Another great video Please post the link for the spring compressor
@performance_engineeringАй бұрын
@@teddiazjr.6223 glad you enjoyed it. Try this link, good quality springs compressors that don't cost too much - www.sealey.co.uk/product/5637175238/1000kg-2pc-coil-spring-compressor
@meliodasD2 Жыл бұрын
I'm usually not the biggest Audi fan but it turned out really nice!
@performance_engineering Жыл бұрын
Yea I do agree, looks very smart once lowered 👌
@thetruth5277211 ай бұрын
Top video mate! Thinking of doing the same to my S5 too. Cheers for the upload
@performance_engineering11 ай бұрын
Glad you enjoyed it. This setup really does look great for the S5
@samituomisto106 Жыл бұрын
Nice clean videa without all that hassle these usually is on those install videos 👍
@performance_engineering Жыл бұрын
Glad you enjoyed it 😁👍
@Ok-jf3nr Жыл бұрын
This video is nice and chilled 🤟
@performance_engineering Жыл бұрын
😁👍
@klasmvm4966 Жыл бұрын
Amazing video, this covers just how to do it with the least pain possible. One question though, will this work on a A4 without the factory lowering springs? Will it clear far enough when the springs are 25mm longer?
@performance_engineering Жыл бұрын
Thanks, hope it helps with your install. What I would recommend is, when you have to compress the spring, try and compress it slightly more to take up that extra 25mm then it should allow enough clearance
@craigkift3134 Жыл бұрын
Another great vlog nate ❤️
@performance_engineering Жыл бұрын
Cheers Craig. Need to pull my finger out and upload more frequently lol
@brianmcconnachie740011 ай бұрын
Just watched this video good work how much does the h ^r springs lower the car and what size of spacers thanks
@performance_engineering11 ай бұрын
Thanks 👍 they lower the car around 20-30mm and from memory I'm sure there is 12/15mm spacers in this. Hope this helps
@cicliolmo71526 ай бұрын
Top work mate. Do you recall if these were Sport or SuperSport springs ?
@performance_engineering6 ай бұрын
Hi, believe these are the supersports seats on this S5
@dongramlich3331 Жыл бұрын
Is the process the same as b9 rs5? I do also have the dynamic suspension. Thanks for your advice and excellent video!
@performance_engineering Жыл бұрын
Hi, thanks for the feedback. Yes the RS5 will be very similar if not exactly the same. Thanks
@RoadBlockNYC Жыл бұрын
Dope video 🔥🔥🔥
@performance_engineering Жыл бұрын
😁👍
@philipmcdonald2 Жыл бұрын
Good video 👍🏻👍🏻
@performance_engineering Жыл бұрын
Thanks 😁👍
@Abelsgarage_4 ай бұрын
Would this process work on a B9 SQ5 ???
@performance_engineering4 ай бұрын
Process will be very similar for the a SQ5 👍
@R1Custom7 ай бұрын
You mentioned you added spacers, can you recommend them/ or a brand that fits a 2018 Audi A5. Thanks
@performance_engineering7 ай бұрын
Hi. Yes that's not a problem, i supply Bimecc spacer kits on the online shop if your interested in purchasing a set. Www.performance-engineeringltd.co.uk
@tkendrick1 Жыл бұрын
Recently used your video to do a install on my 2023 a5. Does this affect adaptive cruise control when getting a fresh alignment ??
@performance_engineering Жыл бұрын
No I don't believe it should effect your cruise control. Maybe run a diagnostic report to see what faults come up
@Tangored55 ай бұрын
I'm debating whether I should get the 034 springs or H&R Springs. Which one would you recommend?
@performance_engineering5 ай бұрын
I use H&R on near every vehicle which comes in for lowering springs. 034 will probably give you the same stance but not sure on the ride quality
@adampacey9380 Жыл бұрын
Great video! Just curious, did you have to cut bump stops for this install?
@performance_engineering Жыл бұрын
Hi Adam, I don't cut bump stops on any lowering springs install. Either reuse the originals or sometimes H&R supply revised bump stops if required.
@adampacey9380 Жыл бұрын
@performance_engineering thanks for the info, and also fantastic video! I've got some H&R springs on the way for my b9 S5 coupe and will definitely use this video for assistance!
@performance_engineering Жыл бұрын
@@adampacey9380 Hi. Great to hear you enjoyed the video. Hopefully it helps you with you install, feedback how you get on 👍
@hlwilliams058 ай бұрын
Do you have torque spec for the different bolts? Bought a set of springs for my car and I’m looking to do it soon, but don’t want anything to come loose
@performance_engineering8 ай бұрын
I don't I'm afraid sorry. All the bolts are very hefty bolts so you will be fine tightening them up as tight as you can.
@eternal2k47 ай бұрын
How did you remove the orange from your headlights?
@performance_engineering6 ай бұрын
This is how they come from the factory in the UK
@johnkim93347 ай бұрын
Wht brand splitter do you have on the front bumper?
@performance_engineering7 ай бұрын
Hi. Not 100% sure but think this was Maxton splitter
@JulenAhletic97 Жыл бұрын
How many inches are the wheels on it? How low is the car after changing them? Thank you!
@performance_engineering Жыл бұрын
Hi believe they are 19s and lowered around 25mm
@TheIvan4680 Жыл бұрын
What number of the spacers you use at the s5
@performance_engineering Жыл бұрын
Used 15 and 12mm for this setup
@TheIvan4680 Жыл бұрын
@@performance_engineering 12 on front and 15 on the back
@performance_engineering Жыл бұрын
@@TheIvan4680 yes that's correct
@ryanowens3658 Жыл бұрын
What kind of spring compressors are you using?
@performance_engineering Жыл бұрын
They are just normal spring compressor mate, can be bought from most motor factors or ebay, amazon
@alexandruchiaburu5261 Жыл бұрын
how many mm was the car lowered? 20, 35 or 45? ive picked up 20mm ones for my a4 b9