FYI these engines have a failsafe and will run without coolant, they will run on a few cylinders and swap when they get too hot. Should be able to do 50km+ no worries.

I recon the reason that wheel bearing went was the spacer, put alot more stress on the bearing itself with more leverage, get use to replacing them with spacers

Au doesnt need water. Can skid it for hrs without oil or water👍

I like how you replaced the tank with another second hand unit- wont be long before you go through this process again. Barns have new ones that are better than OE for like sixty bucks, or you could even get an alloy one that will last as long as the car does.

4480s melt every thimg on that side i used a factory ba turbo heat shield they fit mint over 4480s n stopped melting bottles and the loom on that side

It was probably caused by the extractors since there so close to the expansion tank now I think people use the turbo barra heat shield for the 4480s

the wheel bearing mightve been fine with that much camber, but that much camber plus the massive wheel spacer wouldve been why it was fuckd

1:32 That’s one way to make a triton prettier 🤣

Just FYI - The heat from the 4480s being so close is what caused this.

bird sounds are really calming

Saw the mighty AU out and about last night, loving the work so far

SXYCAL is honestly a character in this video 🤣🤣

The overflow burst because you don't have the right temp spec cap common problem as the after market one's are rated abit higher temp than the factory one and the wheel bearing failed because of the extra load put on them by the wrong wheels that needs a spacer to fit them on an au rectify these problems and you will stop breaking things

Thanks Benkispec for my order, From NZ ☝🏽

I wonder if some sort of heat shield would prevent it popping open in the future?

That camera quality is brilliant love it 😍

Not much fun when having problems and yes the same thing with my AU thermo fans aren't turning on just the little things are always frustrating but staysafe mate cheers from Bill

No surprise haveing larger headers near the tank and no heat shield buy a alloy overflow tank on ebay

Get a metal overflow please

Spacers do reduce the life of your wheel bearings

Just get some ugly tin and make an ugly shield , I need to do the same , although mine ain’t as bad as what yours just did 😂😂😂❤️❤️❤️

Not broken just small inconvenience

That's and the power steering leaking on the exhaust and catching fire are both issues iv had like 3 times

I did my wheel bearings on my forte III like 2 weeks ago, . . I'm surprised you didn't have to use a bearing puller. . . I certainly did haha

Fix or repair daily lad

Just as well you never sold the Camry 🤣😅

Shit I changed all 4 sets of brake pads on my BA Falcon recently because they were screeching and since then the screeching has stopped except for this rhythmic scraping that only happens at lower speed and sounds like its coming from my front driver wheel, I jacked it up again the other day to see if there was an obstructions that could cause it to be scraping but couldn't really see anything obvious except I notices my wheel bearings has noticeable play like in this video. could that play be causing the scraping noise?

Don't have a fire extinguisher.. in a car that was mainly built for a track purposes.. 💀🤦‍♂️

im no aussie but mate this car barely runs, i think wheel bearings are the least of your worries

I liked, because less falcon content and more chaser content makes me happier :)

Lol mine au xr6 and turbo and done 900,000kms so far and still lives on 10psi and 550kw

Mighty intech woke up on the wrong side of the bed

Hey is it possible modify a 2000 Toyota Corolla CE 1.8 it's my first car and I'm tryna get some more performance out of it.

rex hunt

The tool pro 12v ratchet is discounted for some STUPID reason.

very common problem

yeah the rexton

well ford does stand for fix o repair daily

Haha mine has the same problem but at the front and not as bad

Just take the cap off and drive it home.

Still haven’t heard from toolpro😢

AU's don't need coolant

It is a ford all Breakdown

Anyone know the wheels he is running on the au

How many ks does the mighty au have on the clock?

your au not finding idle, just leave the battery unplugged over night, had that issue on a few of mine when ive changed the coil pack or leads.

Hi 10/10👍👍

ford things 😂

Don’t forget to like people👍

How are we boys? Yeah nah.

Second

first

stupid car

Mine legit went a few weeks back. Lucky I was near a bursons and just got one in store and installed it where the car sat