Auto body filler tips and techniques for a laser straight repair. diy auto body

Рет қаралды 117,767

Жыл бұрын

In this episode, I'll share how to mix ,apply, and block sand auto body filler for laser straight results. Along with some helpful tips and techniques that will make achieving pro results less frustrating and time-consuming. I also talk about the best uses for glazing putty.
My amazon affiliate store : Tools and materials categorized to help you find what you're looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
In this video
⬇️⬇️⬇️⬇️⬇️⬇️
velcro to make hook n loop blocks
amzn.to/3to5UPJ
3m lightweight body filler
amzn.to/3X1JwsP
sprayIQ Disposable mixing cup compatible with 1.0 system
amzn.to/3hHCwkA
upol 2k primer DTM
amzn.to/3QVPcRR
body filler rasp
amzn.to/3BtXkDR
80 grit hook and loop sand paper
amzn.to/3J2mJGY
320 hook and loop sand paper
amzn.to/3PtUGme
round sanding block
amzn.to/3aSzXJy
dry guide coat
amzn.to/3oD6CGx
evercoat plastic honey
amzn.to/3Po1Rw0
clean sheets mixing board
amzn.to/3rfoeK7
dura block kit
amzn.to/3PE8DNO
motor guard flex block
amzn.to/3JxTUR6
prep solvent
amzn.to/3O3JrR3
Auto body line maker tool
amzn.to/3KxzusJ
mirka dustless sanding system
amzn.to/2Y5h2VE
Icing glazing putty
amzn.to/3iPXVG5
3m Performance paint gun
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
amzn.to/3scqGAf
If you find this video helpful, be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
SUPER THANKS button
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Go pro 7 black
amzn.to/35ddyAf
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Acer Nito 5 laptop
amzn.to/3wvc2W0
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
how to save a bad paint job
• How to save a bad pain...
How to repair and paint your bumper
• How to save money pain...
How to remove fisheyes from your paint job!
• How to remove fisheyes...
How to save a bad paint job
• How to save a bad pain...
Disclaimer:
Due to factors beyond the control of garage noise, it can not guarantee against unauthorized modifications of this information or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair videos. Due to factors beyond the control of garage noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again, any injury, damage, or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not garage noise.

Пікірлер: 89

@robertcharlton1551 Жыл бұрын

Love to watch you take a big dent a bring it right into shape. Keep up the great teaching!

@GarageNoise Жыл бұрын

Thank's Robert! appreciate the support!

@helisean10 Жыл бұрын

I find that one of the most important things with filler is to know when to stop sanding and either apply more or change to a finer grit sandpaper. When I first started I would usually sand too much off for the first 1 or 2 applications and work more than I needed to

@GarageNoise Жыл бұрын

In my experience that's the biggest mistake beginners make for sure and it turns into a vicious circle .

@Easy-Peazy Жыл бұрын

Sometimes You have to be a bit careless to get things done perfectly 😂

@CounterPunchNation 8 ай бұрын

This is the story of my life! 😂

@jamescon55 11 ай бұрын

NICE work, guy 😏. One of the better/best vids on THIS exact topic that you demonstrated. VERY informative. Over 30 years experience here (mostly hobby but, also for a little extra 💸for a few years too, mostly classic car/truck restoration, some collision) and ALWAYS learnin. You made that fender repair look fairly easy with some definite extra pointers that will help my future experience on some of those pesky curved body lined fenders/quarters/doors etc. TY and subscribed. Happy Restoring and Cruizin 😎🤘🔥🤘

@GarageNoise 11 ай бұрын

I appreciate comment brother! Thanks for the sub and welcome to the channel!

@jaseindigo Жыл бұрын

i build drift cars so by no means do i expect perfection with my projects BUT this is still wildly helpful. gotta pick up one of those flexible blocks asap!

@GarageNoise Жыл бұрын

They come in handy! Appreciate the comment and support!

@hamzakarim2138 Жыл бұрын

good work brother we need more videos like this awesome !!

@GarageNoise Жыл бұрын

Thank you! Keep watching I'll keep making them! Appreciate the support!

@huey8431 Жыл бұрын

Always learning from your great content!

@GarageNoise Жыл бұрын

Thanks brother!

@robertgrlic6505 Жыл бұрын

Great job

@jimfeaster4837 Жыл бұрын

Great tips....

@barnes29510 Ай бұрын

I'm a shade tree mechanic and I have been fighting with where the roof and the windshield meet on a 2000 Honda Accord (sunroof). The hood decided to fly up at 45mph.... I'm going to try and straighten the hood too. It's bowed straight across the middle where it made contact with the roof.... I'm going to put a 2x4 just across the motor, bring the hood down and see if I can get it as straight as possible...

@gladememmott3001 10 ай бұрын

This was excellent 🎉🎉🎉🎉

@GarageNoise 10 ай бұрын

Awesome! Appreciate the support!

@user-qp6qs9nj3d 4 ай бұрын

Nice work

@TheRealMisterChopShop Жыл бұрын

Nice work man ❤

@GarageNoise Жыл бұрын

Appreciate the comment and support!

@juhis6969 Жыл бұрын

Nice work👍

@GarageNoise Жыл бұрын

Appreciate it!

@impalaman4546 Жыл бұрын

nice work👍

@GarageNoise Жыл бұрын

Thanks ✌️

@darinsohan Жыл бұрын

great job

@GarageNoise Жыл бұрын

🙏

@kashifshaikh4050 Жыл бұрын

Nice good working

@GarageNoise Жыл бұрын

Thanks

@user-ky7ty3ie1x 11 ай бұрын

Hi can you show us how to get rid of the dents =hammer dolly etc as at the beginning of the recordings ps nice accurate stuff

@stoyannikolov1017 Ай бұрын

looks good well doine

@GarageNoise Ай бұрын

👍

@chrisok66 7 ай бұрын

Hey Chris - When you marked out the fender line, where on the fender line did you put the pencil on? were you more to the outside or inside? Thanks

@alibajilan8857 9 ай бұрын

Thank you

@GarageNoise 9 ай бұрын

You're welcome

@flipper2473 2 ай бұрын

Hello, after applying Bondo glass, to my mesh patch, I have bare metal around the area. I have a tube of Bondo glazing and spot putty or regular Bondo filler. Which product would you use on the glass Bondo and bare metal? Thanks

@ogvega71 Жыл бұрын

Whats the best filler to use now a days, it's been since 1988 I last did my 65 impala. Getting ready to do it again. Thank u for the tips.

@GarageNoise Жыл бұрын

Right now my preference is upol lightweight gold. Appreciate your comment and support!

@lorenzondabenzo Жыл бұрын

Have you tried upol stuff for plastic repair?

@AlexScott-zt4tx 11 ай бұрын

Yea

@GarageNoise 11 ай бұрын

👍

@budthatsmyrealname 11 ай бұрын

I wished i could find that video in the description. So many links and playlists and links i couldnt find it

@GarageNoise 11 ай бұрын

Which video? May I can help ya

@budthatsmyrealname 10 ай бұрын

the one you mentioned right at :15 seconds that this was a part 2 and there was a part one with glue pulling@@GarageNoise

@GarageNoise 10 ай бұрын

@@budthatsmyrealname maybe this is it kzfaq.info/get/bejne/rLShapanvJPbfZs.htmlsi=vH45BDJQA6CpwP6b

@tsrtrickster8461 Жыл бұрын

After you block sanded the glaze with 180...did you take out the 180 scratches around the repair with 320 before sanded with 600?

@GarageNoise Жыл бұрын

Yes I did, but don't get hung up on it. you can primer over 180. I recommend removing 180 because it's a good general practice to only primer over 320 because it lessens the chances of the primer shrinking in scratches and showing up in the repair. Appreciate the support!

@courtneylewis9500 Жыл бұрын

Good job, how can get electric DA sander instead of a air sander?

@GarageNoise Жыл бұрын

The sell on Amazon should be a link in the description or in my Amazon store . Electric is great saves your compressor.

@jamesmarques7245 Жыл бұрын

What is the purpose of changing from a larger plastic spreader to a smaller metal spreader?

@GarageNoise Жыл бұрын

It might be easier to control in small areas.

@garysayre4281 6 ай бұрын

Pinholes

@ovg8824 Жыл бұрын

So im confuse is the body filler the same as bondo cuz bondo hardens up fast ?

@GarageNoise Жыл бұрын

Yes, same Bondo is actually a brand name.

@tjhemrick Жыл бұрын

Why aren't you priming the bare metal before filler?

@GarageNoise Жыл бұрын

It's not necessary, some techs like to use epoxy primer before filler but it is not necessary in this situation. The only time I would use epoxy primer before filler is if I was doing a restoration and stripping down an entire vehicle to bare metal then I might to protect it from flash rust. I appreciate the question and the support!

@handyishrandyish334 Жыл бұрын

It’s right on the back of all filler cans to apply to bare metal.

@handyishrandyish334 Жыл бұрын

I read on that primer it is dtm but to proper treated metal and etch is preferred?

@GarageNoise Жыл бұрын

Yes, it is a DTM. For small repairs and to primer small areas of metal . If I was spraying a large panel or doing a full restoration that was stripped to bare metal, I would have more confidence in a good epoxy primer . Appreciate the comment and support!

@handyishrandyish334 Жыл бұрын

I was taught etch then high build. But now everyone’s doing epoxy I gave it a try on a resto I was doing it was a 1/1 ratio followed the tds on it and it never hardened 😅 after that experience Iv just stuck with what I know.ever had that happen not real sure how a guy could mess that much up but I must have

@1bad69xss4 Жыл бұрын

I see you always do filler over bare metal. Also see on the TDS it says bare metal. But seems everybody tells me to lay it over epoxy. Which is right or are both ok?

@GarageNoise Жыл бұрын

Yes this is a big debate. I've always applied filler over bare metal and never had a problem (that I know of) Recently it's become popular to apply filler over epoxy primer. I don't feel there's anything wrong with that but this involves more steps and time. The only time I might apply filler over epoxy is if I was doing a restoration taking the vehicle to bare metal and using epoxy to protect it . Then I would apply it over epoxy. Ethier way is fine for small repairs it's over kill to apply epoxy first. Hope this helps appreciate the comment and support!

@1bad69xss4 Жыл бұрын

@@GarageNoise perfect!! That’s what I’m doing a restoration. Sand the epoxy with 80 then apply filler?

@GarageNoise Жыл бұрын

@@1bad69xss4 yes, 80 for sure. Let me know how it goes. You can email me pics and I may share them with the community! garagenoise247@gmail.com

@budthatsmyrealname 11 ай бұрын

11:24 What is that primer lid with the spout called? I dont see it in the description

@GarageNoise 11 ай бұрын

amzn.to/3KPJCQ2 I think this is what your looking for . I take the handle off and mix with a drill

@budthatsmyrealname 10 ай бұрын

oh nice, it even has a built in stirer. its perfect thanks@@GarageNoise

@javieracevedo9352 Жыл бұрын

is body filler the same as bondo?

@GarageNoise Жыл бұрын

Bondo is actually a brand name like (kleenex)

@javieracevedo9352 Жыл бұрын

@@GarageNoise Hey is it true that if i buy a new bumper the check has to inspect my car for stolen parts?

@javieracevedo9352 Жыл бұрын

city

@DG-zj9ej 2 ай бұрын

How many applications of filler do you need ?

@GarageNoise 2 ай бұрын

Typically 1-3

@user-uk5xi2bh2j 9 ай бұрын

روعه

@GarageNoise 9 ай бұрын

👍

@guadalupegarza1518 4 ай бұрын

The best way to straighten metal is to use pressure not blunt force. 30+ years experience.

@georgenettlesjr1466 Жыл бұрын

Rust City on the way!

@GarageNoise Жыл бұрын

Maybe in 20 years.

@gladememmott3001 10 ай бұрын

How so??? Explain what would make that rust city LoL 😂😂😂😂😂😂😂

@JonnyBabyaka 2 ай бұрын

He thinks putting body filler over bare metal will cause rust. He’s a guy who primes and then does filler. I also use the prime then filler technique but I’ve never seen rust under filler in my life.

@thomassenemounnarath3278 Ай бұрын

Not worth the labor in time, but at the same time , rust isn't gonna happen if you do it correctly. Been doing this over 27 yrs. No issues at all. Ask me how?

@thomassenemounnarath3278 Ай бұрын

In 5-8 yrs, that car won't belong to the owner anyway. Shouldn't have got in a wreck in the first place.