Рет қаралды 27,868
To remove the Audi A6C7 dashboard, you will need an 8-inch end head and plastic clip pullers.
First of all, you need to remove the two small panels, unscrew the two bolts under them by 8.
Then remove the cover plate above the steering wheel.
On both sides, remove the upper panels of the air duct and the air ducts themselves.
Unscrew the 4 bolts by 8 and remove the frame around the dashboard.
Another 2 bolts to 8 fasten the dashboard from the bottom.
To disconnect the dashboard connector, pull the orange lock down.
The battery did not turn off.
To polish the dashboard, I used DOCTOR WAX DW8319 paste and a sponge attachment for a screwdriver.
=====================
My blog on DRIVE2 www.drive2.com/users/mark47/