You’re welcome to stay with us in Poland and let’s go drifting ❤️

Right after Brian said wipe his butt the KZfaq video went to an ad for charming toilet paper KZfaq's getting good real good

The moment brian said we need him to film them wiping their butts i got a charmin toilet paper ad loooooool

First Hoonigan this vs that now Jimmy. Such a good morning.

If you plan on keeping the stock cluster, keep the electronic side of the ABS, throw away just the hydraulic part. If you don't have rear speed sensors, you can repin the connector and put the front signal wires where the rear would be, that way you can have speed and mileage on your cluster, no matter what rear end you running.

Hit up nightride in poland jimmy if you want to drift there lol

OAKES GARAGE x NEXT LEVEL DRIFT bois?

Derrick is now my favorite because he rides a two stroke. Damn I didn’t know y’all rode dirt bikes so much!

You could try C5 or C6 exhaust manifolds. They’re built for tight spaces and have a slightly longer collector

Dj actually had a good point with that question of the day... I’m proud of his stoned ass haha 😂

i swear Jimmy always be putting out fire content on this channel!! useful information, sick builds, and so much knowledge when it comes to automotive !!! makes me feel like im back in autotech class in highschool 20 years ago lol

Yoo jimmy I love the videos been watching for a year now. Love all your cars. Love too see what else is coming up

Yessir I’m 17 and I bought a hatch s13 and I been working on it I have watched all your vids and try to keep up I’m a big fan and I live your channel but I hope it grows more you deserve more views tbh but keep it up and hopefully you read this it would mean a lot!

That's the exact oil pan I have on my ls swapped 89 camaro drift build,keep up the good work guys!!!

I love these channel .. they be putting in work . I've learned a lot just watching looks like they have so much fun . .

I’m all in, on my 5th e46, so what y’all are doing is my next step!

Always wanted an LS e 46. Can't wait to see Brian ripping it

Looking forward to seeing this! Wrapping up my swap definitely way under the budget you guys have going to this so far lol.

Love me some B Hall content. Always gets a laugh outta me. Solid dude.

This video was extremely helpful I'm wanting to do the same thing to my e46, thank you!

Thank you! I was just thinking of doing this with my 4.8 and s2000

So stoked for Brian!

Sachs peformance clutches are the best! my clutch was rated at 400NM+ still holding strong after a year of 520NM

Come to next level! Best grassroots event here

Been waiting all morning

I always have to stay and watch until the end of the video. The outro song is just too good!!

Brain stepping up his game on his builds- nice one bud

I AM BEYOND EXCITED ABOUT THIS!!!

In Europe we would use 330D gearbox they are ''the strongest''

Been waiting on my TDR mounts since April 2nd😩 Go Brian GOOO!!! So happy for you Maybe one day we can have a LS46 meetup 🥺

Sweet looks good can't wait to see it rip

So much damn motivation for me to start mine!! 🙌

This really look great, I would do anything to swap my E46 with an LS but to get an LS in South Africa is like chicken teeth and hell off expensive. can't wait to see this swap done. great content.

This one was seriously awesome guys. 🤌🏻

Learned a lot from this Thanks!

I just ordered this because of yal doing LS swapped 240 with this swap just like the black one on the background

Sheesh! If you wanna come to Poland I have a space to have you! You inspired me to start my channel and would love to meet you and hang out 💪❤️

Forward facing headers are gonna suck for the serpentine belt routing but it's so worth it. I hid a whole muffler in my front bumper so I could dump exhaust put the side of the front bumper.

🇵🇱Greetings from Poland!🇵🇱 I am here since budget 240. Love the content! ❤️ Keep up good job 🤟

Poland here comes Jimmy!!!! So cool this is happening

Love me some ls content and can’t wait to see Brian’s face when he getting his head glued to his head rest for the first time lol

Shout out from Tennessee

Fire video as always. Love the random stop ins. B-hall that beast will shred plenty of tire. It will be funny watching it do it if you make it quiet for now 🤣

Such a great excecution of "Noice" Noice guys. Great work Jimmy, Brian and the crew.

We’re live Oak boys!

This thing is going to be awesome

TDR is “Tire Death Racing” I used the same adapter and engine mounts on my 46

That thing is gonna be a beast!

That adapter is genius!

Looks great.👍

Can't wait to see Brian start it in the car and go for a spin

Damn! Thank you for making this video. I’ve been looking for a video for this set up! Now I just have to figure out if the 6speed zf can handle the ls!

Love e46 content!

Front plate the motor in so easy and works awesome

Finally more progress for the junkyard LS

The zf trans is a nice transmission

Taylor Ray ran G8 GT manifolds on his 6.2 with stock heads and made mid 400s rwhp. Maybe hit him up to see if he still has them. They fit a miata so maybe they will fit a bmw. He did pick up significant power with longtubes.

Damn, come to Poland for Next Level Drift guys!

The zf trans from the e39 530d can take e beating and hold alot of tourqe. We use it alot here in norway👌👌

Derrick's smile when he got to palm kr haha epic keep up the vibes ps good to see Grit Sanderson 🙏🏾🤘🏾✌🏾🤙🏾

Sending up thoughts and prayers for that clutch.😆

Forward facing manifold and a big turbocharger

Good morning ☀️

Ooooh nighride invite get on it boys 👌🔥🔥🔥🔥🔥

I completely forgot about this transmission, now I know what I'm going to use in my IS300

Speed engineering headers dude

VW Golf’s, BMW’s & Audis are the Polish trifecta

I order the same motor mounts lol like 3 or 4 montha ago. I'm still waiting on mine. And for clutch I went with act disc and spec pressure plate from the boys at drift hq which should be good for 600 crank. So if you guys burn through that clutch it's a good opinion

Has anyone else learned so much about cars just from watching Jimmy because I certainly have😂

Thank you brain for repping the e46

Derek hit the nail on the head about LS swaps nickel and diming you the entire time. Don't blame you at all for using the factory manifolds. Had exhaust not been the first thing I ordered for mine I'd probably have gone factory too.

@nightride 💪 perfect quality videos 😎👌

Making moves Brian

I wish I could do the stuff you guys do

Ask hurt if he can get u connected to Don Musk! That name should be familiar 😅 the people over there are like the most hospitably and friendly

Fun fact: polish people are fantastic machinists. But you learned that from quality of that piece.

My car's transmission was made by GM of France, however. With a couple nice modifications. Sequential shifting capability that actually worked. The transmission is Good for 300 HP, so if you are using a GM transmission it should fit to a chevy engine. Same transmission used in a Cadillac DTS or Deville, or full size C or K trucks at the time. Really good solid auto transmission that came with 2nd generation 3 series BMW. 3 speed with overdrive, that was also geared quite well I thought. Especially the overdrive gear I thought was especially good.But I'd imagine a manual would be the best if it can handle the HP.

Im frrom poland, our bimmer scene is stronk af boi

Motivation to build my 5.3 sitting on an engine stand :D

I feel like I have seen Jimmy put a million throughout bearings on BMW gearboxes at this point 😅 Now when I am finally able to afford a K swap for Miata I will be well able to through a Bmw gearbox on it!!

you need a heavy duty rear end in order to hold that power. M3 or SLG axles.

Also from Poland come out see the scene !

I've been planning my own v8 swap for years but couldn't afford it. 3uz swap can't wait to have the engine imported

Ooooo hell yeah man you should visit Poland for sureeeee, drift culture in on poooint!!!!

I heard that “pause” keep gunnin jimmy

slotted mounts is insane

The aggravation tht was on Brian's face about the backorder on headers was felt from the heavens and then some 🤣🤣😂

“So we can prep the engine bay in preparation” Ole JO preaching out here 😂😂😂

4th yh both about time Brian needs to get his car going again

FINALLY SOMEONE WHO KNOWS OVEN CLEANER IS IT!

Get some of the Holley cast exhaust manifolds with v bands to give you some room they’re cheaper and should fit nice

You guys already know that you are welcome in Poland,you know who Donmusk is and all that stuff,would be crazy to see you on our tracks :d

Headers for that car with the space is a nightmare bhall!!!!! That thing will rip plenty with stock ramhorns!!!! Block huggers would help but you still would have to clearance somewhere.. she looks awesome dude

the euro 328/m3 (s5d 320z) gearbox did blow out the bottomstock att 1108 wnm in hub dyno. so the small ZF gearbox is great for Big Power.

Can't wait to hear how " BFD" sounds loping in that BMW

The biggest deal with the headers won't be power. It's going to back pressure. Back pressure leads to more heat under hood. I'd plan to add vents for heat management or at least help with getting heat out.

I've got a ton of family in poland and my cousins got the drift bimmers :P

I had an unsprung expensive clutch disk in my E36 328is NA build and I would have to spin the tires just to get the car to move from a stop, there was no soft engagement and the clutch disk only lasted 38k miles 😆, next clutch was a heavy duty sprung 6 puck ACT and it was 100x better and less stressful to drive.

What a good morning

Clutch slip will probably be the only thing preventing that gear box going bang😂, can't wait to see this