Auto Sanitizer Dispenser and Tap Water Control

No video

Auto Sanitizer Dispenser and Tap Water Control

Рет қаралды 71,818

4 жыл бұрын

A very simple , effective cheap cost circuit is here for automatic Sanitizer dispenser or for auto tap water control.Circuit is built on opto coupler PC817 and NPN transistor BD139.
No Microcontroller used.
alselectro.wor...
Advanced model using microcontroller is here :
• AUTO SANITIZER ADVANCE...

Пікірлер: 94

@Meccanokinematics 8 ай бұрын

Great vid! Finally somebody who took the effort to explain each and every component and show a decent circuit.

@rajkumarsr4267 4 жыл бұрын

Dc submersible pump is getting melted if we dip inside And use it for few days. All plastics have melted. Any experience? All these big and small pumps are tested and usable only fir water medium. Could u pl through some light on this?

@raghuannavarapu9982 4 жыл бұрын

Sir I am sorry to comment like this I just want to save others money and time.it was not working as I personally tried and tired off.but your are the great teacher I got a lot of knowledge from your videos 🙏.

@_Ashutosh_Rana_ 4 жыл бұрын

Your failure to work any circuit doesn't prove the circuit wrong. It is simply the other way around. It is just a simple and straight forward circuit.

@Projects_Circuits_Boards 4 жыл бұрын

try this sir kzfaq.info/get/bejne/erqmaLFl1JrDZoE.html

@naveensurendharanbalavenka8550 4 жыл бұрын

Really very nice and valuable method sir, it's very simple and easy method

@razsudhanshu4041 4 жыл бұрын

wrapping black tape helps it to work even in sunlight, it really helpful 4 me

@mdirfanansari944 4 жыл бұрын

Bro did it really work in sunlight

@mdirfanansari944 4 жыл бұрын

I have big issue with.i.made senitizer machine but the problem is it's not work.in.outdoor when.sunlight detect its on continue

@razsudhanshu4041 4 жыл бұрын

Wrap black tape on both or sensor and set it towards downward

@mdirfanansari944 4 жыл бұрын

@@razsudhanshu4041 its work.im.sunlight after wrapping tape

@electronic7979 4 жыл бұрын

Nice project. I liked it

@prc8433 4 жыл бұрын

For water flow control and handling it is perfect butHow can you suggest to use water pump & Solenoid valve for alcohol based sanitizer ?

@cyril2361 4 жыл бұрын

I had made a automatic sanitizer dispenser but there is a problem when ever the sanitizer gets finished in tank air bubble gets in motor and will not dispense till the air is removed. What needs to be done to avoid this problem.

@PankajKumar-ps2cn 4 жыл бұрын

Sir can we use 12v pump with this circuit for water flow

@mdirfanansari944 4 жыл бұрын

Kya black tape se cover karne.se false triger nahi ho raha hain..sunlight.main kaam.kre ga

@scottishtamil 4 жыл бұрын

How to control the flow quantity.. how to use a timer? or any other way using a relay or something? because, people usually need to 3 to 5ml to rub hands... how to fix the quantity of the flow?? please help

@venkateshprabhu9996 4 жыл бұрын

Why we need to use opto coupler to trigger the output. Instead can I use 5v coil relay connected to IR object detector output. So I may able to control ON/OFF solenoid or water pump?

@alankritsharma2764 4 жыл бұрын

Can you elaborate what you are try to say?

@kstalonegaming4431 4 жыл бұрын

I want this

@bs_entertainment2024 4 жыл бұрын

Sir I have a query How much voltage should we connect with solonoied valve and where from the supply will come.

@shriyash16 4 жыл бұрын

24 volts . Supply source will be External adapter .

@udaygaikwad5282 4 жыл бұрын

Neat and simple circuit idea

@mohanrajselvaraj4831 4 жыл бұрын

Tis will burn d pocket..use ir emitter and photodiode with lm358 op amp circuit

@vishnuprashobs7772 4 жыл бұрын

Thank you sir....... It is really nice.

@raghavank4594 4 жыл бұрын

What is the rating of MOV used in this circuit? Or did u use any fuse?

@rajeshshinde3902 4 жыл бұрын

Dear Saravanan I used Relay in place of solenoid valve to run dc motor .....Sometimes motor behaves funny it stats automatically ....Please Reply

@nalinchawda 3 жыл бұрын

IR module i found to be very sensitive to sunlight ...It with switch ON motor any time there is bright sunlight

@insolationpowertech2129 4 жыл бұрын

Can I use solenoid valve + 6v dc motor in this circuit ?

@magicshutters 3 жыл бұрын

This works good but need a timer to control the flow time.. anyone ?? a 555 timer can it be attached? how??

@narendrasuryawanshi1708 4 жыл бұрын

Sir please make video on rechargeable battery operated circuit & its components

@renjithcatek7435 4 жыл бұрын

very useful circuit.Thank you sir ....

@aishakhan4072 4 жыл бұрын

kzfaq.info/get/bejne/frZ2fdNjqteRgps.html

@iot_enthusiast 4 жыл бұрын

Good video and much needed project in the current situation. Can you please provide link to solenoid ? Thanks

@raghuannavarapu9982 4 жыл бұрын

Just buy it from Washing machine spare parts shop you got original product as online products will not work for months.

@Bijus 4 жыл бұрын

That you can purchase for ro water machine dealer

@ravindranpullooreramam7244 4 жыл бұрын

I didn't see your circuit diagram pefectly Please include it

@rahultomar775 4 жыл бұрын

Nice product 👍

@dje5300 4 жыл бұрын

Superb sir

@user-km9xq5wt4k 4 жыл бұрын

Sir which motor used plz tell mi motor name

@Praveenkumar-eh4fo 4 жыл бұрын

Your voice is just like Raana's voice (telugu actor)

@classicelectronic524 4 жыл бұрын

Which water pump use ?

@magicshutters 4 жыл бұрын

If ANYONE could get this circuit working, kindly let us know. I tried hard but its not working. The current at the solenoid end is very low.. If anyone can help please do so.. Thanks in advance.

@Projects_Circuits_Boards 4 жыл бұрын

try this sir kzfaq.info/get/bejne/erqmaLFl1JrDZoE.html

@Projects_Circuits_Boards 4 жыл бұрын

try this sir kzfaq.info/get/bejne/erqmaLFl1JrDZoE.html

@mssantosh8055 4 жыл бұрын

But I have very big doubt that these Automatic Hand Sanitizing Dispenser are not durable in long run.🤔🤔🤔🤔. In a split of second, this mechanism should be on & off for hundreds & thousand times(may be) based on the floating. In a split of second this entire minute circuit gets on & off for no.of exposures we all make to sensor.. In such case, this tiny minute mechanism, will it survive in it's long run.. Hope u got me..? Plz do not take this on a Negative note.. Try to solve my query. Thank You.

@Projects_Circuits_Boards 4 жыл бұрын

try this sir kzfaq.info/get/bejne/erqmaLFl1JrDZoE.html

@Bijus 4 жыл бұрын

Where i can get the ir board?

@sudalemuthu8114 4 жыл бұрын

WhatsApp me pangu 8884570727

@casholsen5848 4 жыл бұрын

There is no need or purpose for the opto-coupler. Both sides are supplied by same power supply, there is nothing to isolate.

@SaravananAL 4 жыл бұрын

Opto is used here as Coupler and no need of isolator.Common GND circuit in coupling mode, to switch between 2 voltage.

@PankajKumar-ps2cn 4 жыл бұрын

Saravanan AL sir i want understand this circuit properly kindly understood me this is my whtapp no 9218787008

@Satya-nash 4 жыл бұрын

@@SaravananAL how can I contact you?

@Projects_Circuits_Boards 4 жыл бұрын

@@Satya-nash try this sir kzfaq.info/get/bejne/erqmaLFl1JrDZoE.html

@sandeepmittal7674 4 жыл бұрын

Plz make auto santization tunnel fast

@roshanpatil3897 4 жыл бұрын

IR SENSOR USING ALTRASONIC SENSER USE

@yogoyo007 4 жыл бұрын

do you have this pcb ready with you

@saurabhbanerjee1290 4 жыл бұрын

Tell us where to buy this circuit complete

@aishakhan4072 4 жыл бұрын

In the link below kzfaq.info/get/bejne/frZ2fdNjqteRgps.html

@sudalemuthu8114 4 жыл бұрын

8884570727...

@Projects_Circuits_Boards 4 жыл бұрын

try this sir kzfaq.info/get/bejne/erqmaLFl1JrDZoE.html

@rajanb7729 4 жыл бұрын

Sir electric kit available sir

@sudalemuthu8114 4 жыл бұрын

8884570727...

@Projects_Circuits_Boards 4 жыл бұрын

try this sir kzfaq.info/get/bejne/erqmaLFl1JrDZoE.html

@ysu5930 4 жыл бұрын

Can u supply these pre-made circuits to us please

@_Ashutosh_Rana_ 4 жыл бұрын

Full professional kit available from united77.com for contactless dispenser.

@omkarmeduru 4 жыл бұрын

@@_Ashutosh_Rana_ i searched in it but I didn't found , Can any direct link of it.

@sudalemuthu8114 4 жыл бұрын

@@omkarmeduru 8884570727...

@Projects_Circuits_Boards 4 жыл бұрын

@@_Ashutosh_Rana_ try this sir kzfaq.info/get/bejne/erqmaLFl1JrDZoE.html

@Projects_Circuits_Boards 4 жыл бұрын

@@omkarmeduru try this sir kzfaq.info/get/bejne/erqmaLFl1JrDZoE.html

@surajpahwa6958 4 жыл бұрын

Motor chahiye apke pass hai

@rabindrasadhukhan622 4 жыл бұрын

I neded ir module cirkit pls adrese

@profravi 4 жыл бұрын

This ir model range in cm pls. Ir price pls sir

@raghuannavarapu9982 4 жыл бұрын

Upto 20 cms.you can buy original sensor at dfrobot upto 80 cms .but to make sanitizer dispenser 20 cms is more than enough.

@SaravananAL 4 жыл бұрын

IR range is 1 to 2 cm only .If more range required go for IR PROXIMITY sensor which works up to 1 mtr

@zainalhas7416 4 жыл бұрын

@abhineshkashyap1686 4 жыл бұрын

pressure kaise aaega chhotu

@_Ashutosh_Rana_ 4 жыл бұрын

Jaise yahan solenoid laga hai, tanki upar rahegi aur pressure gravity se aayega. Tanki ke neeche se pipe solenoid ke input me jaayega.

@abhineshkashyap1686 4 жыл бұрын

@@_Ashutosh_Rana_ motor lgaeye tanki ki jrurtN pdegi

@_Ashutosh_Rana_ 4 жыл бұрын

@@abhineshkashyap1686 Ha...motor lagaayenge to usko tanki se upar rakhna padega. Ta ki graviti se liquid flow na ho paye. Sirf motor chane pay liquid bahar aaye.

@raghuannavarapu9982 4 жыл бұрын

Sir,why you wrapped insulation tape on sensor module.just take out that . it will absorb IR RAYS from sunlight and the whole project gets wasted😄😄😄😄.please viewers don't try to make this project under sunlight it's only for indoor use .even sun light from window also make your project flop.you will lose sanitizer unnecessarily.use ultrasonic sensor with pic10f200 microcontroller.

@SaravananAL 4 жыл бұрын

IR used as object detector and in Sun light or even daylight , without sleeve this will not work.

@rajkumarsr4267 4 жыл бұрын

With black sleeve there IR modules r dependable for commercial use?

@SaravananAL 4 жыл бұрын

@@rajkumarsr4267 For commercial product , IR Proximity is best as it has modulation/demodulation circuit.As this sensor is in demand I'm developing a modulated IR module with PLL circuit.Will post the video soon.