Audi 2.7T Timing Belt Replacement | Audi B6 A4 2.7T Swap |

Рет қаралды 6,786

Жыл бұрын

Today we are doing the Timing Belt Install on the Audi 2.7T engine for my A4. This video is more of a tutorial style video, but I do more on my channel such as dirt racing and sim racing. Please consider subscribing if you are new here or if you are interested at all in my content. Thanks!
Camshaft Locking Tool: www.amazon.com/dp/B07KF5SNB7?...
Timing Belt Kit: www.partsgeek.com/ss/?ssq=tim...

Пікірлер: 13

@russellp73 2 ай бұрын

Pretty sure that stud on the tentioner pulley goes on the inside. There's only 1 space it can go and it rocks back and forth about 1/8th of a turn. Edit. I went back to the beginning and the original shows how it should be installed.

@ProjectCarTV Жыл бұрын

Nice

@therealmilo.tin__b6530 Жыл бұрын

There is an Easier way instead of fighting with that timing belt but if its your first time doing this you got a lot to learn my friend

@therealmilo.tin__b6530 Жыл бұрын

If you get the Chance to Watch my timing video you'll see what I mean

@beerwrenchgarage 9 ай бұрын

10000% right on with your way of doing it, Milo! Thank you!!!

@oiiia2991 9 ай бұрын

Having a tool, you set the ignition incorrectly! You need to release the gears so that they spin, and then release the roller for tension. Then the tension on the belt will be uniform everywhere!

@jasonberning1086 7 ай бұрын

Correct. Former Audi master tech here. He DID NOT do this correctly. Cam gears/sprockets need to be loosened and broke free from camshafts or timing will not be correct.

@laaronestrada990 8 ай бұрын

after a month of doing timing belt replacement my marks are off and crankshaft are no longer horizontal, what can I do?

@matthewdavis2287 Ай бұрын

One thing your lacking is the torque specs

@jasonberning1086 7 ай бұрын

Former Audi master tech here. This was not performed correctly. Cam gears/sprockets need to be loosened and broke free from camshafts or timing will not be correct.

@russellp73 2 ай бұрын

Was the tentioner on inside out? I think the stud goes on the inside.