AUTOCAD 3D HOUSE SLOPED ROOF | AUTOCAD SLOPED ROOF

AUTOCAD 3D HOUSE SLOPED ROOF | AUTOCAD SLOPED ROOF | 3D ROOF

Рет қаралды 573,726

11 жыл бұрын

This video shows how easily you can create a complicated 3D sloping roof in AutoCAD.
#autocad #autocadtutorial #tutorial #cadcam #3dwall #3dwalkthrough #3dmodeling #3ddrawing #3dhousedesign #sabeercad #3droof #slopedroof
Hit the like button of this video if you liked it .... :)

Пікірлер: 253

@Manuel2009Quevedo 7 жыл бұрын

More than great! Along years I had been trying to find an easy way to build it. Thanks a lot sabeercad.

@sabeercad 11 жыл бұрын

Thanks for your feed back ... Watch out for more such tutorials in future .....

@sabeercad 11 жыл бұрын

You are welcome . Do subscribe to my channel to get mails on my future video uploads.

@kevinhay8353 9 жыл бұрын

Nice, clean tutorial, outstanding job!

@muning1227 8 жыл бұрын

Your channel is great! I'll be working as a cad designer and your videos are very helpful. Will be watching more. Thanks for this.

@sabeercad 8 жыл бұрын

+Julius Adriano You are most welcome . You may visit and Enroll at sabeercad.teachable.com to get Life time access to all the tutorial videos on 3D visualization using AutoCAD , 3DSMAX and Adobe Photoshop

@mahadimohd3047 7 жыл бұрын

you are good teacher, easy to understand thank you very much for this video

@mmkelss 9 жыл бұрын

Thank you ! This has been a life saving tutorial

@sabeercad 9 жыл бұрын

Thanks and best wishes...

@shaijishalappurayil9495 10 жыл бұрын

Thanks Mr:Sabeer.Thanks a lot.

@autocad2d3d27 7 жыл бұрын

Thank you Please don't stop your tutorials.

@dokiesallntv6707 11 жыл бұрын

thank you for your tutorial its really a big help for a biginners like me

@Chronicle_chapters000 10 жыл бұрын

Thank you so much sir .l Don't have any idea about Sloped roof thanks for helping me.

@josephrohrman852 8 жыл бұрын

your videos are good. I'm now a subscriber! Thanks!

@calvinabueva2234 7 жыл бұрын

hey ser your great, thank u for everything

@francishawkson6971 9 жыл бұрын

man you are good. keep it up. God bless you for sharing

@sabeercad 9 жыл бұрын

You are most welcome :)

@hashbrownkickman9948 8 жыл бұрын

thanks for the explanation really appreciated it :)

@sabeercad 8 жыл бұрын

You are welcome

@gilbertocortes7213 9 жыл бұрын

You look like you're an expert. I appreciate your videos they're very helpful for me.

@sabeercad 9 жыл бұрын

Thanks for that comment. Make the best use of all the videos

@ijazparwana3791 8 жыл бұрын

thank you so much sir.i almost solve my all problems with the help of your tutorial thanks again sir

@sabeercad 8 жыл бұрын

You are most welcome

@johnmartins5773 4 жыл бұрын

Excellent teaching method. Thanks, I do enjoy learning.

@sabeercad 4 жыл бұрын

Thank you 👍😊

@FiishS2icks 7 жыл бұрын

big help, thumps up for you sir.

@mohdyousuf1310 6 жыл бұрын

Superb sir...... Good..your explanation..............lot of thanks sir

@sabeercad 6 жыл бұрын

+Mohd Yousuf You are welcome ...

@AC3DCad 4 жыл бұрын

the best instructor, I learn a lot from you

@sabeercad 4 жыл бұрын

Happy to hear. Thank you 😊👍

@sanzbalonz9893 8 жыл бұрын

tnx this really helps specially in my 3d project house, im having a hard time making this slope roof, hope i can do this :D oh ya i just press subscribe ^_^

@sabeercad 8 жыл бұрын

You are most welcome . You can visit and Enroll at sabeercad.teachable.com to do a course in 3D Visualization

@adobongmanok3711 5 жыл бұрын

it really a big help thank you man

@residentialremodellingbyfa374 7 жыл бұрын

Sir your are amazing tutor, I learn a lot from you. Your explanations are very easy to understand.

@sabeercad 7 жыл бұрын

+Residential Remodelling by Farooq Interiors Thanks for your interest and comment

@antonwijaya4991 6 жыл бұрын

try checking this one. this is quite interesting kzfaq.info/get/bejne/oJiddpuns6jHhKs.html

@idarsidharta1391 6 жыл бұрын

Try to compare this technique. more interesting and easy click this link kzfaq.info/get/bejne/oJiddpuns6jHhKs.html

@ingyack4300 8 жыл бұрын

wooow you are the best sir . you my much help solve my problem I had on autocad 3d

@sabeercad 8 жыл бұрын

+yacoub awaleh Thanks for your comment . I don't know french

@rocky8004 Ай бұрын

Awesome teaching Sir

@sabeercad 10 жыл бұрын

I am planing to upload . Please wait for it

@huzaifasafdar1516 8 жыл бұрын

Very helpful. Thank you.

@sabeercad 8 жыл бұрын

+Huzaifa Safdar You are most welcome :)

@sabeercad 10 жыл бұрын

You must have selected a the wrong object or the object you have selected may not be closed and continuous . Just make the pline profile once more picking the point the correct order , when you have reached the last but one vertex , just give "close" to exit the pline . Then you extrude with the taper angle

@KuyaMarkRCE 5 жыл бұрын

Thank you so much sir!

@sabeercad 5 жыл бұрын

You are welcome 😊

@WhoIsGodReally 2 жыл бұрын

Thank you. well done

@sabeercad 11 жыл бұрын

Just follow my tutorials step by step . You will definitely get the result . To move the solid roof you have to give solidedit command and go to face option and then take move option and the select the face to be moved .

@Assie_Pakboi 4 жыл бұрын

sir, it says modeling operation error : gap cannot be filled please help

@BackHurtsBad 10 жыл бұрын

Thank you so much !!!!

@theblackdahlia88 8 жыл бұрын

Your roof method is so simple. Thank you.

@sabeercad 8 жыл бұрын

+The_Howler You are most welcome :) . You may visit sabeercad.teachable.com for rest of the videos .

@sabeercad 8 жыл бұрын

+The_Howler You are most welcome :) . You may visit sabeercad.teachable.com for rest of the videos .

@theblackdahlia88 8 жыл бұрын

sabeercad Thank you sir. These are great lessons to refine the autocad skill.

@ViaSat12 Жыл бұрын

it is extremely difficult

@nou257 7 жыл бұрын

thank you for this!

@sabeercad 7 жыл бұрын

+Elisa Shay You are welcome :)

@sabeercad 10 жыл бұрын

Just follow the procedure in the video step by step pausing the video , you will definitely get the result . All the best

@bradhorsfall8351 6 жыл бұрын

The Move Faces command give a 'change in topology' error. Do you know why?

@touristguide3424 9 жыл бұрын

Very informative.

@sotirisr8734 2 жыл бұрын

TY BRO U HELPED ME A LOT

@sakibtalukder-6890 2 жыл бұрын

Jajakallah

@arielnitro84 4 жыл бұрын

extrusion using a path seems valid only on 90deg angles of the polyline on the xy plane. however, i tried using it on polyline with acute angle and the extrusion ignores the path of the acute angled polyline. is this true or is there something wrong on my drawing?

@somphonekhamlibounthavy2483 6 жыл бұрын

I am a beginner, thanks for this video guideline

@sabeercad 6 жыл бұрын

+somphone khamlibounthavy You are most welcome ☺

@cableskennetheleda6795 3 жыл бұрын

the best

@sabeercad 3 жыл бұрын

Thanks 🥰

@kristosuur3031 7 жыл бұрын

Hi Sabeer. Thanx for all of youre tutorials but how to make a cable roof? Thanx

@wojciechkaras1084 7 жыл бұрын

Is that possible to work in 3d plan and then switch on to 2d mode? I need also 2d plans and 3d as well.

@irfanpoe8855 7 жыл бұрын

wow, thank you very much.

@sabeercad 7 жыл бұрын

+Vird Sam You are welcome

@ahelkadry 8 жыл бұрын

great. go ahead, good explanation...

@sabeercad 8 жыл бұрын

Thanks for your comment

@humairajan2232 5 жыл бұрын

thank you too so much for this tutorel

@sabeercad 5 жыл бұрын

You are welcome 😊

@j.t.6456 2 жыл бұрын

Awesome tutorial!!

@sabeercad 2 жыл бұрын

Thank you !

@chandan_beniwal 7 жыл бұрын

Sir when i am extruding, this surface is end up with grid lines , how to convert this surface into solid.?

@civilengineermuhammadshahz6482 4 жыл бұрын

Nice

@sabeercad 4 жыл бұрын

Thanks 😊

@dmistprafulla 10 жыл бұрын

i am pretty interested in watching a full 3d house tutorial

@patricktryep224 10 жыл бұрын

I appreciate your thanks

@xzotzvvs6492 10 жыл бұрын

Thanks for the tutorial.Pls can you advise how do you get back to previous view.

@master01AD 8 жыл бұрын

thank for this vedio bro.

@sabeercad 8 жыл бұрын

+Dexter Amosin You are welcome

@angeleondrg 6 жыл бұрын

That was great!

@sabeercad 6 жыл бұрын

+garrett barron Thanks for that comment . Why don't you learn 3DS MAX software to learn proffessional quality rendering ... ☺

@angeleondrg 6 жыл бұрын

its on a long list of things to do

@olivermanase5863 4 жыл бұрын

Am having a problem when I try to start putting the roof my line are remaining in 3D I need your help please

@darylmalagum8307 8 жыл бұрын

this helps a lot

@pmagicallove 10 жыл бұрын

Thank you sir

@HHamid-fn9nj 9 жыл бұрын

thank you so man

@bandhanianil 5 жыл бұрын

Very good

@odalije_46 2 жыл бұрын

please which auto cad do you use 2022 or?

@mahdihasan3327 8 жыл бұрын

I am the student your vedio tutorila very very thanks sir

@sabeercad 8 жыл бұрын

+Mahdi Hasan W/Salam . You are most welcome

@mahdihasan3327 8 жыл бұрын

Thanks Sir

@08lexter 3 жыл бұрын

You can also create the mould using the SWEEP command

@antoniojosemorenolujano4754 10 жыл бұрын

es un programa muy bueno tengo 53 años y en estos momentos estoy haciendo un curso

@ASIFSHAH-pc1mw 10 жыл бұрын

sir your work and your language style is good.....i like your work...g0d bless u... and sir same problem here tapering angle sloped roof. when i make face command then select move aftr slop make equal. nt show in 30 degree nd 60 degree... plz tell me something about this problm.thnanku

@godfredagbedor3705 3 жыл бұрын

great work

@sabeercad 3 жыл бұрын

Thank you 👍😊

@sukeshdutta2333 3 жыл бұрын

Thank you Sir for your nice tutorial, but I am unable to join the slope d roof edges. Please give me tips. I am working on 2010 version.

@samkim5647 11 жыл бұрын

bro can you pls show! how to move the solid roof? i wont work here!.. when i click the second basement nothing happen!. no majic!

@ejmafive 10 жыл бұрын

whenever i move on solidedit command, the autocad would always reply: change in topology detected. i can't close the entire slope with any of the solidedit options including the offset.

@shyjuponkaran 8 жыл бұрын

Sir, i am student of autocad. i can't draw a tapper roof, when i am extrude the object with tapper, it is showing model operation error and gap cannot be filled. Please give me a reply

@sabeercad 8 жыл бұрын

Just follow the tutorial step by step , you will surly get the result

@nortonleodalewacas2658 6 жыл бұрын

sir when i tried to insert the taper angle it says"self intersecting curve"what will i do???

@sabeercad 6 жыл бұрын

+Norton Leo Dale Wacas Just create the Polyline once more and retry ..

@oluwasegunadeyoju4805 Жыл бұрын

Pls, on my AutoCAD 2018, the move is not applying to the roof but when I try offset it works but display the bottom of the roof on top of it as well. What can I do

@sabeercad Жыл бұрын

The same procedure works for al versions. Just follow it step by step

@SebFo-ls3er 9 жыл бұрын

HELP!!! If i decide to take out one window , eventually the wall will still have an empty hole at the place of the window. Can you tell me please how to fill up the empty space? Thank you in advance Mo

@shahidrehman2518 2 жыл бұрын

Very nice 👍

@jeanpierrenkinzi7899 Ай бұрын

Hello, is that possible that the video get french subtitles, please ? It's a really good video.

@maraksk3829 10 жыл бұрын

Bro I'm Having a problem while giving a tapering angle. I can't give a 60 degree angle. whenever i give it says cannot extrude the selected object.. please help

@anooprajanoop41 4 жыл бұрын

Thanks for this tip

@sabeercad 4 жыл бұрын

You are welcome 😊👍

@Vlog_kepo Жыл бұрын

🖒🖒🖒

@memes7424 2 жыл бұрын

thank you!

@eriksson3819 5 жыл бұрын

Thank you.

@harapanharapan7987 6 жыл бұрын

i love you bro

@sabeercad 6 жыл бұрын

+Harapan Harapan Thank u ☺

@Sharpz.1Q 10 жыл бұрын

matur nuwun

@sabeercad 10 жыл бұрын

Cahyani Widiatmoko Thanks

@johnthirdycubangbang4020 6 жыл бұрын

I was following your command step by step but it can't be move for the existing roof...i'm using autocad 2010 please give some advice how make it properly the slooped roof.

@sabeercad 6 жыл бұрын

+John Thirdy Cubangbang You may send the file to sabeercad@gmail.com , will check it and get bak

@tuandungtran5914 9 жыл бұрын

hi sabeercad, Im a student and i learn autocad 3D by myself, and i base on your tutorial to learn but i get a problem like that : when i want to draw a polyline in a plan xOy, the polyline was draw in a nother plan like xoZ. So i wonder what the command to choose a plan to draw. Thanks for your reply.

@sabeercad 9 жыл бұрын

tuan dung Tran You have bring the UCS (x-y plane) on the face where you want to create a polyline . Just disable dynamic ucs before aligning the ucs .(Ucs can be easily aligned using UCS/ 3POINT option)

@deepakborate5626 6 жыл бұрын

Hello Sir, I have tried a 100 times but cannot get the roof well. Getting stuck at the solidedit level. Followed same process again and again but not getting it. Its a polyline. Please help. Thank you

@sabeercad 6 жыл бұрын

+Deepak Borate If you closely follow the tutorial you will get the result . You may send the file in sabeercad@gmail.com . I will check it and get bak

@BAMcLuke 6 жыл бұрын

i had the same problem at first , but solved it by changinf my view to 2d wirframe and the selecting the face very close to the corner and it worked.

@talhagmalik9141 6 жыл бұрын

WHICH VERSION ARE U USING ?

@idarsidharta1391 6 жыл бұрын

Try to compare this technique. more interesting and easy click this link kzfaq.info/get/bejne/oJiddpuns6jHhKs.html

@geebee5398 10 жыл бұрын

got it!except for the parapet molding part...i can't create the pl arc, don't know what i'm doing wrong, that's why it won't extrude!hahhaha! (what i did was draw a different molding in wcs then made use of the 3d orbit then move it...)

@wasteitonmin5848 5 жыл бұрын

THANK YOUUUU

@sabeercad 5 жыл бұрын

You are welcome 😊

@arrakalkrishnan9 9 жыл бұрын

As shown by you I have extruded the profile in a tapered path at 60 degrees and with a height of 500mm. however when i try to move the top surface t a distance above the roof i get a message that there is a modelling operation error and there is no solution for a vertex.I am not getting the fuul sloped roof. Kindly advise where I am making a mistake. regards

@sabeercad 9 жыл бұрын

While you extrude dont give the extrusion height . Instead you can pick a point on top as I have shown in the tutorial.

@antie4ie 3 жыл бұрын

I cant do roof slope, every time i tried solidedit then face then extrude but never went full sloped. it always keep halfway but i did put high random number up to move

@sabeercad 3 жыл бұрын

Just repeat the steps all over again.

@zappmontenegro7012 5 жыл бұрын

Thanks men

@davetv4705 7 жыл бұрын

Great

@sabeercad 7 жыл бұрын

+Davidson Vincent Thanks ☺

@lovemoregoma1590 7 жыл бұрын

Davidson Vincent hi

@ejmafive 10 жыл бұрын

i figured out lately that my problem is a bug in autocad. i am using autocad architecture in particular. the bug lies to those who are using millimeter as a unit. solidedit command won't work if you are away greater than 1000 units in the wcs. anyway, thank you.

@jaimikpatel1487 6 жыл бұрын

thank you

@sabeercad 6 жыл бұрын

+jaimik patel You are most welcome

@idarsidharta1391 6 жыл бұрын

Try to compare this technique. more interesting and easy click this link kzfaq.info/get/bejne/oJiddpuns6jHhKs.html

@kyrioshaptism976 8 жыл бұрын

it doesnt work after solidedit, F, M... then when i move my mouse at the max. like what you did, then it goes to "enter faceng Editing ......" what im going to do ??

@sabeercad 8 жыл бұрын

+Kyrios Haptism Just report steps right from the begining . You can visit and Enroll at sabeercad.teachable.com for rest of the videos and 3dsmax rendering of this house.

@darylmalagum8307 8 жыл бұрын

hello sir? how can I access your private video? in the sabeer3d. Your video tutorials are very helpful, appreciated the effort of explaining things clearly and easy to understand. I will be grateful if you can give me access to your private videos

@sabeercad 8 жыл бұрын

+Daryl Malagum You are most welcome . You may visit and Enroll at sabeercad.teachable.com to get Life time access to all the tutorial videos on 3D visualization using AutoCAD , 3DSMAX and Adobe Photoshop

@charlessaifah-arthur3150 3 жыл бұрын

Interested i want to know More, and then the rendering aspect too

@willyberos1183 6 жыл бұрын

hi when im doing the solidedit command, selected face, selected move, then selected a base point, then selected a final point it doesnt do the magic. it says "Modeling Operation Error: No solution for a vertex."

@sabeercad 6 жыл бұрын

+Willy Junior Beros Just repeat the same procedure , from creating a polyline to see the Magic ☺

@kwesibanafo9717 6 жыл бұрын

'MAGIC' NOT WORKING! Error message: No solution for vertex. For weeks I struggled to understand what I was doing wrong. Sometimes the 'MAGIC' happened; sometimes it did not. Now I know why. Solution: After selecting the base point or displacement, make sure you DO NOT specify a second point of displacement which is too far (vertically) from your base point. Having said that, thumbs up to the owner of SabeerCAD. Excellent job👌.

@RoseAndato 6 жыл бұрын

I stuck on solidedit level too. I had to do 30 angular roof and I do this:extrude>taper angle>30 (maybe there is something wrong)>50; and next solidedit>face>move... and my roof is so high. Please help

@sabeercad 6 жыл бұрын

To get 30 degree Inclination for the roof , The angle of Taper should be 60 degrees (90 - 30)

@RoseAndato 6 жыл бұрын

sabeercad I forgot to edit but I did it myself. Anyway thank you 😊

@antonwijaya4991 6 жыл бұрын

try checking this one. this is quite interesting kzfaq.info/get/bejne/oJiddpuns6jHhKs.html

@idarsidharta1391 6 жыл бұрын

Try to compare this technique. more interesting and easy click this link kzfaq.info/get/bejne/oJiddpuns6jHhKs.html

@ajeneoteikwu6348 8 жыл бұрын

Thanks for the lecture sir.But the move face part didn't work when i tried it. the response was different topography detected. Can you please help me?

@sabeercad 8 жыл бұрын

+Ajene Oteikwu Just erase and recreate the Roof .

@ajeneoteikwu6348 7 жыл бұрын

Thank you, sir. Please don't stop your tutorials..