Autel For The Win (factory radio Theftlock reset)

Рет қаралды 61,942

4 жыл бұрын

This video is more of a behind the scenes with the Danner family, with a little radio reprogram in the middle. Use my AESwave tool link, www.aeswave.com/ScannerDanner... if you are interested in this Autel or many other diagnostic tools that I am using. I earn an affiliate revenue, that I am pouring right back into the automotive community via tool grants with a matched contribution from AES!
ScannerDanner Tools:
www.scannerdanner.com/tools.html
www.amazon.com/shop/scannerda...
For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium www.scannerdanner.com/join-sc... There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!
Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC.

Пікірлер: 348

@ScannerDanner 4 жыл бұрын

This video is more of a behind the scenes with the Danner family, with a little radio reprogram in the middle. Use my AESwave tool link, www.aeswave.com/ScannerDanner-c512/ if you are interested in this Autel or many other diagnostic tools that I am using. I earn an affiliate revenue, that I am pouring right back into the automotive community via tool grants with a matched contribution from AES!

@jamespower5520 4 жыл бұрын

ScannerDanner . What Autel did you use? MS 908 ?

@timowallin8020 4 жыл бұрын

Hmm, i wonder is Autel's selling name different here in EU? PS. Edit space between the link and the dots and the link will work again ;)

@ScannerDanner 4 жыл бұрын

sorry, I fixed it

@ScannerDanner 4 жыл бұрын

this was the IM608

@thirdeye530 4 жыл бұрын

Laughed my ass of when you read "Regular Production Option (RPO) Code. What does RPO stand for?" 🤣

@throttlebottle5906 4 жыл бұрын

jah jah, LMAO

@dlchino220 4 жыл бұрын

regular production option

@thirdeye530 4 жыл бұрын

I dont think you get it, Douglas...

@muhammedsons2675 4 жыл бұрын

hahahaha tell him what is the short of regular production option

@zadeanrobinson1608 4 жыл бұрын

Absolutely love the relationship between you and your son 😊

@ScannerDanner 4 жыл бұрын

😊 thank you

@PedroGonzalez-yr6xd 4 жыл бұрын

Hi, how are you? I am a faithful follower of your channel. Although my English is very bad. I rely on a translator to understand. You are an excellent teacher. Thank you very much for sharing your knowledge. I am already subscribed to your Premium channel. SHEET WITH SPANISH SUBTITLES. IF YOU WOULD HAVE MORE FOLLOWERS. REMEMBER THAT SPANISH IS THE SECOND LANGUAGE SPOKEN IN THE WORLD.

@PedroGonzalez-yr6xd 4 жыл бұрын

From México

@markchidester6239 4 жыл бұрын

@@PedroGonzalez-yr6xd Hello Pedro, Paul is not only a great teacher but also an amazing person as well. If you were able to learn English fluently, you would like him even more. The emotion in his and the people he is with make it not only interesting and educational, but fun to watch. You don't get board, you smile a lot and that really keeps it going. Keep up the education my friend!

@shaneroberts333 4 жыл бұрын

Paul!! You are the greatest!! I was a new auto mechanic after fixing heavy equipment. You have given me more tools, more confidence and more fun in this career than any other I’ve come across. I subscribe I have your books and I’m a premium member. Keep up the good work and keep having fun!! I love it!! God bless you brother!

@dopportunitychannel1294 4 жыл бұрын

It's so much fun learning with these guys. The humor really adds up color and entertainment...

@30kendel 4 жыл бұрын

Family working on cars!! Family bonding....loving it! Wish I can get my mom and sister to help me with my car!

@isalmankhan1 4 жыл бұрын

Love the humor between SD & Caleb😍 Reminds me of the days when I used to work in my Dad's garage, really Miss those days You Guys are Awesome😎 Plz do some videos on programming with Autel IM608👍 Stay Blessed & Safe Guy's❤

@billyyoder8171 4 жыл бұрын

Thank you three Amigos Danners. Have a blessed and safe week to you and your family.

@fabianthorne6831 4 жыл бұрын

Another great video from Scanner danner and Caleb ,we always learn a lot from you,love the way you teach us really appreciate it,God bless you all and y'all keep safe ,peace.

@wyattoneable 4 жыл бұрын

The candid conversation was awesome. ASE wave and you are doing a great thing by helping others.

@ScannerDanner 4 жыл бұрын

I appreciate that! Thank you

@tracydiller9378 4 жыл бұрын

Another great video by the Danner boys. Keep them coming guys.

@johnhnetkovsky8917 4 жыл бұрын

G.M. guy here shaking my head,and chuckling ! Good video Paul,very entertaining with the family vibe.

@ohboy2118 4 жыл бұрын

I'm in the UK so purchasing for me is a non-starter but for those that are in the US the fact that you are taking the affiliate proceeds and pushing them back in to a worth cause is kudos to you 👍

@ScannerDanner 4 жыл бұрын

thanks my friend, just want to help out and give back to my community and it feels good to be able to

@robertmedina6875 4 жыл бұрын

Great video Paul! I am on chapter 10 in your book! Following along on Scannerdanner premium! I love it! God bless!

@JaredHIll13 4 жыл бұрын

Hey SD I bought your book over a year ago when i moved up from the grease rack at my local GM dealer. I have now surpassed all other techs in the shop on diag, and I used to have basically 0 electrical know how. Even my service manager goes out in the lot to scan codes/sell parts... not if I have anything to say about it. It is really satisfying to fix a multiple come back car the first time it hits my bay, or take all the hip-shot parts back to the counter and tell my manager I found a short to ground and I have no need for his parts (then he gets no commission)lol... The way you explain things really clicks with me. And I keep the book in my toolbox for ref. God bless your fam. and stay vigilant.

@ScannerDanner 4 жыл бұрын

Thank you so much! Would you mind putting this feedback on my website? I would appreciate that so much www.scannerdanner.com/leave-read-feedback-new.html

@JaredHIll13 4 жыл бұрын

@@ScannerDanner You bet man, Ill do it right now... heck Id make a commercial for this stuff lol..

@johnturner8829 4 жыл бұрын

Learned a little something and had a good chuckle. Thanks guys.

@daviddake22 4 жыл бұрын

It’s always great to see danner in videos

@DanWallis86 4 жыл бұрын

Always awesome videos mate.

@BDauto86 4 жыл бұрын

Caleb absolutely does a great job even with a manbun lol. The green man video was great and this video was funny good job guys. Glad to know Autel will do that, I see alot of older GM's. Thanks for sharing.

@ozzstars_cars 4 жыл бұрын

Gotta have jams in the whip! I always enjoy the dialect between Paul, Danner and Caleb. RPO (Regular Production Option) is a big deal in the Corvette world I live in. People can be fanatic about it!

@nigelstringfellow5187 4 жыл бұрын

Great video guys cheers from Down Under

@TheEvilMechanic 2 жыл бұрын

Just stopped by to say thanks for this video. Had to change the PCM and the DIM on a 04 Cadillac CTS and the radio went into theftlock. Never would have thought to use my Autel to unlock the radio. Thanks again. Forgot to mention I used a MaxiPRO MP808TS .

@ScannerDanner 2 жыл бұрын

awesome, glad this helped, thank you

@juanportillo2201 4 жыл бұрын

You guys are the best!

@Pablo_Automotive 4 жыл бұрын

Great again Paul thanks for share It's alwais wonderful

@jamespower5520 4 жыл бұрын

You guys are a heap of fun ! 😀

@ScannerDanner 4 жыл бұрын

always fun with my brother and son around, thanks!

@edwinbrewer1789 4 жыл бұрын

Oh man I live this!

@markchidester6239 4 жыл бұрын

I woke up to a new SD video and thought I would have a chance to win an Autel! Woo hoo! Got some coffee in my SD cup and went to the garage to watch. Ah, now that I'm awake, I get it. Fun video Paul! That was The Scorpions by the way. Song called "No One Like You" I believe. Saw them with Def Leppard back in the 80's. Great show!

@3chic3ro 4 жыл бұрын

hey Paul you pronounced the word Mexico very well 👏🏻

@ScannerDanner 4 жыл бұрын

I tried :-)

@austinjohnson159 4 жыл бұрын

You guys` new camera is awesome. Keep up the good work

@ScannerDanner 4 жыл бұрын

Thanks! Will do!

@orfeous 4 жыл бұрын

Amazing good image quality on this one! Cinematic with 24fps

@danman9017 4 жыл бұрын

you guy have great spirit thanks

@user-su3dw5cq9f 4 жыл бұрын

Thank you, thank you. Follow you from Saudi Arabia I like people who teach others things that benefit them, no matter how national, ❤️❤️

@ScannerDanner 4 жыл бұрын

you are welcome brother

@jamesmackie9292 Жыл бұрын

Love these videos 🤣 just banter always through haha

@sergesimonov1767 4 жыл бұрын

Nice to look at the cheerful brothers!

@jcmobilediagnostics8611 4 жыл бұрын

I thought you were done with evaps! Looking forward to it

@ScannerDanner 4 жыл бұрын

it is actually a really really good one, something I have never seen before

@kirkabrahamson1148 4 жыл бұрын

Awesome video. Good to see this family vibe every so often. Great editing cameraman Caleb. But the old man's right (SD) about the man bun lol. In my opinion, there is no such thing haha. Stay safe with all the crap going on over there. Look forward to the next one.

@salvadorgutierrezr5914 4 жыл бұрын

Thanks for the video Scanner Danner, and son Caleb👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@joehomanick 4 жыл бұрын

Great video Paul . Have dinner swap the front face on the radio so the customer can have the nice buttons

@jdtractorman7445 4 жыл бұрын

Back in the day when I worked for a subsidiary of GM, you had to press and hold preset stations 2 and 3 simultaneously and wait for a four digit code. Then once getting that I believe there was a 1-800 number we had to call to get the unlock code. I think after that you just press the preset numbers corresponding to the code and it would unlock. 15:25, seeing you do that reminds me of a day I had to fish change out of a cd player in a customers car, they have kids, apparently. RPO means regular production option, I cheated and looked it up.

@midnight-xpress1136 4 жыл бұрын

I had to do that procedure for a 97 suburban.

@jonathanshagoury338 4 жыл бұрын

This had me laughing, that quarter in the radio, hilarious.

@SmittySmithsonite 4 жыл бұрын

I got you beat, Paul - I went 2 years on an expired sticker, lol. Then I got yanked by the fellas on a Sunday afternoon - had to get one after that, lol. Lucky for me, I forgot to plug my Range AFM disabler device back in after the test, and the monitors ended up running for the first time in 2 years! Worked out well. Saved me a $50 fine and SIX year insurance surcharge (welcome to MA ...). Caleb only gets a pass on the man-bun, because he's your son, Paul. And we like him ... and he does a great job editing. 😁 Used to love that band - Suicidal Tendencies. I still remember that song you mentioned - I had these Pioneer truck boxes behind the seat of my S15, punching me in the back from the bass in that song, lol. I still remember the looks I'd get from adults whenever I came whipping into a parking lot just about on 2 wheels, with the windows down & radio cranking that band on TEN. I was such a punk! 😂 Heard some Scorpions, No One Like You there, too! Sweet!! Back when music was good! 🤘😬🤘 😁

@nicknicu1787 4 жыл бұрын

Hey Paul,I've been telling you Autel rocks...👍

@sinegra30 4 жыл бұрын

Amazing video thank you! I guess that radio has coins inside, kids use to stick them inside while playing

@ScannerDanner 4 жыл бұрын

You are right!

@InsideOfMyOwnMind 4 жыл бұрын

Yeah I think I would pop it open and get it out of there. When we start having our money made in China out of plastic it won't matter so much.

@kevinedward1234 4 жыл бұрын

Paul, Caleb, great video!!!!!!!!!!!!!

@ScannerDanner 4 жыл бұрын

Glad you enjoyed it

@suntoritime 4 жыл бұрын

Your brother's beard is magnificent.

@cyberslacker5150 4 жыл бұрын

That's what I've been telling all of my mechanic friends! To get an Autel scanner instead of a Snap-On or a Mac. They're just making the tool truck guys rich. But because the don't listen to me, I go and charge them to do programming with my Autel. I do programming on cars all the time, and I use the Autel almost exclusively. . I've had an Autel for some time now and for a long time I assumed the Snap-On did programming too, like radio programming, key programming, module matching. And I slowly learned that it doesn't do all those things, even though it's a lot more expensive than the Autel. Although the Autel doesn't have built in connector diagrams or a scope, I feel that it does much more of the IMPORTANT stuff. Like program keys, match immobilizers, oil resets, etc. Oh, the list goes on and on. Also the Autel is Android based, while the Snap-On is Windows based. Android is much more stable. I use it as an Android tablet, with KZfaq, Skype, Chrome, etc. All of my car documents are stored there also. If they're were priced the same, I'd still go for the Autel. I feel the Snap-On does little for me. The updates are much more cheaper than the Autel. Danner, I'm glad that you finally gave the credit to the Autel that it deserves. You should have used this scanner a long time ago. The Launch is also a good scanner that does similarly what the Autel does. Great video, Thanks! PS. Kaleb looks cool with long hair.

@hillbillyrigrepairs1814 4 жыл бұрын

cyberslacker5150 Which model Autel do you run? And do you regularly use a “pass-thru” device? You almost need both an Autel and a snap on scope for mobile diagnostics..$$ I miss my Autel for sure!

@markchidester6239 4 жыл бұрын

Do you have to update annually? Hear that you do to keep it working. That keeps me from buying one as I would just use it for personal use. Help some friends out also.

@allanb3222 4 жыл бұрын

@@markchidester6239 Depending on the model, you don't have to update it every year. It'll still function as normal, but you won't be able to do newer vehicles as they come out, until you buy the update again.

@colestowing8695 4 жыл бұрын

@@hillbillyrigrepairs1814 +1 to that comment. I'd be curious to know what model he uses as well (also, anybody else that has some experience with them feel free to chime in. what are you using)

@TheMrgonzo76 4 жыл бұрын

RPO - Regular Production Option is consisting 3 alphanumeric characters

@bwest-yq3uc 4 жыл бұрын

Regular Production Options should be found on the service parts identification in the glove compartment, on the trunk floor or inside the driver's door panel.

@matthewzoelle9149 4 жыл бұрын

We have been doing Veh inspections the whole time. Philly Pa.

@kurtkennedy5370 4 жыл бұрын

Mathew for the win!! He bails me out at least once a month lol

@Blazer02LS 4 жыл бұрын

FYI Uplevel in GM speak is anything above the base AM/FM radios they use in the base vehicles. So if it has a tape deck or CD it is considered uplevel. RPO UL2 won't be in a US or Canadian sold vehicle. It is there because other countries use a different band spread for their radios and that option sets the radio to match those station settings. For instance in the UK most radio stations are even numbered so you can have station 102.2 but not a 103.3. Like most of the non-snappy scan tools that cover most of the makes in the world the Autel has the ability to deal with global vehicles in cases where that is applicable. RPO UC6 is the 6 disc CD changer option.

@NoWr2Run 4 жыл бұрын

I have a 97 Jeep G.C. bought new, I had a noise in the dash when taking off hard or stopping hard. Dealer could not find it ? Around year 2000 I had enough of this noise & when I removed the radio ( BOOM ) just like the one u have something loose around in there ? Took me about half an hour but finally a short drywall screw fell out through the tape player slot. NO IDEA HOW IT GOT IN THERE SINCE IT WAS NEW ?

@HouseCallAutoRepair 4 жыл бұрын

Too many people think this whole virus thing is everything BUT real, and SERIOUS. They're lucky to be alive, so far. Be SAFE, be smart, be real. Love ya Paul! Reality sucks, but getting sick sucks more. If you don't care about yourself, that's one thing, but realize how your decisions affect others... (Not directed at you Paul... But the viewers)

@ScannerDanner 4 жыл бұрын

the virus is real, shutting down the world, and putting millions upon million of people out of work was a sham

@HouseCallAutoRepair 4 жыл бұрын

@@ScannerDanner mixed feelings on the complexity of the "sham". Having not gone that route would have cost MANY more lives.... BTW... I walked off my "essential" job because of lack of compliance by coworkers... Risking my health is not/was not THEIR choice to make. Now I'm turning wrenches exclusively.

@fascistpedant758 4 жыл бұрын

@@HouseCallAutoRepair It's not saving many lives. It's just flattening the curve. The virus will eventually make it's way around before we develop a vaccine and do whatever damage it would have done anyway. If you're vulnerable, isolate yourself, otherwise let nature take it's course.

@HouseCallAutoRepair 4 жыл бұрын

@@fascistpedant758 Flattening the curve IS TO SAVE LIVES (otherwise what was the point?) If we DIDN'T flatten the curve the HOSPITALS would have been so over run that there would be dead people at their door. CAUSE AND EFFECT

@viojamago4576 4 жыл бұрын

been a GM middle east technician for 8yrs, and its common to most GM vehicle to ask RPO codes when you do programming or just scanning using MDI or tech2

@throttlebottle5906 4 жыл бұрын

someone having way too much fun both editing and recording lmao

@mohammadkafil7841 4 жыл бұрын

Thanks a ton special

@James-fs4rn 3 жыл бұрын

👍u guys are awesome!

@bigmotor3845 3 жыл бұрын

Wow! This thing is killing my Snapon tool!

@isaacdelgado7811 4 жыл бұрын

Thanks good video

@ScannerDanner 4 жыл бұрын

Glad you liked it

@JoseRivera-js5vd 4 жыл бұрын

I remember doing a 2010 impala radio with a snapon solus.

@michaelrobson5480 4 жыл бұрын

Cor! now this motor vehicle is deliciously HubNut-esque.

@timekeeper5275 2 жыл бұрын

You got an awesome son! The fact he said he doesn’t want to be political! 👏👏👏 that shows true character.

@Don-ym8cm 3 жыл бұрын

Hi. I have a question. Will you still have injector pulse if there is no pressure at hi pressure pump on direct injection injectors system?thanks

@kevinhenry9622 4 жыл бұрын

Scannerdanner question I am planning to buy the launch x431v+ and the hd heavy duty equipment with it also how u rate the launch scanner over autel r anything else u work with and again where u get all ur wiring diagram/ workshop manual

@shauno3697 4 жыл бұрын

I want to add something to the learnums with the RPO codes. I'm sure everybody saw Paul digging in the glove box for that tag. Other places to look for that tag is in the trunk area floor, the covering for the trunk spare tire might have it on its bottom, any of the door pillars, and the bottom of the trunk lid are all places to go looking for that damn tag. It varies a lot between the different flavors of GM junk. One thing I discovered while doing an alignment, of all things, is that the tag might not exist at all anymore starting in 2018 on some models. (Maybe 2017 in some cases?) You can still get the RPO codes though. If your smart phone doesn't have a QR code reader built into the camera, get a QR code reader app installed and scan the QR code on the VIN tag. GM usually still keeps that on the driver's side B pillar. Once it decodes, it will give you the full RPO list for that vehicle.

@romethepacifist3222 4 жыл бұрын

Your son has the same smile ass his grandma bro 👍🏾

@PhillyDee215 4 жыл бұрын

Lol🤪 and I've been intrested in Autels for a while now👍

@michaelsieber6601 4 жыл бұрын

Definitely want to pick up an autel

@colestowing8695 4 жыл бұрын

@@michaelsieber6601 indeed. It looks like the prices went up substantially since the last time i looked at them though? perhaps because now they're actually paying licensing-if so the price increase is understandable (or maybe i'm just remembering things incorrectly). Anyway...Paul if you see this, can you tell us which model you use? Edit : finished reading thru the comments and realized you already answered this question. (for anyone that missed it - Autel im608)

@hvacr24 3 жыл бұрын

Michigan doesn't do inspections, it's real nice. especially from a new yorker

@patelvivek4888 4 жыл бұрын

Autel makes u Pro MAN 👍👍

@Resistolitin 2 жыл бұрын

He said 《Mejico》 🙌🏾🙌🏾🤣🤣

@billyr9840 4 жыл бұрын

Nice !

@jimkillen1065 4 жыл бұрын

Appreciate the info yea the social distances lol

@speedsportauto3glude 4 жыл бұрын

Bug up Scanner Danner, big up Autel

@Jose-qm1hh 4 жыл бұрын

Good afternoon. I have a question about autel scanners. Is that scanner Autel IM608? I currently have Autel Maxisys Elite. How different is from Maxisys Elite from Maxisys IM608? Will Maxisys IM608 will do more functions on engines and transmissions?

@mikechiodetti4482 4 жыл бұрын

You got it working with Regular Production Option or RPO.

@OxaudioPhilly Жыл бұрын

Which autel Is this? I have a maxidas 708 but i think it’s time to upgrade. Need something to handle cars after 2014 and to unlock gm theft lock

@geraldmartin3625 4 жыл бұрын

ScannerDanner Paul I have an Autel mx808 entry level scan tool that will not communicate with all modules on a 99 chrysler sebring. It is in theft deterrent mode and I am trying to help a friend get it running. Any advice?

@Toyotas_n__Tools 4 жыл бұрын

My mom had a 1991 saab 900 which she had to go through some crazy ordeal to get it to work again after it was pulled from the dash for a repair.

@bwdz75 4 жыл бұрын

RPO codes often in glove box or by the spare tire in trunk. Haven't seen a Montana in ages so don't remember where it's at

@weldingjunkie 4 жыл бұрын

Danner said that in the video. Correct

@bwdz75 4 жыл бұрын

@@weldingjunkie Yeah, I didn't watch it to the end, looked at it again. Thanks

@KasparrTV 10 ай бұрын

4:56 I see ya Danner. I see ya.

@devautoelectronics 4 жыл бұрын

Hi SD ... JUST a question, you have maxi IM, this tool can write VIN and can code new hardwares to vehickes?

@ScannerDanner 4 жыл бұрын

This tool does way more than what I've used it for so far but yes, it can

@devautoelectronics 4 жыл бұрын

@@ScannerDanner thanks a lot your reply👍

@f.c.urbaytis3599 4 жыл бұрын

1: your videos are extremely helpful. 2: you guys are freakin hilarious 3: suicidal for life!!!!!!

@yaseenhashim8538 4 жыл бұрын

thanks

@hillbillyrigrepairs1814 4 жыл бұрын

Great editing! Caleb, you should go to school for all that computer stuff.

@TheWizechatmgr 4 жыл бұрын

We've all forgot at some point to have an inspection done. With all the barber shops closed, it's gotten really ugly out =P

@kevinhitchcock7062 4 жыл бұрын

What model Autel scanner is it

@johnaclark1 4 жыл бұрын

You can actually get all the logos for the manufacturers. The logos are loaded but the new ones added in which take precedent when it boots up. It's simply a matter of going in and deleting the "new" logo files and it will then display the proper logos.

@eliteautorepairrcsd2008 2 жыл бұрын

i am wondering if that autel maxisys ultra will program ecu's like they claim it will. looking at buying it just want you opinion thanks

@ScannerDanner 2 жыл бұрын

It will but you still need a laptop to run the pass through device and then pay for individual scripts from the manufacturers

@Speedstack21 3 жыл бұрын

I have a Maxisys elite and get more frustrated than not when it can't perform certain functions. Is that because the option isn't available on that particular model car, or a problem with the scanner itself?

@ScannerDanner 3 жыл бұрын

hard to say without being there my friend

@supercoupe6288 4 жыл бұрын

I've seen RPO stickers on passenger door end on GM vehicles

@throttlebottle5906 4 жыл бұрын

passenger door, glove box, driver door, under rear/trunk carpet over beside spare tire well, behind snap out panels in rear, other places I cannot think of off hand lol

@craigtice3693 4 жыл бұрын

Haha. That was a great video.

@ScannerDanner 4 жыл бұрын

Glad you enjoyed it

@craigtice3693 4 жыл бұрын

@@ScannerDanner I for one enjoy getting to know you and Caleb and Danner. Makes the vidoes that much enjoyable to watch when you also know who's teaching it and the heart/thought process behind it. Keep up the great work.

@jamessalter4747 4 жыл бұрын

Hey yo Caleb!! (I hope i spelled your name right) If you're editing these, it appears you've been watching some 'all gas no brakes' on instagram. If you haven't, definitely check them out. Their editing style is very similar to yours, and in either case, it makes for a more amusing video. Props dude, your filming and editing has come a long ways. This video is a great example, what could be more mundane than a radio reprogramming, and yet you've got people watching and enjoying the video, myself inlcluded! P.S. wtf is an inspection..? It doesn't seem like you're referring to a smog check? Is this some rust-belt specific vehicle regulation to make sure your brake lines aren't on the verge of rusting through or something? Keep up the good work guys! I appreciate it all!

@jcsanchez0123jc 4 жыл бұрын

Bonita familia,,son muy divertidos ; )

@kingbolen_official 4 жыл бұрын

Autel produce nice tool

@lankanapi4324 2 жыл бұрын

Hi Mate, Is it safe to order a scanner from ali express autel official store?

@fire7765 4 жыл бұрын

ZZ top is back

@gino2033 3 ай бұрын

Can you tell me which programer scaner to unlock my Pontiac firebird Delco radio LOC

@ScannerDanner 3 ай бұрын

Yeah, this one 🙂

@rodx5571 3 жыл бұрын

Ahhh, Danner, quoting Psycho Mike and the boys, you just gained 2 more points on the cool scale, and you were already in the cool zone.

@UNEEK_LOGIK 4 жыл бұрын

Theirs no one like YOU!!!..... Danner What does RPO stand for .?. The damn scanner was showing you in you face... lol Regular Production Option

@UNEEK_LOGIK 4 жыл бұрын

BEST videos y’all put out when you & Caleb are joking around

@alikareem1997 2 жыл бұрын

You did not explain how to enter the settings because you did not say the options you chose and there is a cut in the video so I do not know how to get to the raido option