Special edition coming to ep. 100?🥳 I was just wondering about the SDI camera control but the distribution box explained that. Great video, keep going! 🤩

I have a 2/me as well, and the Atem ISO SDI is a perfect solution for multirecording (5 channels !). For this price you 'll never find 5 recorders ! thanks for the awesome video as usual ;-)

Is there a latency difference between the HDMI and the SDI version?

Great overview! I’ve been watching some of your videos as I’ve been trying to understand the products to make a purchase of what I need. I’ll probably still go with the atem mini extreme iso. As you said if you have an sdi monitor situation it’s better than reconverting everything. We plan on having 2 studio 4k pros (I might run Sdi and stick two boxes directional converters on it) and 1 bmpcc 6k w/ teradek ace 500. Outside of that equipment, I was considering getting the power focus and zoom w the 2 of 4 lenses I’ve learned only work with this work flow as I am working with less experienced operators. (I can pull and rack focus/zoom live all day if it were me ) Is there anything you can think of that I would still need in this workflow?

Maybe I can ask you, I have big problems with Atem Extreme iso SDI device. We have now made about 10 streams with the device. Every time some of the cameras start stuttering, the picture goes black. We have changed the wires, disconnected the mains power, xlr cables, etc. I have tested the SDI cables by recording with the same camera, the same cable, with the same settings for the Atomos recorder for 5-6 hours without stuttering. In the device, the image goes black only in the input connectors, not in the output. The broadcast can work normally for an hour and after that some of the cameras start to go black. Blackmagic support says that this is the first case, the only thing I've found out is that I should make the camera and input connection with the ReClock function.

Hi, thanks for the video. One quick question about the SDI version. Is channel one still set for YUV color output for gaming? Thanks!

So you can use the two outputs for multi view and program? 1 being preview and the other being multi view..

Can you use the video hub software for routing the outputs? Also can you assign the multi view to any output?

Great video and thank you for showing about the camera control. Question. Are you sacrificing that output solely for camera control? Or can you split to get a monitor view or something?

What mic arm is it?

I wonder what the market is for these complete sdi versions. I think a combined version might have been better but maybe there is a hardware cost reason they did not combine. That said sdi is more reliable then hdmi. If not the connection signal then for sure the durance of the connector. Hdmi is a fragile connector. If priced the same I might have chosen the sdi extreme version if I had not upgraded yet. Because I already have the extreme iso hdmi version, I'll stick to that. Currently I convert 2 of 8 hdmi in ports to sdi, probebly going to 3 of 8 ports in the neat future. I think the hyperdeck shuttle is already way too expensive for what it can do. I wonder if they sell a lot of them. My guess is that the shuttle will be replaced with something completely different and that a sdi version will not happen of this current shuttle.

And we still can’t get an extreme iso in a rack version…. I wish it had the ability to jam sync timecode just like the pocket cinema cameras also. That would be a massive time saver!

If SDI output 2 is set to multiview in the software control, will the switcher remember that setting and maintain that assignment upon the next start up? I'm trying to price and set up a system for a client, they want to avoid using the software control if at all possible. Hope someone can answer. Thanks!

by the way, I know you've already mentioned it but I'm unable to find it. Can you give me the name of the software you use for all your schematics ? thanks ;-)

You say it has 5-channel recording "built in," and that it's a "multi-channel recorder," but there's no media slot that I can see. I'm assuming you have to use the USB disk output to record to an external SSD... but do you need a special SSD to record all 5 streams at one time without ever dropping frames? That seems super sketch to me... not sure I would want to trust an entire production to that.

SDI is great but buying this one now would most probably not be wise. At the rate Blackmagic upgrades this will be replace with a 4K switch shortly. So I will hang in there with my HDMI extreme for now.

oh just i wish there is one hdmi at least for input from laptops

HDMI fiber in the correct direction, HA! A lifetime ago I ran 1500 feet of Triax the wrong way. lesson learned.

Hi. Help, help, help, help... I have a monitor with SDI input and output. How can I use it with an Aten MiNI HDMI?

Cool video, you have to subscribe right away

Multivi set karo

What program do you use for your wiring diagrams?

Introducing the Atem SDI... "Connect your Studio 4K Pro, and record in 1080p" 🤣

Hi. Help, help, help, help... I have a monitor with SDI input and output. How can I use it with an Aten MiNI HDMI?

Hi. Help, help, help, help... I have a monitor with SDI input and output. How can I use it with an Aten MiNI HDMI?