Attempting to start the engine with new fuel pump
Рет қаралды 169
23 күн бұрын
@joshdye1684 16 күн бұрын
I have to run those AVS2 carbs at just about one turn open only on your air fuel! They seem to flood bad.
@RedneckMechanicTurningWrenches 16 күн бұрын
@@joshdye1684 I’ll give this a try thank you for the tips
@joshdye1684 16 күн бұрын
@@RedneckMechanicTurningWrenches absolutely! I several of the exact same set ups, and have fought the exact same issues. Adjust your throttle screw down, and choke down your air fuel
@josephadams7106 19 күн бұрын
Pour a little fuel down the carb and try to start it. Sometimes, when you change the fuel pump, you need to prime it. This is how you do it. Cranking rpm may not be enough to get the fuel up to the carb. Was the timing off before you changed the pump?!
@RedneckMechanicTurningWrenches 19 күн бұрын
@@josephadams7106 No the timing should be close. I’ll have to use my timing light once it gets started though
@RedneckMechanicTurningWrenches 16 күн бұрын
@@josephadams7106 I just reread your comment and I’ll try adding fuel to prime the pump this time
@joshdye1684 16 күн бұрын
Is your vacuum advance on your carb plugged off? Could be a vacuum leak. Or try unplugging your electric choke
@RedneckMechanicTurningWrenches 16 күн бұрын
@@joshdye1684 if adding fuel to the carb don’t work I’ll try this to see if the electric choke is working
CacaMechanic
Рет қаралды 45 М.