AUDI A3 8P - How To Remove Front Bumper Removal Replacement 2004-2012

Рет қаралды 76,794

3 жыл бұрын

Guide on how to remove the complete front bumper assembly from an Audi A3/S3 8P S-Line (Mk2), years 2004 to 2012.
Tools used:
-Impact Driver 3/8”: amzn.to/3bVc4ii
-T25 & T30 Torx: amzn.to/2NWrfON
-10mm socket & extension: amzn.to/3luPyQv
-------------------------------
www.selectvehiclespares.co.uk
-------------------------------

Пікірлер: 26

@SelectVehicleSpares 3 жыл бұрын

Tools used: -Impact Driver 3/8”: amzn.to/3bVc4ii -T25 & T30 Torx: amzn.to/2NWrfON -10mm socket & extension: amzn.to/3luPyQv

@iamneo1690 3 жыл бұрын

Thanks for the tutorial it's great, can I just ask is there any guides or clips under the light unit that the bumper attaches too? Mines is sagging under the light unit and doesn't look like it was aligned properly.

@SelectVehicleSpares 3 жыл бұрын

@@iamneo1690 Yes, there is a small guide on the front panel underneath the headlight.

@iamneo1690 3 жыл бұрын

@@SelectVehicleSpares Thanks a lot, I'm about to do this in the next hour, again great video I watched it several times to familiarise myself with doing it

@tan_ives 3 ай бұрын

Brilliant, clear video. If only all how-to clips were this helpful. Many thanks

@jb9652 3 жыл бұрын

Wonderful: Meticulous, Clear and Concise. Thank you!

@RockDonutGaming-gp2hn Ай бұрын

I just wanted to get some idea of the work involved, cool vid very clear and straightforward… I think I will be paying someone to do it though, bit beyond my capabilities! 🙂

@nicks2528 Жыл бұрын

Thank you nicest explanation easiest to follow

@Seether4ever1986 2 жыл бұрын

Nice and easy straight to the subject!

@cosmeticcarrepair Жыл бұрын

The 10mm bolt is the one I missed. Couldn’t get the bloody thing off 🤣

@nicks2528 Жыл бұрын

Thank you

@chiccoka 2 жыл бұрын

thx/ mine is fl but iom sure it helps to find them also

@philipwatts9033 6 ай бұрын

Parked over a kerb yesterday pulled the bumper brackets out snapped both 10 mm bracket off completely. Day of trying to epoxy the bracket on didn’t work so it’s back on but with no 10mm fixed either side

@quattro192 2 жыл бұрын

Do you know what is the part number of the radiator guard? Mine broke, and my bumper is not attached from the bottom

@Igor3D 3 жыл бұрын

Street curb catched my bumper on the left side while I was parked and started going reverse (A3 2010) and I pulled left bumper part off broking most of the holders on that side. Can this be repaired sucessfully, or it is better to replace the whole bumper? There is no visible destruction on bumper surface, but actual holders and other things are looking pretty bad... I want to kick myself in the bu** for not seeying that high profile curb while I was parking.

@SelectVehicleSpares 3 жыл бұрын

If you still have the broken pieces you may be able to find a bodyshop who can plastic weld them back on. If not then it would be a new bumper.