*AT3 Tactical Available @ Amazon* amzn.to/46ot4am *New Monthly Giveaways & AT3 Tactical Videos* (No Firearms Sales) content.at3tactical.com/

All I can say is Tubbz buffer spring!!!! That thing works!

Prefect timing im finishing up a 13.7 .308 extra knowledge is always good!

Watching this AR-10 being built from start to finish has been very informative and interesting. You have captured every aspect needed for someone like myself with very little knowledg to build an AR-10. Advising with the pros and cons and what to consider in a build. Keep up the great work.

That is the best way to install the gas tube hands down!!!

You are my new favorite channel

Why is it that with all the technology in 2023 we still don't have AR 10 carry handles??

Best AR-10 / LR-308 informational build series I've seen. Super helpful, way to go! Looking forward to the final episode. It's making me want to go watch the AR-15 series now. Y'all have some awesome parts too, really enjoying my AT3 angled foregrip.

I’m building an A/R 10 in 308 . i’m starting with the aero precision mower. I didn’t realize when I started this build that there were so many variables with the AR 10 and everything isn’t mil spec 40 AR 15. You do really have to choose your parts wisely .

I just ordered a Armaspec AR10 Gen4 Stealth Recoil Spring today for my DB10, I plan to use the lower for a 6.5 that I'm building, both will have adjustable gas blocks. Loving this series, thanks?

job done for buffer no more Questions

The A5 receiver extension literally *IS* an RE10 receiver extension that has been around for 20 years.

I just got done with a Diamondback DB10 and it was a punchy 👊 girl... I used a Roller Cam pin and a Griffin armament+15% spring and a heavier 5.5oz Short 308 buffer and it made more difference changing those than I expected It's great 👍

Good informal video on AR10's

I'm about to start my m5 .308 build. I'm going to use exactly the same parts. Fixed Luther stock. All Areo parts kits. Looking to shoot long range. 1000 yards hopefully 😅

Hard to get use to Randy not working for BRS selling reef tank products haha. Hear his voice and do not think weapons haha

Troubles in cold with AR? Check your gun oil make sure it don't turn to syrup when in freezing temps. Another tip is the extractor o ring getting to hard from the cold. The extractor o ring may need to be removed. Great video.

Currently reconfiguring my aero Frankenstein AR10 from “DMR” to battlefield so swapping out parts.

Yeah no second build here, I had to save for almost a year to get the pieces I got, thankfully everything works great. However, I’m carving my out stock out of poplar.

Hey dude, how about being more ninja and putting a brass catcher on your build!!! Talk about being there, but not being there, know what I mean???

If you use a side-charging BCG, would there be any additional issue regarding the gas when suppressed?

Using a armalite ar10 gas tube in rifle length systems will usually solve most of your short stroke problems. It engages the gas key on the bcg better and allows for proper build up of pressure. I cannot stress this enough. So no ... gas tubes are not the same on rifle length guns. Always use the armalite length tube.

Would using a carbine length tube with a carbine legth spring work well with an h1 pistol buffer?? It does FIT but i havent got a chance to tune it with its adjustable block. but that being said what weight ammo would you recomend. Fyi its a mid length gas tube

Have you tried using an A5 tube on an AR-10 and if so? How did you set it up? Springs, buffer, it’s weight? I have an A5 on my AR-15, but my first AR-10 system

Built my aero AR-10... Aero Charging handle seems to bend when operating the gun, this causes either the CH to get stuck when pushed back to lock in receiver, or worst case BCG gets stopped by the banana booger hook.... I've used Knights armament M110s in the army for years, never had an issue with the charging handle bending, impeding the operation of the rifle. Is this an AR-10 quirk? Better CH options that don't bend out there??

My AR10 cycles great and ejects brass constantly As far as I can tell that is working great. But, I’m curious if buffer can cause accuracy issues.

Now try one that can fire subsonic ammo supressed and cycle normally... lol

Currently own a M5 and want to upgrade the barrel. Any recommendations?

Randy, I have a Ruger SFAR 308. I am able to run a few AR15 parts on this rifle. I am looking for a larger charging handle than the stock military charging handle due to where my scope is mounted. I plan to run a suppressor part-time on this rifle. What impact would there be if any to running a charging handle with the venting ports full-time. I am new to the rifle and I am learning that it can be tricky dialing in the adjustable gas block to reduce recoil and control shell ejection.

7:47 whisper pickle

Any insight on wether the Odin Works adjustable buffer weight is compatible with a rifle length system? I’m having failure to eject issues with an adjustable gas block.

I'm having a had time with my gas break when replacing the handguard. I can't remove the gas block ant advise?

Did you use a Wilson combat ar10 gas tube? Or a regular one?

Anyone no if the DB10 strip lower will except normal AR10 triggers and pins, safety etc…

Been tweaking an AR10 build lately. Its a PSA 18" 416R stainless barrel in an Aero M5 upper/lower combo. Started out with a flash hider and standard spring & shorty-length AR10 buffer. Ended up putting a surefire brake on plus the BCM MK2 intermediate length buffer tube & rifle spring, but it wouldn't lock back with a Mk2 intermediate length (4 inch) buffer. So the current combo is an H3 carbine buffer (3.25 inches) with BCM's mk2 tube and rifle spring. The gun locks back every time on an empty mag/manually, it is noticeably softer with this combo + brake, and lengthening the travel of the BCG just slows everything down and reduces parts wear anyway, so its a good setup. I have also yet to have a malfunction after about 200 rounds and a few setup changes so far. But it is still overgassed/under buffered, as the ejection is fairly forward instead of 3-4 oclock and you can generally feel that it is still quite pushy in rearward recoil, although a lot less of a "punchy" or "snappy" sensation against the shoulder as it was before. So, the idea is (as a defensive/tactically-minded rifle integrated into my "systems") to skip messing with adjustable gas blocks as it might just introduce a possible failure/gas leak/carbon locking issue later, and to just go with an even heavier carbine length buffer, of which i've found a few. As a side note for anyone looking at a PSA stainless .308 barrel, accuracy has ranged from acceptable (for combat) to excellent, depending on which factory load i've shot, & probably a bit of natural barrel break-in. So far: Winchester 7.62×51 NATO M80 ball has consistently shot the worst, but at 2.5" - 2" at 100 yards, it hasn't been bad, considering what it is. Its just not a consistent load and its not expected to be. IMI 7.62×51 NATO M80 ball started off shooting about 2" on average, seemingly a bit more consistent than the Winchester, but today I shot several groups that were hovering around an inch and a half at 100 yards. This is probably the ammo i'd recommend to ya'll for an SHTF stash, as it is quite affordable for AR10's, shoots pretty consistently, and it has sealed primers. I've also shot Federal Premium 168 grain .308 Sierra Matchking ammo and got a clean 1 MOA group and several that were under 1.5 inches. So it is definitely a good shooter and the PSA stainless AR10 barrels don't seem overly picky about ammo, as i've heard & been reading about for a while now from a lot of others too. Optic has been a 1-8 Primary arms SLx first focal plane. Not ideal for super tight groups but not bad either. It is definitely on the heavier end of the spectrum for AR10's though, so I went ahead and put a bipod on it too 😂 but if I do another AR10 build and I don't just get an SFAR, I do plan to use probably a Faxon gunner profile 13.9" .308 barrel (under 30 ounces?) plus the usual Aero upper/lower, and one of the 12.7" lightweight Aero handguards (if they ever come back in stock) for more of a lighter "battle rifle" application. Just a sling and a red dot or microprism 1x with a QD magnifier, so I can take that extra weight off the gun quickly if I choose to.

Why mention an A5 tube and not just give the info about it. Would have taken as much time. They are very common.

That is a ar 308 not ar10 there is a difference