AU FALCON MANUAL SWAP BEGINS! LAST SEND IN THE AUTO

No video

AU FALCON MANUAL SWAP BEGINS! LAST SEND IN THE AUTO

Рет қаралды 20,064

Күн бұрын

➢Store: www.benkispec.com
DISCOUNT ON TOOLS | CODE: REX10 For 10% OFF: garagetools.co...
➢Instagram @rex_hyt / rex_hyt
My GEAR -⬇
Camera geni.us/tWKpwD
My FAVOURITE Lens geni.us/hmxjq
Vlog Lens geni.us/Q1cld
BEST Starter Camera geni.us/q4yoK
Gimbal geni.us/JprwEje
Microphone geni.us/O3njD60
TOOLS I USE -⬇
Socket Set geni.us/8UBox
PICKTOOLS (Live Saver) geni.us/oQKoU0
SEND ME STUFF HERE:
P.O. Box 2178 Brighton North 3186, Australia, Victoria

Пікірлер: 82

@brendanmatthys3788 3 жыл бұрын

Doing a manual swap on an AU was the shittiest job I've ever done in my life. Really woke the car up afterwards though! I was on my P's at the time and it honestly made me question how it was P plate legal

@chewybong1013 3 жыл бұрын

it made you question if it was p plate legal, its an au they not all that great

@brendanmatthys3788 3 жыл бұрын

@@chewybong1013 A manual AU with a 3:45 diff ratio has a bit of grunt mate. Chuck some poly bushes in it and give it stiffer springs, you've got yourself a really fun daily driver

@chewybong1013 3 жыл бұрын

@@brendanmatthys3788 so does any ford/ holden 6 with 3.45s or higher whats your point

@kyrieeleison1905 3 жыл бұрын

did a manual swap in my old EF ghia that had the tickford motor and the 3.45 lsd.. yes she sure went good after that.. plenty quick enough to get yourself in trouble especially with a tight LSD.. swap wasnt that hard really, if u have had to swap the auto box before that is not a fun job when the car is on jackstands..

@rhythmrides8902 3 жыл бұрын

Try doing a manual conversion on a bf xr6 😂 even bigger pain in the ass, I’ve done 5 AU falcons and 2 B series falcons, I rather do AUs

@killzor7714 3 жыл бұрын

looks like you had a struggle fitting the flywheel thats because the bolts only line up 1 of 8 ways i had that issue when i manual swapped my ba and sohc bottom ends are exactly the same just give it another go and make sure you see if the flywheel fits any other way

@brettsynon 3 жыл бұрын

this man! glad i sussed if anyone had said it yet.... but yer the flyweels always a cunt like a game of russian roulette trying to line it up without dropping it on your head hahahah. and for some reason you seem to always start one off and have to spin it a few times befor you find the right pattern

@leroybrown6946 3 жыл бұрын

Top job guys, it kinda makes me sad, as when I was 16yo and had my 4 AU falcons (1 wagon with xr6 running gear and front end, a xr6 sedan with full options a AU3 pursuit ute with the 5.6L winsdor stroker motor and a standard 6cyl ute as my work ute), everyone was hating them so much, but now a lot are appreciating them

@massivecockedman2403 2 жыл бұрын

That series 3 would b big big money now

@anthonyangelovski3039 3 жыл бұрын

Looks like your rear welsh plug is leaking too! I'd be changing that 100% while you've got it apart.

@jamesfalzon9364 3 жыл бұрын

that demonstration of the "clonk" deserves an AACTA award

@RexH 3 жыл бұрын

hahahaha ikr, couldt have done it better myself

@RexH 3 жыл бұрын

MERCH RELEASE IS THE 22nd of August for those asking!

@motoringmania8111 3 жыл бұрын

Woohoo! Looking forward to it!

@joshwilson8503 3 жыл бұрын

Good to see videos like this of people giving anything a crack, I also did a manual conversion for the first time before I put the barra in, also fun fact an ef el diff will bolt straight in and will allow wider wheels to fit on the rear

@tio123ist 3 жыл бұрын

Yeah man can't wait for this build to finish then get wasted on drifting lol. UP THE ALMIGHTY AU👌

@pingapete666 2 жыл бұрын

how the fuck is drifting a waste? these cars are made to be abused

@tio123ist 2 жыл бұрын

@@pingapete666 that's what I meant get wasted, abused, what ever you want to call it Karen

@jrsgarage7211 3 жыл бұрын

I'm so happy for you and the channel! Has been a long way since the channel first video!!! Great job bro! 🏅⭐⭐⭐⭐⭐

@morris9651 3 жыл бұрын

It’s finally a car now

@leigh810 3 жыл бұрын

ngl, i noticed the hoodie before u pointed it out, looks clean. im keen for the next vid bro

@uskbull6639 3 жыл бұрын

The hand shifter was great

@jdtv5065 3 жыл бұрын

Hope you found the manual flywheel

@vAspect 3 жыл бұрын

ughhh AUUU FALCON I WANT ONE

@RexH 3 жыл бұрын

Everyone needs one!

@mitchterry7378 3 жыл бұрын

UP THE FALCON

@RexH 3 жыл бұрын

UP THE ALMIGHTYYYY!!!!

@SimpleSpud8 3 жыл бұрын

1:58 "he said it's mint"

@RexH 3 жыл бұрын

lets hope "it's mint" hahahaha

@theenemyarea7969 3 жыл бұрын

AU Falcon content 🥰

@JT-152 3 жыл бұрын

🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽

@Snoop_gee 3 жыл бұрын

Let's vote Rex to Barra swap the AU. ☝🏻

@scottjohnson9008 Жыл бұрын

Where is the next part of this manual conversion??

@Coolwow437 3 жыл бұрын

Aye can't wait for this build honestly 😉 au falcon 🤙

@RexH 3 жыл бұрын

Hell yeah man! 🥰

@Coolwow437 3 жыл бұрын

@@RexH keep grinding my man your doing Australia proud and the car community ❤️

@jaynus9429 3 жыл бұрын

So keen ✊

@gokupokemon3040 3 жыл бұрын

Well done and good work 8\10😄😄😄😄😄

@Baz9667 3 жыл бұрын

Up the fckn AU

@Macoosy 3 жыл бұрын

Hub nut brought me here

@easytalker864 Жыл бұрын

Does the Tremec gearbox fit into an AU?

@darcykeddell4930 3 жыл бұрын

Don't know about using a chrome socket on the gun but good vid

@jhettbrewin322 3 жыл бұрын

u can tell its been one of those jobs when Rex starts speaking propa Australian

@sarcasmgaming7235 3 жыл бұрын

YEAHH THE MIGHTY AU

@RexH 3 жыл бұрын

YEAHHHH BUD!!!

@benni727 3 жыл бұрын

@@RexH yo ya need to spin the flywheel around multiple times and the bolts will eventually line up. there all off set holes. also put flywheel on clutch split bellhousing from the gear box with the 4 bolts way easyer to put it back together

@benni727 3 жыл бұрын

pedals are easy to fit undo the 2 bolts on the coloum theres a 10mm nut at the end of the coloum where it meets the fire wall pull it out undo brake booster ans unclip the dash loom and they should be out

@dangerm3496 3 жыл бұрын

Editing is on song bra

@wlo7868 3 жыл бұрын

Yoooo. So when's the giveaway?♥️ It looks mega sleek!

@RexH 3 жыл бұрын

mmm i should do one next week

@AntiLGBT_SuperExterminator 3 жыл бұрын

yooo I'm new to the channel i started to like it here

@MitchMobiles 2 жыл бұрын

can u guys give me a rough total price on the manual swap?

@ashleyekins7260 8 ай бұрын

Hey mate ive just done a manual conversion on my series 3 and did the resistor trick but its doing the same thing yours did, pumps fuel has spark,cranks but won't start. Wot was the last thing you did to get it going?

@kane9956 8 ай бұрын

Hey mate I can't answer your question but was it a dash out job for the pedal box?

@BenPorter-zo2fd 6 ай бұрын