a lot of money.

First thing I do is connect external screen, and try key combinations. Also acer V5-572P have screen glued to touch panel and panel glued to back cover. and that's insane.

I like how they put that huge sticker on the Asus logo so it would not be stopped in shipping from China for being counterfeit.

That screen could be repaired instead of replacement , it was just missing BL_EN.

Your Using Logitech Brio 4k and the picture is actually quite good.

Mat is good, but why don't you have something to put screws in so you don't lose them? The square backlights are distracting

Light grey would be OK. That mat is too busy with all the crenulations and wavy lines. IMO

nice one

Hreat video, i was holding my breath when trying to get the screen off :-) Can i ask you what the audio track you use at 25 min is?

Can you put a mat in the washing? Or uh, more extreme, a pressure washer - maybe a test once mine starts ageing.