🔗 Download firmware update from mibsolution.one/ 🔗 Fix SVM B201A fault code with mib-helper.com/im-so-xory/ 🛒 Buy OBDeleven here (ref): mr-fix.info/redirect/obdeleven 🎟 Get 10% OFF with code: MRFIX10
@Kiss__Kiss5 ай бұрын
Always have to say thanks for your continued info/updates!! Even if I don't own an A/S/RS 3 lol (But own a B8.5 allroad, and a B9 S4).
@mrfixpl5 ай бұрын
I find it fun to watch firmware updates, even on devices that I don't own. 😅
@Berez19915 ай бұрын
Nowszy system już rozpracowany :) a ja bym chciał w starym poczciwym C7.5 wgrać nowszy wsad żeby temp oleju pokazywało od zera to nic nie ma.. Ale piona za to co robisz !
@e.chefranov5 ай бұрын
Key need to hold only on beginning of process. You don't need hold whole time there. Some updates support pACC icons. Don’t use fw above 0109 on A3!
@Konvict24105 ай бұрын
Hi, on my audi a5 2017 coupe, i have navigation on main display but on virtual cockipit there isn't nav option. Is it possible to activate? Do you know?
@markrol73625 күн бұрын
On a3 its only 0047 and 0109that support pacc. 0109 is harder to find. Fw 0150 and 0169 are q2 only..misplaced icons and brakebooster issues if used on a3. Keep away
@VenomSeb5 ай бұрын
Thanks !! Nice tuto 👌
@MrKinezos015 ай бұрын
hi, i have the same VC , can you please show how to update EU maps with MIB SOLUTIONS? i dont wont to pay AUDI CONNECT ..... for no reason and my maps are 2020 (GREECE) Thanx for the video
@mrfixpl5 ай бұрын
Hi! I will cover maps update in upcoming days. I also have old (2019) maps with just as old license code. Subscribe and stay tuned!
@deima55895 ай бұрын
Tried to update to the latest, everything went smoothly and seems to work. But now some of the icons got misplaced on the VC. And it seems like I cannot retry the update, tried to turn off the car and on. But the icon is still misplaced. Anything I can do to fix my ocd? 😅
@mrfixpl5 ай бұрын
Show me, Please.
@kaderMerazga5 ай бұрын
Merci beaucoup 😊, thank you so much
@andream97955 ай бұрын
Hi, can you do the same video for an Audi A4 B9 to update the Virtual Cockpit Version from 0275 to the newest? Just to code S4 Sport Layout, that need at least SW 0300. Thank you
@Caddymirza5 ай бұрын
i have the same problem as you :) and same sw version with same car. I need it too for S4 Sport Layout! But im not sure which sw version is good for our VC! I think this one is good for us (AU_C1_AU491_0313_0991_prod_8S0906961AG_A4-A5-Q5_2017)
@hy-x-amp66272 ай бұрын
I need too
@hy-x-amp66272 ай бұрын
@@Caddymirza Where can i download?
@Nsb93_5 ай бұрын
Hello Does it work the same way for audi a4 b9? Can u give me the link for it please i got firmware p5092
@conteciro915 ай бұрын
Hello @mrfixpl and first of all great videos and thank you for all the infos 👍🏻. I have A3 with sw version 0066 and I have some doubts: Is this update going to delete the 'OBD' and 'More Incredible Bash' modifications that I have done to the virtual cockpit? And which are the improvements of this update? Thank you in advance and keep up the good work 💯 🙂
@mrfixpl5 ай бұрын
I don't think any mods will be overwritten by this update.
@markrol73625 ай бұрын
Please be carefull. etron updating to 150 has missplaced icons. Reverting back to 109 got him defect eeprom. Milage shows 999999km ..
@mrfixpl5 ай бұрын
Wondering if the 0109 was corrupted or the downgrade in general was not the proper way to go.
@Konvict24105 ай бұрын
this way of checking firmware version on my a5 H20 VC , doesn't work. fuel reset button is on right side of steering wheel
@aurelienhavard35213 ай бұрын
Hi. I follow all your step for update but in red menu, after reading my SD card all I can see it’s « NA » on each line so « update » stay grey and I can’t click….what do you think about it?
@deima55895 ай бұрын
Good video as always, but I was wondering if I’m doing something wrong. I tried to check the firmware on my Audi A3 E-Tron 2018. I pressed 00 4 times and on fifth time long pressed. But nothing happened, only thing that happened it showed engine code where KM of vehicle is. But it didn’t show any tab with firmware.
@mrfixpl5 ай бұрын
Door closed, start pressing immediately after turning ignition on.
@deima55895 ай бұрын
@@mrfixpl ok, thanks. I will give it another ago
@Konvict24105 ай бұрын
have you figured out how to check version of firmware?@@deima5589
@Luka-ov1hu5 ай бұрын
Hello, it’s not video theme but… is there any way to baypass cid lock card on MST2_EU_VW_P0891D unit. Car don’t have card at all
@mrfixpl5 ай бұрын
use MST2 Delphi SD activator by Congo & Duke. It will remove CID-lock.
@Luka-ov1hu5 ай бұрын
@@mrfixpl Thank you a lot
@at0ny5 ай бұрын
Could you make a video about the mhs2 Congo toolbox pleasure, same as tor the mh2p units? They are also interessting.
@teerathdiocee21684 ай бұрын
Hi, can anyone help with this, since doing the update, I am unable to turn off ESP/Traction control with the button on the dash, I replaced the dashboard unit with my families A3 and confirmed the button itself is fine, (it turns off the traction in her A3 but not my S3), swapped the A3 unit to the S3 and same issue, when pressing the traction button nothing happens, traction control itself does still work and kick in when I get wheel spin, but I cannot turn it off to do a launch by pressing the button since updating ! Any ideas?
@juki4710Ай бұрын
How to know which platform i have and which update i nead 1:48
@bojantambur62962 ай бұрын
Hi Is anyone upadate VC H19 version on A5 2.0tfis 2017year to confirm it is safe ? And how to enter in VC hiden to menu to see FW on A5 ??? Thank you
@Maurizio65-cc8cp5 ай бұрын
Salve, installando su audi a38v il file 0150 sa se si può codificare con obdeleven la visione dei km parziali del contachilometri perché con la versione 0047 non è possibile, Grazie!
@themrourumov5 ай бұрын
@mrfix Will you have the update to the mib3 Regio infotainment system, version 0578? Thank you very much for your videos, they are the best!!
@mrfixpl5 ай бұрын
I don't have any updates. but you are free to browse what's on mibsolution server.
@markrol73625 ай бұрын
So please stay away from 150 update if you have etron!!
@mrfixpl5 ай бұрын
Added warning to the description.
@e.chefranov5 ай бұрын
109 works fine on A3 e-tron. Everything above it's for Q2
@simicevac5 ай бұрын
You are GREAT!!!
@mrfixpl5 ай бұрын
😉
@simicevac5 ай бұрын
@@mrfixpl Hallo, ich habe letztes Jahr mein Audi gepacht und seit dem kann ich nixjt nicht mehr poi Blitzer aktualisieren. Es steht immer "Kartenmaterial nicht kompatibel oder veraltet". SD fat32 formatiert, auch mit USB probiert geht nicht. Danke im voraus.
@philwhatever39035 ай бұрын
Mr Fix, i know you need to update the maps on your S3 haha, still waiting for your video on that,…….also would love to know if you have floor mats in your car (prob not) and which ones you get or looking at? I need some for mine, mine is a RHD car though and cant get the official rubber ones for RHD😢
@MattSeeley-yu9im3 ай бұрын
Looking to update my Q7 will the system only let you update with a compatible software update?
@vasilisk99034 ай бұрын
Thanks for the video, how have you enabled sport layout? I have an Audi tt please upload a video step by step to enable it. OBD eleven asks 100€ in my country which I don’t want to spend.
@pool20323 ай бұрын
s3 have sport original layout from factory.
@Superkolos5 ай бұрын
Good Video m8
@boom-cz8vf5 ай бұрын
Hi, if it is possible to install a used board COCKPIT
@ariasmas55 ай бұрын
It's possible update the FW of Virtual Cockpit in the Golf MK7 P/N 5G1920791A?
@Uturnification5 ай бұрын
@mrfixpl can you update Audi a6 clusters from 2015 FL?
@differdfАй бұрын
Thanks for all tutorials. I updated MMI, maps, and it seems I need to update VC as well to get working Android Auto. Phone shows it is connected, but nothing shows on VC (2016 Audi TTS). My question is if I need to clear erros with OBDeleven, or is it enough just to do the update and ignore errors? If I need to clear errors, then which OBDeleven is enough? Is white pro enough?
@differdfАй бұрын
I did the update without OBD part and it is fine. Initially I got errors with tire pressure and cruise controll, but they disappeared after a short ride. Currently I have no visible errors in VC. Aparently some older VC models (2015?) might require reset after update by disconnecting battery - but in my case VC restarted properly.
@im2fast4me5 ай бұрын
what if i have fault at 5F but OBDeleven on Confirmation of instrument change showing me key 0 ?
@mrfixpl5 ай бұрын
Old key: 00 00 New key: c9 d2
@im2fast4me5 ай бұрын
Dzięki :)@@mrfixpl
@im2fast4me5 ай бұрын
Wyskakuje mi (31) function not available obdeleven mam w wersji ultimate wiec to chyba nie wina obdeleven
@im2fast4me5 ай бұрын
naprawiłem używając M.I.B :) @@mrfixpl
@RSDETAILING-uk4om5 ай бұрын
Please help me to find where to download the firmware MHI2_KR_AU57X_P0901
@AlexsanderBarberino_Ай бұрын
Sensational . I have an Audi A3 2024 in Brazil. Here in my country it doesn't come with the map released, can I update or unlock the map and other packages? If possible, can we do it remotely?
@AndrewTSqАй бұрын
Hi, do you have wireless Android Auto? My A3 only supports wireless Carplay, but I have seen A3 having wireless android auto, so I guess my unit needs and firmware update aswell to enable that...
@cuozzofrancesco26053 ай бұрын
Hi, after doing this update I get the “brake servo restricted error”. Is there a fix for this?
@Why188253 ай бұрын
I had the same issue, and ended up having had to replace the unit. A3 2017 with virtual cockpit hardware version HW14 should not go above software version v47, or else you'll be getting these error messages that are not stored in the car's memory, so Audi cannot fix it. Applying an older version will damage the unit, with the tachometer getting stuck at 999,999 km, with even the trip computer not measuring the distance travelled
@cuozzofrancesco26053 ай бұрын
@@Why18825 Hello The only option is to replace the entire Virtual Cockpit?
@Why188253 ай бұрын
@@cuozzofrancesco2605 yes, I had Audi working on the error message for weeks, with the Audi dealer working with Audi directly, but they were unable to fix the issue. Then I upgraded from 150 to 162, which made no change. Then I downgraded the SW from 162 to 47, which is the highest version for hardware version H14, and this resulted in the permanent damage to the Eprom managing the tachometer. So I had no other choice but to request a replacement of the unit. Interestingly, the new VC unit has the same hardware version of H14, despite the fact that it's 2024, and the car is from 2017. This tells me that the VC software is closely linked to the hardware version of the unit. This fact should be highlighted to everyone planning to update the software as many here report the same error message appearing to them...
@Rodgtimkv3 ай бұрын
@@Why18825 I have a Q2 with HW-H16 and SW-0066 and I updated with H16 and SW0162 and "brake servo restricted error” Any solution or help link?
@aidanmilner83512 ай бұрын
@@RodgtimkvI’ve got the same problem Q2 H16, as far as I can tell there’s no fix, only option is to pay Audi for a whole new virtual cockpit
@rizskaa83895 ай бұрын
Hello and thank you for this quality tutorial! I have a polo 6 aw gti with virtual cockpit but I can't find the file on the site :( My unit is 2G0 920 790 and only files for 2G0 920 790B are available. I have version 0620 on my AID Do you know where I can get this version? I thank you in advance :)
@furkani13223 ай бұрын
@mr-fix works it like the same in seat VC?
@justrobin12344 ай бұрын
The 5x and hold didn't work for me on my Audi TT MY15. Any ideas?
@justrobin12344 ай бұрын
Got it, was a timing thing. Do it straight after pressing the start button.
@AbrahamMusalem4 ай бұрын
Hey man, thanks for all the videos. I was able to update my headhunt and cockpit on my 2016 Audi TT. When I went to install M.I.B to enable CarPlay, the MMI is now stuck in initializing. Can’t get in the menus or anything else. Is there anything your recommend?
@justrobin12344 ай бұрын
Did you sort this?
@reiterfabian60655 ай бұрын
Hey mam A3 8V rock 2017 z VC i chcial bym jak w S3 po srodku licznik das rade ?
@mrfixpl5 ай бұрын
Można to zrobić przez OBDeleven lub CarScanner.
@reiterfabian60655 ай бұрын
@@mrfixpl CarScanner pro mam na iPhone Jest to ten ?
@mrfixpl5 ай бұрын
tak.
@reiterfabian60655 ай бұрын
@@mrfixpl hey Audi Sport Layout (FPK Gen.1 / VC Gen.1 only AUDI) Only AUDI, only Virtual Cockpit gen.1! To za codowac? Pozdrawiam
@reiterfabian60655 ай бұрын
@@mrfixpl udalo sie wielkie dzięki
@rvarm215 ай бұрын
What new features does it have?
@mrfixpl5 ай бұрын
It fixes my OCD - I couldn't sleep knowing that there's an update pending 😅 But for real, it fixes last used tab memory for me. Still looking for more changes.
@rvarm215 ай бұрын
@@mrfixpl what problem is the tab memory? I think mine does not have any problem idk haha
@bartekgti5 ай бұрын
Witam. Czy w Passacie B8 jest taka sama procedura aktualizacji firmware AID?
@mrfixpl5 ай бұрын
Powinna być taka sama. Nie mam jedynie pewności co do tego jak dobrać soft do aktualizacji.
@bartekgti5 ай бұрын
@@mrfixpl no właśnie jeśli chodzi o softy Audi są ładnie posortowane i jest ich sporo, do B8 jest jak na lekarstwo...
@emiltiara15 ай бұрын
Cześć, po update VC mam taki błąd: "Wspomaganie hamowania: działanie ograniczone. Możliwa dalsza jazda" OBDEleven i Carscanner nie pokazują żadnych błędów. Jakieś podpowiedź?
@VenomSeb4 ай бұрын
I have something like that : in French : « servofrein fonctionnalité limité » Audi says It’s a VC bug… need ro change the whole unit, price 5000€…😮
@MattSeeley-yu9im3 ай бұрын
Is this the same procedure for a Q7 except the key goes in the centre console bit
@emir212133 ай бұрын
I also did my Q7 2017 and I placed the key near the armrest where it should be (key shown)
@MattSeeley-yu9im3 ай бұрын
@@emir21213 thank you
@SanSan-py3wr5 ай бұрын
Mape for MHS2_ER AU_P2035
@dipeshchunilal5355 ай бұрын
Need your help. Run an update on micro as with adapter and at the end got an error saying unable to read metainfo. Error code 8 and option to retry or cancel and I retried with same result so I cancelled, I am assuming that didn’t install completely. Run check with obd11 and vc version changed to car software 1329 as previous was 0371 also I don’t have the keys symbol under the stearing wheel?
@dipeshchunilal5355 ай бұрын
I also have now full sd card and not reading on the car? Stays grey. I had to rename metainfo2. From the download folder To metainfo2.txt
@dipeshchunilal5355 ай бұрын
Anyone?
@xaviervermaut20165 ай бұрын
Dear Mr Fix. Can you please confirm me whether the "AU_C1_AU736_0378_1280_prod_8S0906961AK_Q7_2018.zip" file is the one to be used to update my 2017 Q7 e-Tron (ODX Name : EV_DashBoardAU736 / ODX Version : 001027 / Software Version : 0370). I unpacked it and found a directory with a different reference "KI_FPK_AU536". Is this normal? Will the system prevent from updating to an unsuitable firmware ? Best regards, X.
@xaviervermaut20165 ай бұрын
I performed the update without issues. 🥲
@leijiao1074Ай бұрын
@@xaviervermaut2016 Hey, is this e-Tron specific firmware or Q7 firmware? Wanted to try this on my 2016 Q7 4M. cheers.
@bogdanbobrowski84065 ай бұрын
Witam. Czy mógłbym dostać jakieś namiary do pana. Pozdrawiam
@mrfixpl5 ай бұрын
Niestety nie prowadzę warsztatu i nie udzielam teleporad.
@bogdanbobrowski84065 ай бұрын
Z całym szacunkiem nie chodziło mi o teleporadę. Jestem właścicielem Audi SQ8 TFSI i moje pytanie brzmi, czy jest możliwość obniżenia o parę centymetrów bez wchodzenia w główny sterownik? Jeśli tak to czy pan wykonuje takie usługi? Chętnie bym skorzystał. Pozdrawiam @@mrfixpl
@mrfixpl5 ай бұрын
O ile coś się nie zmieniło od poprzednich generacji, to można obniżyć przez wykonanie nastawów podstawowych zawieszenia i lekkie oszukanie w czasie procedury. Jednym z kroków jest pomiar odległości od środka koła do krawędzi błotnika. Jeżeli zawyżymy ten odczyt, to sterownik będzie przekonany, że auto jest za wysokie i odpowiednio obniży zawieszenie.
@bogdanbobrowski84065 ай бұрын
A czy wykonałby pan taką usługę? Będę w maju w Polsce. Pochodzę z Krakowa. Pozdrawiam@@mrfixpl
@rtwcw5 ай бұрын
👌😃
@Konstantin_BY3 ай бұрын
Hello. tell me what is the latest version for the virtual dashboard of audi a5 2019. The dashboard code is now: C1_AU491_0417_1550_prod
@Shooter655Ай бұрын
Is there an available new version for my ? Thank you very much A_Au651_0022_0220_prod
@aidanmilner83514 ай бұрын
Hi, after doing this update I get the “brake servo restricted error”. Is there a fix for this?
@VenomSeb4 ай бұрын
Same thing for me… Did you start your engine during the flashing procedure ? I’ll start It and I thing It’s the cause of this message… Audi diagnose a VC bug and ask a lot of money for replacing the whole unit…
@aidanmilner83514 ай бұрын
I followed all the instructions and kept the engine off with the A/C and lights off. The update went fine but after it finished I started getting the brake servo error. I took the car to non-Audi mechanic and they replaced the brake pressure sensor which is usually the cause of the fault but it didn’t fix anything. They have told me that the error is most likely due to the update and my only option is to take it into Audi to get it fixed but now I’m worried they’re going to charge a lot for it.
@VenomSeb3 ай бұрын
@@aidanmilner8351i did the same thing with version 0162 found on a forum, engine off, lights off,… The update went fine too. But always the brake servo message… Audi Said It’s a Virtual Cockpit bug and need to replace It. They announced me 5000€ for the operation… @mr-fix, any help ?
@cuozzofrancesco26053 ай бұрын
I have since update the vc to 0162 a error Brake booster: Limited functionality. You can continue driving. Please contact service. Downgrade vc possible?
@VenomSeb3 ай бұрын
@@cuozzofrancesco2605I don’t know if it’s possible to downgrade without more problems 🧐