i dont ever comment on videos but if there was one video on youtube i could say has genuinely helped me understand all of this it would be this one so thank you
@YummiyomiАй бұрын
I second that. Im learning now
@jafarolayiwolaabdulwaheed6208 Жыл бұрын
I've never found a video that's more comprehensive and simple like this one
@Mat_DanАй бұрын
This is the *FIRST* TIME I've listened to a tutorial, applied what it told me to do without a hitch and it worked.
@Mat_DanАй бұрын
almost forgot to mention that I'm french, and that I understood your instructions much better than all my previous french tutorials
@AWOL7753 ай бұрын
This video is amazing! It is easy to follow. The narrator speaks slowly and enunciates the directions. Thank YOU so much for making this concise and truly helpful video.
@thingsthatmakemego-ooh Жыл бұрын
This is the video I was looking for. Thank you so much 🙏 detailed step by step instructions because I am starting from no knowledge at all. Appreciated greatly 🙏
@AudioUniversity Жыл бұрын
Glad to help!
@DeBora4Bobby20 күн бұрын
Thank you for making these videos so easy to understand for those of us who are new to this and are just now learning and do not know the lingo! You are my favorite educator in this area.
@nicksmith85578 ай бұрын
Another excellent, clear and fast based lesson. Thank you for sharing.
@incrementum2218 ай бұрын
The tip from switching to TRS connectors just cleaned up my sound. Thank you so much!
@euricguerreroАй бұрын
dude your explanation was so clear without extraneous noise (pun intended). thank you.
@hamzazoudah704010 ай бұрын
This is the most helpful 7 minutes video I've ever seen ❤
@AudioUniversity10 ай бұрын
Glad to help!
@Dr.DivaMa4 ай бұрын
This video has simplified my life. Thank you so much, it was so clear as the sunlight!
@michaeltoombs45902 ай бұрын
This video was incredibly helpful. It showed me the difference between TS and TRS cables, solving my feedback issues
@TheUberSchattenjager3 жыл бұрын
Also - would LOVE to see you do a 'getting started with Reaper' as the web is full of older videos and the software has changed. but most importantly, you do such a killer job of explaining things, i think even a dummy like me could get to work with Reaper right away with your guidance. But we all have 'easy ideas' for other people to do, eh? ;)
@AudioUniversity3 жыл бұрын
That’s a great idea! The only thing that has kept me from doing it already is the vastness of what can be done in Reaper. What would you like to see demonstrated in a “getting started” video?
@TheUberSchattenjager3 жыл бұрын
@@AudioUniversity Booth Junkie has an interesting (but old) instruction format you might check out on Reaper
@AudioUniversity3 жыл бұрын
Yes. You can use one speaker, but you’ll probably want headphones for recording so that the backing track isn’t recorded by the vocal microphone.
@AudioUniversity3 жыл бұрын
Yes. An interface, a Computer, a mic, and a pair of headphones is all you need!
@anitanirmal272 жыл бұрын
True!
@ezemicheal78423 ай бұрын
Is there a way to like one video multiple times ❤❤❤❤
@rusticrichmusic24 күн бұрын
Excellent video! Most informative video yet.
@diab9lic756 Жыл бұрын
Gosh darn, I searched high and low and every video sucks except this one. Thanks man!!!
@FightStrong10 ай бұрын
This video is brilliantly clear and simple.
@Daniel-wu3vk5 ай бұрын
Amazing video❤❤ i only have one doubt.. is it possible to get output to external speakers without a audio interface from midi keyboard (I don't want a microphone)
@DobosSArpad5 ай бұрын
Excellent. Very clear. Concise. Images conveyed useful information. Appreciate it!
@Cr8MyLuck8 ай бұрын
I know my equipment I searched for a vid so someone would understand. This was 100% direct simple and correct. Took over an hour and finally lol. Thanks for your video I saved it and I never do that.
@obivee1862 ай бұрын
i finally understand now, all the other explanations were terrible, i can finally use the one thats been sitting on my desk doing nothing
@magicmoonmedicine5 ай бұрын
Thank you for being so clear for beginners.
@AudioUniversity5 ай бұрын
Glad to help!
@JellyGlows5 ай бұрын
@@AudioUniversitywith my solo it’s letting me hear game audio but no one in discord. My mic is working for them. I have it set as my input n output. I’ve set reaper up. I’m not sure what’s going on
@bzarone80632 ай бұрын
you deserve your flowers bro and i watched all kinds of videos i downloaded the file of the website and it popped up i appreciate you
@Psilocybvin2 ай бұрын
Dudeeeee, thank you so much on 3:45, I thought my mic was broken and was getting so frustrated
@ronfeggio10 ай бұрын
Excellent! Clear, concise and exactly what I needed. Subscribed
@tonydialsr71904 ай бұрын
Thanks so much for your instruction. I was totally afraid I might do something wrong.
@sirwhistlerАй бұрын
Best damn video yet. Thank you.
@Shimrakha9 ай бұрын
Audio University is right! My guy is a professor! Thank You!
@Whitepbass216 ай бұрын
Very informative! Thank you so much!
@plasmamig10 ай бұрын
This video is by far the best I’ve seen Thankyou💯💯
@johnsonolalekan78533 ай бұрын
It's that voice for me ❤😂thank you for the clear review ❤
@marklockhart75556 ай бұрын
Thank you so much, your video really helped me out. Love from the UK
@AudioUniversity6 ай бұрын
Glad to help!
@VivekTheMesmerizer Жыл бұрын
This is the best channel for healthy info of audio tech. Thanks a ton for the valuable stuff 😊
@internetdose31204 ай бұрын
I don’t have these, but I can say these steps are a complication..he explains well even I don’t understand things.
@Sunflowers-cj1xt5 ай бұрын
Wait wait so I can't use my USB headset if I get this set up for my mic? Or can I still just plug in my headset to my pc? I'm only doing this for better mic quality in my videos
@user-qr7ee2cp4y3 ай бұрын
Great info! Going to get an Interface but wasn't 100% sure I could use it for all audio output.
@GunDrummer Жыл бұрын
Thanks for the info dude
@jhfraser65 ай бұрын
I am requesting some guidance and hope I am taken the right route. This setup is for a small church to stream to KZfaq. We have a 16-channel analog sound board. My plan is to use the Focusrite Solo 4th generation to be the interface between the soundboard and a Win10 laptop using OBS. I am hopeful I can get some feedback on my plan. Your video is superb. You are masterful at explaining and providing the detail and explanation that so many others miss.
@vansh32359 ай бұрын
Should i power it from my pc? I'm scared it'll short my computer powersupply
@bestboy8977 ай бұрын
no bs straight to the point thanks
@derrickoliver38354 ай бұрын
Thanks 🙏 a million you’re dope!! Nice and simple and easy to understand with me having no previous experience with any of it but want to get started. I have maschine drum machine and software and Reasons it’s ten years old but I was told it doesn’t matter to still use.
@denissahin1080 Жыл бұрын
Hello can I ask I have bluetooth headphones is there any issues that can appear?
@yusufgultekin53132 жыл бұрын
Thanks!
@AudioUniversity2 жыл бұрын
Thanks for watching, Yusuf!
@rubymontoya67157 ай бұрын
This was so helpful! Thank you!!! ❤
@salsapicante74082 жыл бұрын
Amazingly well explained video- thank you!
@TANAPOL.Ай бұрын
this video really useful.
@murugan196015 күн бұрын
super nice explanation
@Rajeshkalambe Жыл бұрын
this is what i was searching on KZfaq..thanks buddy ..keep it upp....
@williamsyanes57747 ай бұрын
Excellent content bro, a new subscriber!
@richardlu67068 ай бұрын
This video is super well-put together, but I'm wondering - do interfaces not usually have some way to output audio directly through the computer speakers when the DAW is open, i.e. are headphones/speakers necessary? I've been struggling for several hours with hearing my guitar through my computer speakers, and I wasn't sure if I literally can't do that, and I need to have headphones/speakers to plug in using the 1/4 inch or RCA cables or whatever
@carpediemearth3 ай бұрын
What about connecting an interface to a guitar amplifier to use the amp as the output speaker? My amp has an aux connection
@HonorV2ultimate1tb4 ай бұрын
great presentation.... but only up to the speakers connect part..... so where does the Arturia keylab mk2 connect to?.... it wud hav been a complete picture for the dumb beginner like me.... i still dont know.... my guess is from the mk2 usb C....connect to the laptop's 2nd usbA port..... ?
@lbiggy25 күн бұрын
Would there be issues connecting headphones and monitors to the same focusrite?
@BrianMarcWhittaker22 күн бұрын
What about the master volume settings? 50% or 100%?
@Mat_DanАй бұрын
I thought I'd set the sound peaks just right, but in the end I didn't. The problem is that, on FL studio, I have no way of knowing whether "the peaks of [my] signal are about -18 to -12 dB" on the meter. I also realize that I've been given no way of adjusting the feedback delay when I installed my driver. Could someone help me here?
@MRH4U5 Жыл бұрын
If I have an audio interface with a single 1/4 input. Can I connect a Synth with separate 1/4 left/right line level outputs if I use a cable with separate 1/4 left/right TS ends and 1 x 1/4 TRS end?
@itsUndertaker-xd11 күн бұрын
i have a question, if i have connected speakers and headphones to the interface, and wanna hear the music from headphones rather the speaker how do i switch?
@jimnasticbeats2 ай бұрын
Nice video, thanks 👌
@snooopybrown2 Жыл бұрын
this video helped me a lot with everything thanks!😁
@maesl692 ай бұрын
The interface I use is the Native Instruments Komplete Audio 1, and I want to connect my gaming headset (I'll be switching to studio headphones soon). However, this doesn't work as intended. When I plug the 6.35mm jack into the headphone jack of the interface, I get sound, which seems great. But, my system stops receiving sound from the XLR line input until I disconnect the headphones. I've seen recommendations about "routing" the outputs and inputs correctly, but I'm unfamiliar with this term and unsure how to fix it. I hope someone in this great community can help me with this dilemma. Also, is it possible to turn a mono line input, into stereo by tweaking some settings?
@XandetheXande26 күн бұрын
HELP! instead of a heaphone, can I connect my guitar amp on the outputs intead: anything else I need to do?
@abbyinthewind4 ай бұрын
So helpful!!!
@LeftyPencil7 ай бұрын
3:48 if you dont see this area to select the input, press the red circle to Arm first - Reaper v7.07
@Christablaze.studios2405 ай бұрын
Thank you, you made it easy!
@mahi158962 жыл бұрын
Hey Kyle.Its great! Can you explain about different types of microphones and its properties and uses? Looking forward...
@AudioUniversity2 жыл бұрын
audiouniversityonline.com/types-of-microphones/
@mahi158962 жыл бұрын
@@AudioUniversity Thanks Kyle
@johngrannan4 ай бұрын
Jack plug on the left at 1:34 is TS not TRS? 🤔
@holt.s7Ай бұрын
I’m trying to connect my AT2020 USB mic to a Scarlett solo third gen 2in 2out 24 bit audio interface. Is this possible? Because at the end of the mic I see only a USB A and but the interface requires a 3 pin XLR? help!
@mawejjeronald5507 Жыл бұрын
Yes thanks for the video but i need drivers for scarlet now what should i do and were can i find
@AudioUniversity Жыл бұрын
Go to the Focusrite and look for the downloads for your interface.
@wanderingturtles5323Ай бұрын
so wait how is it getting 48v from a 12v USB input, does it get its power from the laptop/computer or is it an external power?
@tarcisiaemanuela7540 Жыл бұрын
This video is amazing thank you for you help 😊
@AudioUniversity Жыл бұрын
Glad it was helpful!
@TheUberSchattenjager3 жыл бұрын
my gear is coming today! much-apprecated info!
@AudioUniversity3 жыл бұрын
That’s exciting! What gear is on its way?
@TheUberSchattenjager3 жыл бұрын
@@AudioUniversity Focusrite 2i2, Stellar XT and Synco Mic-D2(will keep one) plus cables and mic arm! The whole kit and kaboodle
@AudioUniversity3 жыл бұрын
Nice! That’s a great setup!
@teriqphillips22 жыл бұрын
The GOAT
@Hayamaneko7 ай бұрын
What if I wanted to connect.regular.computer speakers to the audio interface?
@AwaaraMusaafir Жыл бұрын
I am using an audio interface with two mics for my podcast. Can someone please help me with a query? I want to record two seperate audio files for both the mics, how can I do that?
@AudioUniversity Жыл бұрын
Check out this video: kzfaq.info/get/bejne/gbmjqZplxpOrdXU.html
@AwaaraMusaafir Жыл бұрын
@@AudioUniversity Thanks a lot!
@sl53117 ай бұрын
What brought me here was to make sure my laptop worked with my 2i2 and my Presonus 5.25 monitors without low level hum from EMF or RF. If I understand you and others correctly, it is unbalanced cables that cause this? Thank you great video
@bhavikparmar9435Ай бұрын
I have laptop that support thunderbolt 4. Is focusrite thunderbolt asio better than regular focusrite usb asio if i use thunderbolt cable ? Will it give lower latency?
@kouchkastar98185 ай бұрын
perfect explaining ever ♥
@nickhell8 ай бұрын
I have a condenser mic and a focusrite Scarlett solo. If I go over 11 o'clock in the gain I get a lot of noise. Like white/pink...
@lucasalegno1037Ай бұрын
Hii, i have a question. If I don’t connect speakers does it work? Because i want to record only
@takeflightleakz84496 ай бұрын
How can i connect a home theater subwoofer with this?
@VernLee-y9q29 күн бұрын
thank you
@SiLentAssassin107 ай бұрын
If I hook the speakers to the audio interface, would I need to hookup the power cable on the speakers as well or am I getting power from the audio interface? Thanks
@AudioUniversity7 ай бұрын
You’ll need to use active monitors or place an amplifier in between the interface and passive speakers.
@tharii3146 ай бұрын
I used to solder jacks to make barrel adapters myself but I am sure that something I buy lasts more than whatever I'm cooking😅
@grantm902 Жыл бұрын
Balanced->Unbalanced can lead to a -6dB reduction in signal, depending on the input design
@brendenpettit99894 ай бұрын
so what if i don’t have a place where the trs quarter inch cords go into my speakers? am i just done?
@luluester8 ай бұрын
The mic’s not connected, I had this issue before, but I don’t remember how I fixed it. The interface is on, but all I can hear is just a white noise sound
@sildz10272 жыл бұрын
Thank you. This is really helpful!.😊
@ArrakisOCE5 ай бұрын
Please tell me how I can add an FX loop of guitar pedals (for insertion as an effects BUS in the DAW)? I don't use an amp - only software sim.
@AudioUniversity5 ай бұрын
Check out this video: kzfaq.info/get/bejne/idCqoKdo16rPXYE.htmlsi=yT1TVephG2qetdrg
@ArrakisOCE5 ай бұрын
Thanks, that is another great video. I've looked into the Radial EXTC already which would be perfect if it was also an interface or could send and receive audio to the DAW via USB. I am using an Apogee Duet as my main interface for guitar in and studio monitors out and have no spare inputs or outputs, therefore trying separately to find an interface that I can use as an outboard FX loop for my pedal shelf/rack - for routing to the DAW as an insert (ideally two channels so I can run pre and post amp pedals via a remote MIDI switcher). The closest thing I have found is the Boss IR-2 although it seems a waste to only use it as an FX loop and I don't know that I can disable both its amp and cab sims together. I might have to bite the bullet and get another primary interface with more IO as well as a reamp box as you suggest. Thanks again, great channel. @@AudioUniversity
@jcstevegigs7 ай бұрын
I'm trying to hookup a Focusrite 2i2 to my new MacBook Pro using Reaper as DAW. I've changed settings on Reaper and MacBook to "Scarlet 2i2" but I can't get sound from microphone. Mic is working and changing levels on MacBook but nothing on Reaper. It's just not working. Any ideas? Thanks
@hazejuandemarco1536 ай бұрын
Thanks broski
@Ions114 ай бұрын
Can anyone point me in the direction of a tutorial that describes how to record simultaneous DI and "wet" guitar tracks? I"m using a Scarlett audio interface, a DI box and amp modelling software. I basically just want to record a simultaneous DI track when I record. A simple diagram/setup explanation would really help.
@mahuubao Жыл бұрын
Excellent ... well done ...
@AudioUniversity Жыл бұрын
Thank you!
@howardnphyllis3 жыл бұрын
I was able to get sound from my PreSonus AudioboxUSB 96 to headphones, THANK YOU!! Does this work in Ableton also and how would i connect my interface to my Yamaha MG10XU to my PC to record vocals and instruments? Appreciate the great tutorial , yours was the only one I was able to follow and actually work with headphones...!! Now i need to "funnel" my mics>mixer>RC-1 loop pedal> to DAW to PC speakers. The settings in Ableton to make this happen are a little confusing due to my lack of experience. I wouldn't be opposed to a video call...?
@tienomano59863 ай бұрын
Bonjour j'ai une scarlett solo 3eme g et je voudrais brancher mes enceintes Yamaha hs4. Quel cables dois-je utiliser des TSR ?
@estrellas.4418 Жыл бұрын
THANK YOU!! 🙏💖
@mavrickfaldo8866 Жыл бұрын
Thanks bro 🤜🤛💚🏴
@AudioUniversity Жыл бұрын
Thanks for watching!
@tohoanguyen22755 ай бұрын
Thank you for sharing!🌷🌷
@TheSilverConductor7 ай бұрын
I MusicLuv It! You have made this all make sense 😎Keep Doin Whacha Do! THE SC.
@theRealityPodcastwithAlex5 ай бұрын
Very good
@armandotorres-iy1cw4 ай бұрын
im recording with my laptop camera using the volt2 for audio.....do i need to use ableton? im able to record both audio and video at the same time.....im not sure ifi need to use ableton....