While I'm running ProPresenter, OBS and the Atem Control Software on the same computer for this demonstration, I DO NOT recommend doing this in an actual production environment. Run ProP and OBS on separate computers. You'll probably be fine running the ATEM Control Software along side either of those.

Thank you so much for this. As a beginner into all this, I was able to get my hands on one of the firsts ATEM mini pro in Sweden. I have since then spent more time than my kids on youtube trying to learn how to do all this. And still, no one can explain this the way you do it. Thank you so much. And every day I have hoped for the release of the fourth version and today it was there.

Our church streams are about to be on a whole new level!! Thank you and God bless you!!

Great video! I am helping our church to start a media ministry and your channel has been a huge help to get us there with all the instructional videos you put out. Thank you and God bless you!

Came here after the audio management video for the atem mini, never thought about overlaying lyrics on top of video, always just switched to an alternate input running powerpoint. Going to give this a try before my next conference. Awesome content man.

Thank you Steven for your time and dedication! Great teaching. God bless!

You do an outstanding job explaining what is needed. Thank you so much.

Last time I watched your video, I was still waiting for my Atem. Now, I got it and already streamed several events. Nice thing! Thank you very much for your videos!

Hello Mr Steve. I just discovered your channel and what a genius. Your explanation of the Atem Mini is so knowledgeable. Thank you and God bless you for sharing your knowledge

New subscriber- thank you for being so concise and thorough when explaining! You are awesome!

Best tutorial and explanation on KZfaq. Really helpful video to mastering the Keying in ATEM Mini. Thank you very much!

Purely awesome tutorial and explanation!

Thx again Steven! ❤️ I‘ve learned a lot again. Greets from Germany, Philipp

Great video! So helpful. Thanks for putting this together!

Thank you for this tutorial. Very insightful!

A very clear description. Thanks.

The information in this video is appreciated. Thank you kindly

Clear & concise. Thank you for sharing! Keep up the great work. You are a blessing!

This is awesome, the end of weeks struggling with lyrics on streamyard, thank you!

Best explanation I’ve seen on KZfaq...especially if you are using pro7 like me..thanks

Great video Stephen, always learn a lot from your content

I could hug you! This is awesome

You just changed the game for me. Thank you !

Much appreciate the effort you put in! Thanks!

Great video! Thanks for your hard work.

Awesome content! Thank you for all that you do! Blessings!

Thanks very much for this video! I have been looking for this for ages. This answers my questions. I will be setting this up for my church using Worship Extreme

very helpful, I appreciate you taking the time to make the video :)

great how to video , thank you so much

Actually understood that that! Thank you so much 😊

Great work in your videos. You are very good.

Best explanation! Thanks.

this is by the far the best explanation of exactly what i needed on all of youtube

Hello sir, I really glad that I´ve seen your videos and I knew that God used you for His glory to work with. I thank God so much when I met you here. At our church we would like to do that but we have not so much fund for that. So we pray for that if God give us to do that as soon as possible. Thanks so much.

He has returned

Great job! thanks a lot!

Super helpful, thanks!

thanks . Great video

Thank you so much!

Very good! Thank you!

I appreciate your Video where I am trying to do

Thank's for sharing

Thank you.

Great thanks

Awesome Video✌🏽✌🏽✌🏽✌🏽🙏🏼

thanks a lot

And now the ATEM Mini Pro has programmable audio delay on the mic inputs! Yey!

Thanks

Great video, I just wish I could find a ATEM Mini. It looks like there might be some online, but I just don't want to buy something and wait two months for it...

Hi Steven! Great video as usual! could you please explain the advantaged of the Propresenter over a simple app like keynote or powerpoint to prepare my lower thirds and lyrics? It is not that clear to me why propresenter is better that the other options really available on practically any MAC or PC. Could you explain it a little more? Thank you

Can you do a short video about overlay using Powerpoint? I know a lot of small church using PPT and can afford to switch to ProPresenter (cost and re-train staff). Thanks

Thank you for this video, I wanted to know if you can recommend a camera that works well with low lighting and also good for long distances.

can you add multiple mask in that video switcher?

Hey Steven. Thanks for the video. Quick question for you. If we're switching between lower thirds and pulling the full projector image (eg, a video being shown to the church, or the pastor using a power point) In the event we don't want it to be in the lower thirds anymore, would we need to set up another 'output' from ProPresenter and have a switch going into the 4th plugin on the Mini? Assuming the other 3 inputs are being used for cameras?

Can we see a tutorial on using the atem mini with wire cast one software

Woww..sir Im looking to buy atem mini pro for live streaming some record programs..it's enough for purposes? And can you please suggest good laptop or laptop spec for connect with atem mini pro

Can i use this to our system to broadcast on cable system of ys

One snag I ran into was that I couldn't get any input from any PC into the ATEM. I had to go into a windows advanced super nitty gritty display properties menu and then change my output settings to the correct framerate etc to get the feed to show up, per a different tutorial video. Might be worth mentioning.

Is it Blackmagic ATEM mini support for 4k camera...

My ATEM mini is not being recognized by Camtasia 2020 or OBS. the screen looks blank The webcam and Blackmagic show up as options. The 920E works fine, but eh aTem Mimi is blank. I have called Blackmagic they say call OBS or Camtasia Camera Sony Handycam cx455 Nikon D750. Any suggestions?

How does it work for animated graphics like title of message or intro logo?

So appreciate your videos! They are a big help for us setting up our livestreaming in church. is it possible to this using NDI instead of HDMI port?

can this be done in version 6?

This is super helpful. Thank you! Assuming this same technique works with the Atem TV HD?

Hi Stephen, I have a camera connected with an hdmi cable that works only on input 1. But i need it on input 3. the same set up doesn't work on input 2 or 3. 4 is already designated for L3's. The cable length if 40 ft. Thanks

Hello sir, do you think it would be possible for me to stream a simple audio visualizer instead of lyrics using the luma keying option?

Looking for a low cost camera option for the Atem Mini Pro switcher. Do you have any suggestions? We plan to mount 3 cameras. We don’t have the budget yet to buy a camera that we can control the zoom.

Steven thank you for your video. I got my atem mini and a MacBook pro. What is the best way to record the video utilizing atem mini to my computer without losing resolution? I tried OBS but i lose a lot of resolution compared to when the video is recorded straight into my camera. Your video looks really nice, how did you recorded?

When I do the Chroma Key, the hardware buttons do not change the cameras, it just switches lyrics between preview and live/onair.

Sir Ji this product is not avilabel above amazon inside india. can you couriered this product inside our india. what in ple

hello sir i want to ask how to set atem mini pro and easyworship for live streaming but the live streaming only uses atem mini pro not using obs please help me sir i really need your help sir thank you sir god bless you sir

How do you connect your lyrics and video showing together on obs I thought you used different capture, so how did you mix the two together from your obs or from your ATEM mini ?????

Love your videos man! You explain everything so well! I do have a question regarding the ATEM Mini that I can’t seem to find the answer to anywhere. If we had an ATEM Mini Prowith 2 cameras and our pc using 3 of the inputs, can I use the 4th input to daisy chain an ATEM Mini and add 4 cameras to that? The way I’m thinking....the camera selected on the secondary mini will show on the livestream when the 4th input is selected on the main mini pro. Hope you get what I’m thinking.

thanks for this video, which is helpful for the initial selection and set up for the options (luma, chroma and mask). But, during a service, how do you set up for the numerous “slides” for the lyrics? For example, for the opening/welcoming song, there could be a refrain plus three verses. So how to switch from verse 1 to refrain, verse 2 then back to to refrain, etc., while possibly switching camera angles as well? Thanks in advance!

Good day sir, thanks a lot for your videos and explanations, they are life saver...Please, could you instruct me on how to make my lower third design transparent or how do reduce the opacity of the lower third image design. I have designed lower third image that my lyrics will lay on. I am using easy worship and the Atem mini to stream directly on Facebook. Note I am not using OBS because i could not get the video and audio to sync, so i am streaming to Facebook directly without any software in between...Thanks for your help. Eddy/the Netherlands

ive decided the best way to do this is to run the atem output through a computer with ProPresenter and let ProP do the streaming. Can either use the atem as a web cam or you can use atems hdmi out into computers hdmi caputure so you can still use the ISO recording on the atem’s usb c port. No keying required. With ProP at the centre of operations you got a lot more power and you dont need to deal with ATEM’s awkward clunkiness. I dont have an atem extreme yet but that is the goal. then i will use Mix Effects to use it’s super source capabilities with ease (came out long after this video was made). Im assuming pro presenter didnt have streaming at the time this video came out.

Hi there. I’m using the software called Proclaim. How can I create a graphic with alpha channel and gray to create a linear key out of Proclaim. I’m trying to make a transparent lower third. Is it possible with my computer and software to create a linear key using atem extreme?

Very informative video. We used our for the first time Sunday. We had issues. Has the audio sync video come out yet?? I noticed Sunday that our video and audio did not line up well at all. We tried syphoning our lyrics from Pro 7. The syphon and audio lined up perfectly, but the video lagged behind. I am not sure how to fix this really. I plan to try NDI tomorrow. If that doesn't work, I will go will the settings mentioned in this video. I also found a few features that could help lessen the workload on our iMac to hopefully help the lag. With that said, our youth ministry uses OBS Streamlabs and the ATEM, and it is synced up well. They do not send lyrics though. Any ideas on what the issue might be? Do you think we overloaded the cpu running pro 7 and obs causing the video to lag? Do you recommend NDI? We have the ATEM mini pro

I get down a bit of a rabbit hole when trying to decide a computer to purchase that could do this. I'm not overly tech when it comes to the computer portion. We have the atem mini pro up and running and would like to add lyrics. What are the specs of your laptop?

Thanks for this video. Just to be clear, this is only for production at the venue. If you wanted to live stream all of this, what would you do?

Hello and thank for your very well explained videos. Would you happen to know if this lyric presentation will work with Proclaim? Our church uses Proclaim since it does have the ability to set up volunteer users with ID’s, so they can log in from home to set up each service. Since most of our volunteers are young and dont drive and have to wait for parents or some adults get out work late. I dont know if Propresenter has that feature yet. Thank in advance.

Options without propresenter?

When using the Upstream Key, will the lyrics stay on even when I switch video angles (using multiple cameras)?

These videos have been so helpful in upgrading our video content on a budget. Thanks for that! Our soundboard, cameras, and media computer are all in the sanctuary, but currently our recording and live stream PCs are in another building. My thought was to get the Atem Mini Pro set up in the sanctuary and have our producer just control the Atem from the other buildign using the software. But as I've found out, the issue here is that the producer doesn't have access to the multiview monitor (since I can't send the HDMI out signal that far). Do you know of any solutions aside from something like a HDMI to fiber converter to send the HDMI out signal a fair distance? Am I just missing something easy within the Atem Mini Pro?

My pro presenter doesn’t recognize my ATEM mini any ideas?

Can you use the upstream and down stream simultaneously for a logo and lower third?

Thank you for all of your informative videos! What would you recommend to do this with Pro6?

When I'm putting the lyrics in an overlay using either luma or chroma key the lyrics go away every time I switch the cameras. if I hit that camera button again they come back, but this leaves a flash at best. This is annoying because I don't want to be stuck to one camera shot during praise time. Is there a way to get it to leave the lyric overlay up, regardless of what I do with the main cameras until I turn it off? I'm using an ATEM mini Extreme.

Can I use Mediashout6 with OBS and the Atem mini to make Lower thirds? If so, please help!

We are using the Chroma Key option, but in Pro Presenter, when you click the clear slide button, the screen will go completely black. You will only see the video underlying, if you have text on your slide. In between songs, the tech clears the slide lyrics, and then all we get is a black video on the feed. Do I need to have the Video Input option turned on, in the Looks panel? I only have the slide option selected.

can we run with alpha key?

Any help... We have Atem television studio (not the HD) and Pro Presenteter 6 and doesn't work for us, are we doing something wrong? Thank you

When running lyrics from pro presenter and switching between cameras, the lyrics disappear as soon as I switch, how can I fix that?

So I know this may be a dumb question. So we have an atem studio 4k. We run four cameras via sdi in and then run a dedicated out on our mac studio to it as well. I get how to do the lower thirds for lyrics but what about after the worship through music and the pastor has a powerpoint that has been imported into pro presenter how would that get handled.

Hello, is this tutorial valid also for propresnter V6? Tahnks!

Wait, My laptop have both vga and HDMI outputs but they output the same content. How did you make your laptop output separate outputs?? 4:07

Is it possible to have lower two third shown on multiple video with only 1 upstream key ? Cam 1 - Video Cam 2 - Video Cam 3 - Video Cam 4 - ProPresenter lower 2/3

Hello, I am having trouble with my multi camera setup. I have set up my ATEM mini as you have it in this video and everything works fine until i go to change cameras. when i change cameras the lower thirds dissapear and we have to hit the "ON AIR" button on the right to get the lower third lyrics to come back. do you have any ideas on what could be causing this?

Thanks for sharing Brother Steven. What are your thoughts on the Yolo box vs the Atem Mini? Are there advantages with one over the other?

Not tying to overlay lyrics, I just want to screen mirror. We have a Mac connected to a 2 way splitter. One side to a projector, the other side to a stage monitor. That all works fine. The stage monitor is no longer needed I unplugged the HDMI cable from it and plugged it into Cam 4 slot on the mini pro. This however did not work, any idea why not?