No matter how many of your repair videos I see, I always see something new an I end up learning something. 👍🏼👍🏼

You've just re claimed the tiltle of "The King of VCRs", The person who stole it from you finally snapped when he heard your cat meowing in awe

Not only can he fix anything, he can read my mind and knows when I need a Sanyo VCR repair video.

I'm so excited. I think in few years, no one will have the know how to fix such devices. Your knowledge is enormous. Thx.

That guy should keep getting angry if it means you upload so much, I'm thoroughly enjoying it! And it's VCR stuff too, best week ever so far!

I really enjoy the VCR repair Videos, I can't get enough of them, also I always learn something new when I watch your videos, I remember when I worked at a repair shop that we had this dummy video cassette that we could use in a VCR to put it into the fully loaded mode so that we could fasten the front mounted screws in the cassette basket

Hi there! I just wanted to say thanks man , for what? All your VCR repair videos as they have helped me learn alot. From watching these videos and seeing certain things that are similar in all models (Mode-encoder switch for one) i was able to fix up my old Samsung World Wide VCR that had me convinced the unit was destined for the trash ( Was randomly rewinding, ejecting and then stalling and when it would play the picture was full of artefacting) But, upon carefully removing the loader and head drum, checking the mode-encoder switch and finding it very oxidised i gave it a thorough clean. And, thanks to your videos too i saw how to adjust the tape alignment. Through doing all that the VCR works a treat now and im very glad because i nearly dropped a few hundred on a Panasonic NV-W1/W3 unit because i needed a multi-region VCR for transfers i do. So thanks very much for all your videos, they certainly helped me out!

Great video as always👍👍 love these old vcr's & old electronics videos it brings back memories of the 80's😇 as i used to help out (as a kid) in a repair shop and got to see many vcr's, stereos (remember when audio systems were stack up and those speakers) tv's and 80's electronics in general That is why i enjoy these videos & channel Thanks👍👍again for your time and for uploading these videos

As a school system audio visual repair tech from 1980 to 2010, I repaired a lot of these. Service information was hard to come by until the internet. Ahh, the "good old days".

VCR’s had amazing engineering. I’m surprised that they even worked consistently. I still have my JVC and it works great.

More power to you. I do not miss working on those things. To this day I occasionally wake up in a panic screaming "MODE SWITCH!" and cussing out Sony.

Great work Dave really appreciate the high level of detail re Timing

Thanks you about excelent classes. I like it. With you I have learn very much and the electronic does not cause me afraid or dude. Thanks you very much. Bless yo you.

Very interresting explaination about those Sensors and mechanism

that looks very like the sharp I fixed for the brother in law! It had the same fault, the gear on the side had gone out of place with everything else. As it was his and I didn't much like his constant wanting everything for nothing, I just made sure it was in the open position and prised the long plastic but out until it was fully unloaded. Strange thing is he never came back with it, it worked fine after that. I didn't much care for VCRs anyway, pain in the butt. But I was surprised he didn't reappear with it, maybe he thought I was a bit rough with it or it ran fine after that, I don't know I never asked. It was his VCR and no one was allowed to use it, selfish to the last!

I actually like this cam mechanism. Plastic fantastic, but at least it doesn't need to move long arms and linkages with too much leverage and friction. It also isn't driven by a belt drive, that's prone to slip on the motor pulley once the cam mechanism gets jammed. That was a frequent failure mode of central cam gear type servo systems (I'm looking at you, Funai). The forced setup screen is just outrageous. Almost looks to me like a partial sabotage attempt from a worker who did the programming of it. Just as one possibility. BigClive did once a taste test of denaturated alc. His reaction was priceless.

Hello from the UK. Great video. IPA 99% in UK is mega expensive now coz of Rona.👍

Amazing video 🎉

It seems the newer the VCR the less you can do without a remote.

(20:10) - There is no ethanol or methanol in isopropyl alcohol. It is a chemical in it's own right. Ethyl alcohol (Ethanol) with the addition of methyl alcohol (methanol) is is generally called *_methylated spirits_* or *_"denatured alcohol"_* and is usually dyed purple to indicate that it's toxic. Isopropyl alcohol, commonly called isopropanol is a colorless, flammable chemical compound (chemical formula CH3CHOHCH3) with a strong odor. As an isopropyl group linked to a hydroxyl group, it is the simplest example of a secondary alcohol, where the alcohol carbon atom is attached to two other carbon atoms. It is a structural isomer of 1-propanol and ethyl methyl ether. >

I would like to know why you don't usually remove the head auto clean assembly. In time it could cause much pain, at least it did to my vcr. The heads almost got hit by the plastic arm. BTW awesome repair video.

Do they grease all the gears?I never seen 99 percent before all could find is 50 percent ,I use for cleaning tube radio chais ,When this virus stuff is done I will try to find good alcohol, you are right it's hard to find very hard

Nice one with the double bearing tower capstan. Haven't seen something like that since the Panasonic K mechanism and some '90s Sony. I certainly haven't seen this in a VCR this late: it was made in 2002. You can see it on the loading motor at 8:04 (0212 date code). I wonder who made this, maybe Funai? But I haven't seen this type of capstan in any Funai/Orion VCRs either. JVC maybe?

My Panasonic VCR is having power supply issue, is there any way capacitors can damage. Show no sign of burst or swelling.

Well I have a Hitachi 8mm Rapid Reflex. It plays but I have some horizontal lines maybe with some black and white coming in . I'm not sure what the issue is be it almost plays if you know what I mean.

Thanks for a great channel, love your video's. I have a VCR thar won't power up. It makes a clicking noise in power supply. Do you have any suggestions? Thanks :-)

How to clean those sensors ?? One of my vcr runs for 5 minutes and stops

Looks like the looser with two YT accounts has been here already and disliked this video. Well at least he/she has something to do...

Sir I have national g500 vcr while in play mode reel counter not move.please tell how can solve this problem

What's the name of that contact cleaner??? Can I use petrol instead ??

Those are about forty five dollars at Walmart ten years ago.

Sounds like you have a lot of airplanes in Canada now. Is the lockdown ended there.

For a cheap-ee it seemed quite decent for playback :-D. I'm no lover of deck on pcb designs, also having the switchmode psu on the same board is a no no for me. Dam remote only units, utterly stupid design.

Is it the mode switch if a VCR loads a tape, then shuts down, while the guides do not retract, ( or the reels do not take up the slack) so you cannot take the tape out? The only way to get the tape free is take the top off and lift it off of the guides? It's a VCR DVD recorder combo.

(21:03) - That 99% isopropanol is perfect for making hand sanitizer. You simply dilute it to the desired strength with distilled water. >

Same frustration here, can't find 99% IPA at the store.

Is denatured alcohol an acceptable alternative to 99% isopropyl for this application?

I have a DVD/VCR combo unit my mom got me for Christmas in 2003. Haven't used it in a few years and I have tapes I really need to transfer over to discs. Chalk it up to being lazy I guess.

I've not even watched the video yet. But sounds like the mode switch needs cleaning.

maybe a ir remote app for your phone will work. i use it al the time.

Is 91% Isopropyl Alcohol good enough? That's all the stores seem to carry around here. Haven't seen 99% in years.

Please do a give away of one of your vcr ...it will be highly appreciated sir

😺🐈

are you gonna tidy up your lab?