AutoCAD 3D Basics - Tutorial to model a floor plan (fast and effective!) PART 1

Рет қаралды 171,926

7 жыл бұрын

Open playlist: Autocad in 3D - tutorials and exercises
• Autocad in 3D - tutori...
To get this floor plan and front elevation, click on the link below:
drive.google.com/file/d/1YFS1...
In this video I explain a fast technique to draw the modeling of a simple floor plan.
Introduction of the command PRESSPULL.
This is dedicated to people who want to start drawing in 3D.
The tutorial is organized in different sections:
-Drawing again the lines of the walls (in new layers)
-Extruding the walls
-Draw windows and doors in the exterior walls
Soon will be released the 2nd part, which I continue modeling this simple house.
If you have any questions or comments please feel free to post :).
Alternatively, you can send me an e-mail to: cadinblack@gmail.com
Licence:
The video shows the version 2013 of AutoCAD® and it is used exclusively for educational purposes.
Autodesk screen shots reprinted courtesy of Autodesk, Inc.
The narration and all the illustrations were created by CAD in Black.

Пікірлер: 51

@nicktsipiras1748 4 жыл бұрын

Thank you very much for the time and effort you put in all your videos , They helped me in drafting 3d, simple , models with ease!!

@CADinblack 4 жыл бұрын

Thank you very much for your appreciation +Nick Tsipiras

@ahmadramadan4607 7 жыл бұрын

Thank you so much !! cant wait to learn the 2nd part from your next video !!

@CADinblack 7 жыл бұрын

I am working in it. I will upload it next few days

@offtap1395 2 жыл бұрын

You rock. Thank you very much for all your content.

@sviatlanaandreichuk8234 4 жыл бұрын

Thank you! I find it very useful.

@jhonnysin115 7 жыл бұрын

At least you uploaded Thanks

@jessjuylbaliquig6617 5 жыл бұрын

this really helped me thanks so much

@ananyaagarwal4318 7 жыл бұрын

Amazing.... as usual

@drizzi1000 7 жыл бұрын

good job keep the videos coming

@davidlizarraga4191 7 жыл бұрын

Loved the video! When can we expect part 2?

@erzcav4793 3 жыл бұрын

Thank you soooo much :)))

@lavanmohammed1295 5 жыл бұрын

thanks for your video

@mememe12ification 4 жыл бұрын

thanks a lot!

@mohammedabdullah7826 6 жыл бұрын

Hi, thank you for your videos , i asked how do you draw windows and ortho not activeted

@ananyaagarwal4318 7 жыл бұрын

Waiting for ur nxt video

@suntrofoss 5 жыл бұрын

I have done with two layers the int walls and ext walls...When i do presspull, int walls created like surface extrusion and ext walls like solid...Why???

@GC88tv 6 жыл бұрын

you can use PE in command to polyline

@hiphopshaun 7 жыл бұрын

Thank you for your videos they are very helpful! When will you release Part 2 of this video? Thanks!

@stemstudentph9246 3 жыл бұрын

Awesome

@CADinblack 3 жыл бұрын

Thanks a lot!

@stemstudentph9246 3 жыл бұрын

@@CADinblack hi where can you download old versions of auto cad? Cause probably those are free by now. Just want some hands on practice.

@kmho2000 7 жыл бұрын

at 8:00, How can you change Z- axis to draw rectangle?

@aidelite3423 5 жыл бұрын

you click tab he mentioned it

@wilzontuazon5940 7 жыл бұрын

thank you for this video! keep it up! i just want to ask on how you extrude your walls with plain wall, mine has grid like, can you help with my problem? Thanks!

@CADinblack 7 жыл бұрын

When you see a grid like, you are just extruding the outlines instead of all the surface. Try to click inside the polyline, and wait until it is highlighted.

@wilzontuazon5940 7 жыл бұрын

thank you!

@miaria 2 жыл бұрын

thank you!

@AFCKAR 7 жыл бұрын

Thank you.

@rjaberilla574 4 жыл бұрын

I've selected 3d modelling, i've clicked the cursor and move the wheel. But still can not move the workspace to the view i want.

@svetomirstamenkovic3684 4 жыл бұрын

shift + cursor

@gardevoir3097 4 жыл бұрын

Click the cube at the top right

@mabengalutangu5979 8 ай бұрын

Hi, very useful anf helpful video. What units did you use though? is it Feet and inches? or Metres/centimetres/millimietres?

@ajduo6431 6 жыл бұрын

Help! I can't make a rectangle for the windows, the highlighted lines doesn't show up :/

@farnoushfarjadmanesh7109 5 жыл бұрын

I have the sane problem would you please help me ☹

@dinosarac1 5 жыл бұрын

Try clicking on axis thats usually in the corner with z.y,x showing click right in the middle of it and drag it to the wall where you want to put the window in then put in a rectangle command

@hamezdeliu 4 жыл бұрын

With which performace your computer works on this AutoCad version in 3D?

@CADinblack 4 жыл бұрын

Hi. +Hamëz Deliu. To be honest, I am not able to answer your question precisely, but I can say it is a bit heavy working in 3D, specially if you are working in a large project

@zanezwinkosenhlemkhize3449 6 жыл бұрын

Hello, You are simple the best teacher, through your videos I am able to design my bitcoin mining farm. I had no prior knowledge on autocad of drawing software in that matter. I thank you so much. What can I do to practice more of your tutorials?

@CADinblack 6 жыл бұрын

Hello +Zanezwi Nkosenhle Mkhize Thank you very much.There are more plans in this link. Have you got them?pt.scribd.com/user/332635139/CAD-in-black

@zanezwinkosenhlemkhize3449 6 жыл бұрын

Yes thanks, I've watched them all. I have practiced them all

@marknava2953 7 жыл бұрын

WHERE'S THE PART 3

@krishnamoorthisridhar5187 3 жыл бұрын

Dear sir Autocad 3d basics part5 &6 vids are not uploaded pl ser to it Yours Sridhar

@mr.butterfly695 2 жыл бұрын

do you have idol a foundation plan please help I don't know

@CADinblack 2 жыл бұрын

Hello. Unfortunatelly there is no fundation plan available yet!

@paulomenguito2610 2 жыл бұрын

why I can't join the lines when I click presspull?

@CADinblack 2 жыл бұрын

Hi Paulo. What do you mean about joining the lines. Presspull works on closed surfaces. We just create a solid. All the former objects remain in the same place!