Audi S4 Motor & Transmission Mounts + Subframe Inserts Installation

Рет қаралды 7,806

Күн бұрын

➡️ Engine Support Bar: bit.ly/enginesupportbar
➡️ Diff Inserts: www.034motorsport.com/billet-...
➡️ Motor Mounts: carmaspeed.com/products/motor...
➡️ Transmission Mount Insert: carmaspeed.com/products/034mo...
➡️ Transmission Mount: carmaspeed.com/products/stree...
➡️ Driveshaft Tunnel Brace: carmaspeed.com/products/x-cle...
➡️ Rear Subframe Mount Inserts: carmaspeed.com/products/bille...
➡️ Shop for Parts & Apparel: carmaspeed.com
⭐️ Amazon list of tools & necessities -bit.ly/toolsfromcam
www.youtube.com/ @carmaspeed
www.youtube.com/ @cameronalfordbonus
Difficult Audi B9 S4 Install Made Easy: Motor & Transmission Mounts + Subframe Inserts
Chapters:
0:00 - What are we installing?
0:44 - Cars & Bids
1:25 - Unboxing All Parts & What They Do
5:53 - Motor Mount Install
- Driveshaft Tunnel Brace Install
- Subframe Mount Inserts Install
- Transmission Mount & Insert Install
- First Drive w/ All New Parts
Disclosure: This video includes affiliate links, meaning I may receive a commission for purchases made through these links at no additional cost to you. This helps support the channel and allows us to continue to make content like this. Thank you for your support!
Sleeper B9 S4 Drivetrain Mods w/ Ease! Motor & Transmission Mounts + Subframe Inserts

Пікірлер: 30

@CameronAlford Ай бұрын

Use this comment as a like button to show Brandon love for helping unlock the key to success on that motor mount install!

@markc9949 Ай бұрын

Hey Cameron. I just found your channel a few weeks ago. I'm a Dad with two young kids (both under 5). I had a bagged, semi-stanced Accord Coupe on big three piece Work wheels. I sold it a few months ago and my wife and I have just been sharing our CX-5. I work remotely, so I don't drive much anyway. I had a B7 A4 back in the day (2008) and always really loved the S4. I found your channel and I'm going to look at a 2021 S4 Premium Plus next week. Your mods are EXACTLY how I'd build this "cool dad car". Hopefully that's not insulting! Outside of that, I've been trying to get to church and kinda rekindle some sort of relationship with God. Your channel has been extremely interesting to watch, and I appreciate the general "chill" nature of your videos. My kids are so loud and crazy all day, it's great to unwind and watch your S4 content at the end of a busy day. Please keep this series going, it's incredibly interesting! Sorry for the wall of text, just wanted to give you some props.

@jackisback4949 Ай бұрын

Been loving this build fr

@Dillon000 Ай бұрын

An hour long?!?!!! Hell yea!! Grabbing some popcorn! Haha

@JC-kx7cf Ай бұрын

Did the mounts on my S5 a few weeks ago nearly the same way. Some notes that may help others in the future. No need to remove front bumper at all. Didn't use engine support from the top, just a "one legger" as you call it with a wood block under the oil pan. We did drop - but not entirely remove - the subframe .... leaving two rear bolts. Removed sway bar entirely. Did not touch the steering rack or disconnect that joint in any way. Removed lower control arm bolts @the subframe. And removed the large aluminum support that the engine mounts were attached to. It's all about how you "see" the job and it seems like we removed a bit more than you guys, but got the same end result in a fraction of the book time which is 7hrs. It was a 2.5hr job done by a (non-Audi) tech friend. With the right tools and a lift, this is not as onerous as I had anticipated. Nice work.

@VoltageStudio Ай бұрын

Nicely done. My wife's B9 A4 motor mounts are shot (fluid leaked out at 60k). But, still no noticeable issues while driving.. Rubber is mainly intact for now. So, should be able to kick that can down the road for a bit longer until it cools down again (I'm in PHX as well). Going to replace with 034 and will have to do it on jack stands which should be tons of fun (or rent a lift). I picked up a B8 Avant recently and bagged it. Then just swapped out all the front end suspension components and upgraded to Q7 calipers with SQ5 380mm rotors last week. My little evap cooler came in clutch to roll around wherever I was working.. Eventually she will be getting S4 swapped (interior, motor, etc..) after I find a good candidate on Copart.

@elibrady102 Ай бұрын

Dude good work, I love the camera positions so we can see what u are doing much love bro. ❤

@_iitzJay_ Ай бұрын

Just installed the transmission mount insert upgrade and it feels great!!

@nickbeal4720 Ай бұрын

I did my two transmission mounts two weeks ago. Did it on 6inch ramps and used a jack for lifting the transmission. Bit difficult but got it all done and much less slop. No added nvh either. Just got in the rear diff inserts which will be installed soon

@ath3138 Ай бұрын

This is the best B9 vlog build hands down. Really sad to see you let the car go.

@imkylewydd Ай бұрын

Been awhile sense I watched new video but been watching the 350z series for awhile. And much love cam

@joseph.slezak Ай бұрын

glad to see you repping the best beer

@joeytapia831 Ай бұрын

Ready for some driving shots

@thewolfgrump1572 Ай бұрын

Hey since you pretty much fully disconnected your subframe your going to need to get your car aligned also awesome video enjoyed the lenght of it

@pabz04 Ай бұрын

Unfortunately my S3 got totaled last month. Debating between another S3 vs S4. I loved my S3. How have you been feeling/liking the S4 (I know - different comparison with your RS3 that you go over in the last minute of the video)? Love the videos! Thanks

@brentmc79 Ай бұрын

I have a stage 3 B9.5, but as far as the mounts/inserts, all I've done is the trans insert. How crucial was having a 2nd person on the motor mounts install? I tend to do everything by myself since most of my friends either have two left hands, or just aren't mechanically inclined at all.

@darrinscoilsclouds1498 Ай бұрын

do they all have an open front diff? i saw your boy playing with the wheels and I saw when he spun one one way the other wheel spun the other way 7:10

@jimmytran1870 Ай бұрын

Do you plan on doing resonator delete next?!

@Jacob-lr8zi Ай бұрын

Hey Cameron! Just wanted to say I really enjoy the videos! I wanted to ask a quick question about catless downpipes. I just bought one for my focus st after watching your video but I was wondering if it made it smell bad

@ChrizATX Ай бұрын

it will, you are getting rid of the cat which helps with the fumes that the car releases

@Jacob-lr8zi Ай бұрын

@@ChrizATX okay thanks for the info! Would you say it’s manageable or should I just leave the downpipe alone. Don’t want to ruin it’s drivability

@ChrizATX Ай бұрын

@@Jacob-lr8zi it should be fine, not really gonna mess with anything if installed correctly, just be careful if exhaust modifications aren't legal in your state as state troopers and cops will smell that really quick :)

@Jacob-lr8zi Ай бұрын

@@ChrizATX thanks man I appreciate your advice! And thanks for the tip 😂

@ryulee458 Ай бұрын

Dude you got to do a Mazda CX-5 Grand touring turbo or a cx-30 turbo zoom zoom lol 😂

@npw4484 Ай бұрын

Warm greetings from indonesia

@spyplane8 Ай бұрын

FYI they are called "triple square" because they are geometrically 3 Squares on top of each other creating a 12 point star. Four points per square * 3 :-)