Words to live by: "Thats slightly unprofessional, but not unacceptable" - Andrew Camarata

When Andrew says something needs to be “Fixed immediately”, you definitely know something has to be fixed 🤣

This is the roots to his channel. Repairing , fixing equipment and his building. This to me is what we have been missing lately. Keep it going and the content up

Hey, Andrew. I know you always want things done correctly. The voltage at the alternator should be at or a couple tenths + or - of 14 volts. Your voltage to the battery with the engine running should be within .5 volts of the alternator reading. If not, you have connection/wire problems. No way that amount of voltage drop is normal or acceptable. Dirty/corroded electrical connections, especially at the ground points will cause endless headaches. I recommend ScannerDanner's channel. He has good videos on dropped voltages due to corroded connections.

14:12 " That's slightly unprofessional but not unacceptable " Perfectly sums up about 65% of the repairs I've done in the bush . Gotta use that line now .

Better then anything on tv , thank you for all the effort you put in dude .

For the gas drip out the overflow line, check that the tiny spring loaded plunger that is on one end of the needle valve. Make sure that it's still there and that it works properly ----- The float shuts off the flow from the tank when the float rises with the bowl level and moves the rubber end of the needle into it's seat...if the the tiny spring doesn't return the plunger to full extension or if it's missing, bent or is stuck while depressed in the needle it will allow the bowl level to rise too far, thus the excess gas flows out the overflow line.

"Slightly unprofessional but not unacceptable." Another gem from Andrew. Love it!

Thanks Andrew for the great content. Any day with Andrew in it is a better day! 😁

Andrew, I have watched a lot of your videos and man, there is nothing you can't repair or replace in your stock pile of equipment. You have the principle of the Marine Corp, adapt and overcome and you do that well.

So, this weekend I rented a very small 2000lb excavator to dig some trenches for drain pipes. Operating these machines is way more difficult than it looks. Andrew makes it look easy and I got to say I have even more respect for him now. Just being able to load and unload these things is an achievement. This guy deserves every ounce of success he has coming. Btw, I got my drain pipes buried and it seems to work perfectly when it rains. Love this channel so much.

I always learn stuff from Andrew’s excellent videos. Today I learned that “WD-40” is a verb.

I like the way you secured the battery, looks professional enough to me! 👍

Hello! 🙂 The carburetor float valves sometimes have a little rubber tip on them and that ethanol fuel can degrade it and make it useless. It is best to replace it and the seat that goes with it. Use non ethanol gas after that.

The girl you are working with is really good. She fits right in with you on the job and actually helps out and has ideas.

As a retired plumber/pipefitter/refrigeration mechanic, I appreciate your approach to problem solving.!

Those magnetic parts trays are one of the best tools I have bought in a long time. You can stick them on a vertical surface and the parts stay inside (the metal parts that is). I found a set of 3"x3", 6"x6" and 3"x9" for $10 at Harbor Freight. I bought four sets. I have them everywhere.

It would be awesome to have another video maybe you and the dogs or jet skiing or anything. You spoiled us with several videos a week. Not blaming you. You’re just very interesting and it takes our minds off of this crazy world we’re living in.

You have rock easily broken up, beautiful streams of water to harness water, electricity, pond for fish to harvest, for watering a garden and a greenhouse and a swim in hole. Trees the perfect size and lots of different hardwoods to mill, for log houses, lumber, firewood, posts, fuel for syngas. It all can be consumed. I wish I owned a square mile with a mountain in the middle, the Hudson bordering. Valleys for grass for cows, horses , pigs. Enough timber to sell, harvest for cabins buildings, for fuel. A big ole stream of water year round flowing down with waterfalls. Wow hillbilly heaven I’d say and near Woodstock .

Blue is growing up sooo fast...he is no longer an awkward puppy, growing into a beautiful dog, can't wait to see him running circles around Cody

You've got some pretty lucky dogs working with you. It was hilarious seeing Cody come in focus under that machine.

For the electrical contacts, especially in that under-dash area, it would be advisable to use dielectric grease to prevent future corrosion. But I have to say, you do great work...

😢 we need a our fix. Looking forward to the next video hope things are good

beautiful scenery...I love your approach to fixing something instead of tossing it. Cute pups!

I’m glad to see you have an awesome helper to keep you in line on your projects. She sure doesn’t back down from any job. The world would be a much better place filled with more Andrews and his helper.

Great vid brother… looks like your radiator was smoking a lil at the end there would have been cool to see a repair on it to 😊 keep up the good work!

That's a huge amount of effort you put in for all the shots and close ups. No way I'd have the patience to do that. Awesome work.

Great video, Andrew! Gentlemen workers before me advised the best time to lube any machine was just after you finished your work. The joints are warm and take grease much easier. That also means the next time you use it, you already know the machine is greased and it's one less thing on your prep list. The young lady certainly knows how to operate that tracked dump unit. Always glad to see another video from you!

I don't know if you've noticed, but in the past when you would speed up your film and take your piece of equipment back and forth and back and forth over and over and over you can actually see the road surface start to sink in slowly and how you are sculpting the land with a 10 ton machine. I wish someone would splice together a bunch of your examples of that....I don't know how to. Great video as usual and greetings from Texas...John B

Your stubbornness to do everything possible to find a problem is wonderful

From a guy that has an office job and hasn’t spent even 30 seconds inside any heavy machinery / thank you for these videos I’m sure curious and love watching the work 💪

It's funny, when watching the 'I bought a mountain' video, it crossed my mind how many trees you were cutting down. This comes from a New Englander who has no really problem in doing so, but there was something in me that, for some reason, had a reaction to it. That opening drone shot just shows how it's only a drop in a bucket. Reminds me when my grandpa told me that in the 1700s it was 90% farm land and 10% trees but now it's flipped. Truly awe inspiring seeing the vast sea of green your surrounded by, and that you could double the trees you've cut and it'd still be twice nothing haha.

Glad to see the D4 back to work. That machine is what brought me to your channel.

You are a great role model. I appreciate you. Thank you for sharing your skills knowledge and experience

Blue's getting bigger, beautiful coat !

How cute! Blue has learned from Cody how to run alongside you as you drive whatever machine you’re driving. He’s growing up fast!

Great video Andrew, you should do an equipment tour, as well as a tour of the castle.

Thanks for another great video Andrew ! I just have to point something out to the ppl that have already watched this video....hitting the LIKE button only takes a second or two of your time and not only does it help Andrew put out more content but IMHO it also is a way of saying thank you to Andrew for filming, editing and posting these videos for all of us to enjoy. I don't know about everyone else but these videos are a huge source of entertainment for me and I thoroughly enjoy them. So thanks Andrew and come on peeps....Give this guy a like if you can. At this point there are over 4500 views and only about 750 likes. Say thanks to this good man. Peace to Everyone and Cheers Andrew.

I'm with you on performance mufflers! Quads and SxS's are loud enough as it is and yet people want to make them louder. I actually want a quieter muffler for my RZR xp1000.

The crowd cheers!!! Andrew, Andrew, Andrew, Andrew, Andrew....it was so loud I could not sleep! I tried to calm them and tell them I would cast live..... they cheered again even louder!!!! Go to sleep, go to sleep, go to sleep....

I've taken apart Mikuni carbs dozens of times for this very same issue. Many times the needle seat is bad or the float starts to swell over time and there so little clearance between the float and the bowl housing that it just catches and doesn't allow the seat to fully nest and shut off the fuel.

Settling down for the evening and I see at the top of this video it’s labeled as #15 on trending. I couldn’t be happier for you and your success Andrew! I’ve been here for a long time and your videos have stayed true to your original style. Love to see it!

When I have a nasty job to do under a vehicle, I always clean it first to keep the dirt from falling in my eyes. However, I only have 1% of Mr. Camarata's talent!

"Slightly unprofessional, but not unacceptable", sounds like the Motto of this channel! Love it!

#14 on trending as of this morning. You dropped this yesterday but I didn’t have time to watch. I will now. Congrats. #14 on all of you tube. That’s something to be proud of.

Hard to beat watching Andrew on a dozer. Great video!

You remind me of my dad who could fix anything and everything, only you're half my age. I love seeing the dogs in the videos. It wouldn't be the same without them. Thanks for sharing.

Another great video. The intro with the drone coming in and zeroing in on the pups is fantastic. Always enjoy watching you repair equipment.

A great mix of scenery to start- looking forward to the show! 😀

I’m never disappointed with a video from Andrew. Love the work disposition, easy going nature, and the puppies!

Andrew, your repairs passed a full Lab inspection. Congratulations! Cody and Bleu are getting big.

That view of your mountain retreat and the hills around it never gets old Andrew your a hard working and lucky lad. I see that you’ve been acquiring some new to you equipment, the tracked loader and the JD forwarder hopefully more videos to come 🤞🏻👍🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿

Good to know how to repair small to big engines Andrew saves slot of money in the long run. You have a wide variety of vehicles to maintain in your fleet. Some older ones. Keep up with your great videos Andrew, love to see Cody and Blue with you all the time. Miss the chance on getting a Levi Memorial. If you still have any left I'll be able to buy one..

You camera work and production value is amazing and well done. It's your second calling, Andrew. I enjoy all of your videos even though I only know where to put gas into my car and windshield fluid and not really an interest in knowing more. But you make mechanic work look fun because you passion shines through! Thank you for all you do!

Thank you Andrew for another great video always enjoy watching you work and your puppies too

I saw 32:05 minutes on the time stamp when I started to watch the video, thinking that's a long video. When 32:05 rolled around, it was like. Wait, what, that can be the end of the video, it went so fast. Thanks Andrew love your videos!

Looks like you got a good set of extra hands, driver , cameraman . Not afraid of getting their hands dirty .

Hi Andrew my wife and I really enjoy your videos. The Honda i have one similar to yours and it was dumping gas. cleaned the carb and still leaked replaced needle still dripped. Went to Honda they told me to get some scotch brite and a pencil shine up the seat and no more leak. Glad to see you using anti seize on the threads of bolts and blaster to loosen. I buy WD 40 and Blaster by the gallon with the spray bottle. You work hard be careful with your body jumping of the equipment it will catch up with you I know. If i knew i was going to last this long i would have been a little easier on my body, arms back knees ect. Beautiful country in your videos!!!

Opening drone shot and pan were worth the price of admission alone. Thumbs up!

Sure enjoy your videos the type of hard repairs. Across any spectrum is mind blowing. You sir are a rock ⭐️ can’t wait to see the progress on the mountain! Thanks for taking the time for use to see awesome in action.

Andrew thanks very much for the video. The drone footage was amazing. I'm "jelous" about that amazing piece of land. Amazing small mountain you have over there

AC, Dozer, and ATV's.... Lots of good AC content lately 😁👍

Always enjoy your videos & it's great to see a younger version of you learning the "how too's" from You.

As always a wonderful video curiosity is getting to me as to what you'll wind up creating on top of that mountain thanks for all the inspiration you make the world a better place thank you

I have probably watched every single one of your videos 5 times. That is how much I love watching your videos. Keep it up

Hi Andrew, I follow you from Italy ... I have seen all your videos, e on what you do, you can see that there is passion ... Beautiful dogs and all that you have built and congratulations also for the estate and the fleet. Keep it up you are a great ... Greetings from the Italian 👍

That view you have on the edge of the cliff. It is just so beautiful.

Levi would of loved that spot up there!! Miss that dog!!

Some voltage drop is to be expected if there's a large current draw. You could reduce the drop by using thicker wires, but it shouldn't be too problematic.

your repairs pay for themselves and then some thanks to your superb documentation. what a time to be alive right?

Nice toy's Andrew. Awesome to have help. Beautiful homestead.

Watching these videos during my lunch break is nice and relaxing for some reason.

Awesome video Andrew. What an amazing young lady to have around. Another pair of hands and another host of mechanical skills to help get jobs done. Keep up the great work. Hope you don't have any long lasting issues with your knee mate

A good channel is one that doesn't have to put out videos every week. content instead of quantity. Andrew is the master of this. always leave them wanting more :)

Your repair videos are my favorite to watch.

You always look like your enjoying the hell out of yourself. That is so great. Your videos pick up a lot of people and maybe inspire them. old and young. Keep up the good videos.

Hey Andrew I have a few vehicles that sit around away from available power and have found that solar panels & charge controllers work great to keep the batteries fresh for cheap. I couldn't imagine dealing with your many dozens of batteries.

Beautiful country love everything that you do and maintenance is very important. Glad to see you're not by yourself, Love seeing the dogs also

These repair videos have to be my favourite for sure !!!

I like these kinds of vids the most Andrew, a little maintenance and work together is relaxing and enjoyable to watch.

Great job 👏 make sure your up to date on your shots working around all that rust. Good luck 👍

You're on fire with these uploads man! It's a good day when you put out a vid

Tracing a wire to a bad connection is such a fulfilling feeling. Also ratchett straps for batteries are such a simple solution to the metal clamps that often decay into oblivion.

Good to hear and see you again. I truly appreciate your skills and talents that you share with us.

Nice repairs/maintenance, I still wouldn't expect that much voltage loss though, might need a heavier cable between the alternator and the cb. Brown pup looking great, growing well.

Love the small engine repairs

Your secondary plot is so beautiful Andrew, not as beautiful as your castle home but lovely none the less. It's lovely to see all the greenery great drone skills you have there and cute dogs 🐕 . Love watching your videos.

I see you fighting with machine batteries often. Had an old stubborn 85 JD 210 4wd. Best advice I got from an old farmer friend is to hook the battery tender to tractor and zip tie it there on machine. I’m up north east and having a quick plug makes life so much easier. The tender keeps topped off and it never struggled again even in a blizzard. Love content!! Thanks for all you have taught me :-)

Repair videos are some of my favorites from Andrew

Dear Mr. Camarata. 👍👌👏 Very well done again (video and work). You're definitely good with the drone. 2) Maybe putting some grease nipples on the pedal bases to lube the axle would help to handle the dozer. Unfortunately penetration oil doesn't last long as a lubricant. Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and health to all of you (including the wonderful dogs of course).

Nice To se That you have a helping hand When you work , nice lady, good for you.

Always great watching these videos. I had to write down that line, "That's slightly unprofessional but not unacceptable ". I need to remember that one.

Your partner is turning into quite a good camera woman. Enjoying the content as usual.

Andrew, great video as always! Nothing better than waking up with a notification of a new video from you! Seriously you blow away 99.9% of everything produced by everyone IMHO. No fake drama, no BS. Question, in the start of the video you are working on the Honda ATV carb, were those harbor freight tools and if so, how do you like them? Then when you are vacuuming out the bulldozer it appears you have a shopvac and 5 gallon bucket as the collection base? What is this setup, I have never seen that done before. That is a fantastic idea for nasty stuff! Hope all is well.

Andrew, looks like you and the dogs had a great summer thanks for sharing.

Done that a few times in my life, I have common sense on working on anything with atc and ATV and lawn mowers, plus I am pretty good at wood work/ carpentry, so many different jobs I have had in my life, as I will be 63 yrs old this month November 16th.

My grandpa had aurthritis but when it came to four wheelers that didnt stop him, when he became to authritic to shift, he had a bar attached to shifter that came up beside gas tank and shifted by hand

"That's slightly unprofessional but not unacceptable" I love it lmao!

Fixing your equipment is a satisfying feeling that makes life much better.

Thanks Andrew & who ever your helper is....👍