Auto painting: Simple tips and tricks to help you paint perfect SILVER!

Рет қаралды 16,385

8 ай бұрын

In this episode, I'll share simple tips and TRICKS to help you paint perfect silver base coat. How to overcome the painting challanges and how to avoid them. I'll also share the tools and materials I use to get awesome results when painting your car!
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
paint gun and clear review playlist
kzfaq.info?listj=PL...
how to color sand and buff like glass
• Beginners guide to wet...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
As an Amazon Associate, I earn paid commissions from qualified purchases.
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
yt 160 lvlp paint gun 1.3 base/clear paint gun
amzn.to/3Qitr0z
finish1 fc710 spot panel clear
amzn.to/3M1ahd4
speedbcoat color blender
amzn.to/3SDkwIB
sagola DPC DISPOSABLE CUPS
amzn.to/3sudDPo
lichamp 5 pack 1.4 inch tape
amzn.to/47qB22X
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
If you find this video helpful, be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

Пікірлер: 95

@jeffmelton6875 8 ай бұрын

I really like how you are showing the repair process on the fly. You do a great job educating those of us that aren't experts!

@thecarolinacraftsman4120 8 ай бұрын

I enjoy the down to earth simple approach you have to explaining your processes and the fact you’re not full of yourself. Keep it simple and full of information and we will continue to support you best we can.

@GarageNoise 8 ай бұрын

I appreciate that!

@robertcharlton1551 7 ай бұрын

You Finally straighten me out on what a clear base. It’s a blending agent. The same term can be called other things by someone else. Thank you bunch’s.

@GarageNoise 7 ай бұрын

👍yes, some call it a clear base, wet bed, color blender, intercoat clear it can be confusing.

@joelkoonce8559 8 ай бұрын

I also appreciate a paint Technician that's not covered with tattoos.

@jhenson5168 8 ай бұрын

Okay Mr. Rogers.

@AudiRSAvant 8 ай бұрын

Why would that matter

@lightmetalinc.6488 8 ай бұрын

Bro are you taking a subtle dig at the gunman?

@CA-pv5ie 8 ай бұрын

Such good videos! Thank you GN! As so many of us spray in an open garage, to watch you deal with what we have to deal with is SO HELPFUL!

@GarageNoise 8 ай бұрын

You are so welcome!

@GregoryGreenSr.-vs4ot 5 ай бұрын

You was awesome! ❤

@GarageNoise 5 ай бұрын

You too!! Thanks!

@me9628 4 ай бұрын

Hi Chris, thx for your tips, two days ago had to paint my car with silver metallic in my garage, used wet bed with same product following your steps, 3 base coats , first one wet with blender, after 10 minutes, second coat wet , and later last a drop coat 18 psi and moved the gun away, job came without issues regarding coverage, again thanks for your videos.

@GarageNoise 4 ай бұрын

Awesome to hear! Thanks so much for the comment and support!

@JohnWD40TC02 8 ай бұрын

Hi Chris, beautiful job on this one the hood looks amazing with a perfect OEM peel finish👌as always a very detailed explanation of what you are doing at each step. I remember my first silver and as you pointed out on the hood I could see stripes in the wet basecoat which concerned me at the time but I know these days it's going to be fine once it's flashed off. Thanks for doing this Chris you are a pure inspiration to others👏🙏👍John UK

@devonmartinbasson 8 ай бұрын

Great video, i love that you show every issue and mistake and how to deal with it. i have a stupid question, so you paint your first coat of base or clear right, then while that's flashing off what happens to the left over paint sitting in the gun? is that still ok to be used for the second coat or is it thrown out and a new batch mixed for each coat?

@joelkoonce8559 8 ай бұрын

Thank You I appreciate your reminders how You can correct issues through the different stages.

@GarageNoise 8 ай бұрын

Glad it was helpful!

@v8man350 8 ай бұрын

Fantastic tutorial video, thanks for sharing your knowledge with us.👍🏻

@GarageNoise 8 ай бұрын

My pleasure!

@88Painterman 8 ай бұрын

Another great video! Looks great

@user-jv5be7pr8w 8 ай бұрын

you do better with out a paint booth then some with a booth kool thanks Dusty B

@GregoryGreenSr.-vs4ot 8 ай бұрын

Thank you I appreciate the tip.

@GarageNoise 8 ай бұрын

You bet!

@sajidmahmood3668 8 ай бұрын

Nice job another one bites the dust.I always enjoy your work 👍

@GarageNoise 8 ай бұрын

Thanks 👍

@PhillipHall01 4 ай бұрын

This video was particularly helpful. I was wondering if the LVLP guns were good for silver metallics. Thumbs up! I had one delivered just today and look forward to using it, Phillip Hall

@Danno74Z 8 ай бұрын

Hi Chris, I really enjoyed the video and learned a lot. Seems like you were fighting dust particles more than usual but those are the challenges in an open garage which most DIY's will be facing. By you showing the process of stopping fixing and moving on it helps a lot. This time of year it's tough as there is so much stuff in the air from leaf particles, dust from fields and dead grass. Take a black glass stove top and clean it. Watch the dust land back on it :). The big issue for me is the fiberglass insulation up on the roof rafters. I will do what you have done. It looks like you have plastic up above where you paint. Cheap way to attract and hold fiberglass particles. GOOD ONE!

@GarageNoise 8 ай бұрын

They were actually small bugs, had to shut the door on second coat of clear.😵‍💫

@bagathompson3985 4 ай бұрын

I must say a big respect to you . I started earning more because of you my friend. I really appreciate your videos keep up the good work. Blessings from jamaica 🇯🇲

@GarageNoise 4 ай бұрын

I appreciate that!

@CorradoRacer 4 ай бұрын

Thx for te tips great live video

@travisjackson6923 6 ай бұрын

My tip would be if you do 3 coats of base start the first from front to back, second across the hood and third coat front to back again. Ending the same direction you spray the top of the fender. Another thing you can do is drop coat on the last coat just a touch to prevent mottling but still a smooth finish. If blending, use a step warmer on reducer.

@GarageNoise 6 ай бұрын

Good tips!

@impalaman4546 8 ай бұрын

Great video thanks for sharing cris

@GarageNoise 8 ай бұрын

Thanks for watching!

@troyadams1076 8 ай бұрын

Another great video

@GarageNoise 8 ай бұрын

I appreciate that!

@eapauto 8 ай бұрын

Great job, sir, you make it look easy!

@GarageNoise 8 ай бұрын

Thanks 👍

@davidharrison8397 8 ай бұрын

Looks great....nice job. 👍👍

@GarageNoise 8 ай бұрын

Thanks 👍

@kseries20-24only 8 ай бұрын

Reducer for the RTS binder, that's probably why I got a run 😅 I would really appreciate a video about how you clean your guns

@mikedaniels1697 Ай бұрын

Another great video thanks for the info have a question would you use the same process on a new bumper cover same color

@guntherritthaler568 8 ай бұрын

Top Videos 👍👍👍. Thanks from germany ( Bavaria)🍻.

@GarageNoise 8 ай бұрын

Thanks 👍appreciate the support!

@bobbydoll7204 8 ай бұрын

very nice

@GarageNoise 8 ай бұрын

Thank you👍

@geydyarriaga4022 3 ай бұрын

Great videos, I like that you are a straight forward person, what tip size or Nozzle Needle size does my R500 needs for phantom gray base coat? it's a dark grey metallic from toyota. please let me know.

@GarageNoise 3 ай бұрын

1.3 if what I use for all stock colors

@frankmaceyka4895 8 ай бұрын

Another good info packed video. Could you do a video on how and what you use to denib and buff? Maybe a short.

@GarageNoise 8 ай бұрын

👍

@dkcarsinc 8 ай бұрын

Thanks for showing all the things that can crop up as you paint and the corrections you can do to repair them. What capacity is your small compressor?

@GarageNoise 8 ай бұрын

I use a large compressor. Iv seen this gun used with a 20 gallon compressor tho.

@rogerchristeson 8 ай бұрын

New to this channel as well as this trade for that matter. You have a way of explaining things a noob like me can understand. I will be watching plenty of your content. Also, have you ever considered one of them inflatable booths on amazon or ebay? Im wanting one soon and im curious whats your opinion on that with a low pressure turbine system

@lesliwells5433 5 ай бұрын

HELLO,THANKS FOR THE VIDEO,? DOES THE FLUID DELIVERY ON THE YT 160 IS MORE THAN THE EASTWOOD, AND THE A610?

@JoseSIMENTAL-pm2jq 8 ай бұрын

Buenos. Vídeos.

@GarageNoise 8 ай бұрын

Thanks brother!

@ngaihtea5237 8 ай бұрын

Great job 👍🏻 Sir, Now I have used Aeropro A610 Lvlp spray gun for Auto paint, compare to Rongpeng R500 Lvlp gun which do you think is better for small air compressor?. Can you give me advice?

@jameswilliams8252 8 ай бұрын

What were the gun settings on the base and clear

@FitzroyWright 3 күн бұрын

Me in Jamaica

@johnjenson5738 6 ай бұрын

Time frame between coler and paintalso i noticed you changed direction for awhile on the hood.?Thanks

@BearBudgetTurbine 8 ай бұрын

I'm using that color blender to mix color flip pearls on a couple jobs. I treat it more like cheap basecoat and do a 2 to 1 mix. But I am using the turbine and a 1.0 to spray it.Way too thick. I will end up with bad texture otherwise. I don't mind, because diluting the blender stretches the product so it lasts longer...

@GarageNoise 8 ай бұрын

That's a great use for it! Appreciate the comment brother!

@danielking5749 8 ай бұрын

Hi what sort of paint are you guys using? I was thinking of using rustoleum through the r500 but to me it’s quite a soft paint or could I use it with a UPOL clear coat on top?

@GarageNoise 8 ай бұрын

I use nason xl base coat

@ivansmaic5485 5 ай бұрын

Garažni ratnik😂❤

@GarageNoise 5 ай бұрын

👍

@Danno74Z 8 ай бұрын

Chris, Can one clear an entire car with the FC120? Difference between spot panel clear vs full car clear?

@GarageNoise 8 ай бұрын

Finish 1 makes a over all clearcoat the fc720 the difference in a overall and a spot panel fc710 is that it cure a bit slower in order for you to paint a full vehicle and still have good flow while painting. Appreciate your comment and support!

@wayneodonnell8847 8 ай бұрын

Chris what size air line to the gun do you run ?

@GarageNoise 8 ай бұрын

3/8, appreciate the comment and support!

@lewismartin9980 8 ай бұрын

To bad you don't have a 2-3 day class twice a year..no pressure lol 😂😂

@GarageNoise 8 ай бұрын

🤔maybe someday

@johannvanderschyff7735 8 ай бұрын

If using a lvlp gun, why do you use high psi? You use 25psi and 30 to 35 psi. Is that normal for single stage or is that for base coat and clear coat only. Thank you

@johnjenson5738 6 ай бұрын

What percentage alcohol do yo use for wipe down.

@GarageNoise 6 ай бұрын

70% isopropyl

@movaughn20 4 ай бұрын

I always feel the grit of sealer, and think, that's going to soak up the paint, not matching sanded area? Just an opinion. I mostly watching the texture, weather it's base, clear, latex in a home spraying. All about consistence for a flat uniform finish. I leave some gun cleaner in the gun, between sprays and for storage. Is this a bad idea?

@nashcodm2831 8 ай бұрын

Rate the lvl guns that you use from best to worst ❤??

@GarageNoise 8 ай бұрын

I have l5 lvlp guns from different sellers but they're all the same gun just rebranded. The a610 and the yt-160 do have a updated appearance but the same gun internals. I like the yt-160 the best just because the color cleans up better that the black a610.

@shortyred60 8 ай бұрын

Is 70% isopropyl alcohol safe to use undiluted on cars? Some say no on the clear coat.

@GarageNoise 8 ай бұрын

Yeah it's ok on clear coat. I wouldn't use it on fresh clear but after it's cured no problem.

@johannvanderschyff7735 8 ай бұрын

Why do you not spay in a criss cross pattern? I am new to spraying so sorry for the stupid question

@kevinc5917 Ай бұрын

WHy does it look like you spray very fast on the fender of the jeep for clear, but on the hood it seems like you go alot slower? Thanks!

@GarageNoise Ай бұрын

I guess I do that because a hood can hold more material so I can slow down and hit it a bit harder. If you do that on a side panel it's more likely to run.

@kevinc5917 Ай бұрын

@@GarageNoise ok thanks. I am spraying my truck first ever painting and ill have the hood flat and the doors off should i paint the doors standing up or flat, its a green metallic paint, thanks for replying back!!

@GarageNoise Ай бұрын

@@kevinc5917 hey no problem, I'd paint them standing up. You might be able to get a flatter finish if you paint them flat but will definitely get more trash in the job. Send me pics of the resultd a garagenoise247@gmail.com

@D4x4Bronc 8 ай бұрын

I can see the stripes in that cheap upol crap paint, and so many coats it took to hide them to the eye

@GarageNoise 8 ай бұрын

It's not upol

@jhenson5168 8 ай бұрын

Not so be that smart ass commenter, but sealer would have saved you all the hassle you endured painting this silver.

@GarageNoise 8 ай бұрын

I didn't really have any hassle. Unless you mean the solvent fisheyes. That is just something that can happen and it happens with sealer too. I'm not apposed to using sealer just sometimes it's not necessary. Appreciate the comment and support!

@jhenson5168 8 ай бұрын

After primer, we wet sand to 800, then grey scuff pad with presto scuff stuff. Then sealer, especially with silver we soft pad 1000 on the sealer, alcohol then wipe, tack rag, then spray 2 coats of base then drop coat. Sealer isn’t always necessary, but using the correct sealer will make silver base match near perfectly.

@GarageNoise 8 ай бұрын

@@jhenson5168 👍

@clifffollett4360 Ай бұрын

Did you not mix any hardener in the base?

18:21

Tips and tricks for brlliant clear coat and silky smooth base coat

Garage Noise

Рет қаралды 18 М.

19:36

Auto painting: blending clear coat / smart blend and bumper scratch repair.

Garage Noise

Рет қаралды 35 М.