Autocad Tutorial Dynamic Block 2D Door With Stretch And Scale Actions

Рет қаралды 92,528

6 жыл бұрын

Learn Autocad Dynamic block tutorial how to create door with linear parameter and also stretch and scale action, check it out!!!
You can see our new tutorials with voice here:
Autocad Tutorial: • AutoCAD Tutorial
Autocad Tips & Tricks: • AutoCAD How To
Autocad 3D Modeling: • AutoCAD 3D Modeling Tu...
Autocad 2D Modeling: • AutoCAD 2D Modeling Tu...
Don't forget guys, if you like our videos please "Subscribe", "Like", "Favorite" and "Share" it to your friends to show your support - It really HELP US OUT!

Пікірлер: 35

@samyyoussef8380 6 жыл бұрын

The best ever on this point, very straight forward and helpful, thank you man.

@yorganxi7677 6 жыл бұрын

wow thanks!!! this was so far the best tutorial! thanks once again!!

@zero6two6 Жыл бұрын

Bless you sir. Helped me today 2022. Cheers

@noliabalon9021 Жыл бұрын

Very clear tutorial, thank you so much sir. From Philippines.

@MufasuCAD Жыл бұрын

You are very welcome

@inspiredbob4392 6 жыл бұрын

Sir thanks for uploading such videos. Please add more videos regarding 2d dynamic blocks.

@osoriojeronimo7667 6 жыл бұрын

SO HELPFULL.. TAHNK YOU

@anasazees7822 5 жыл бұрын

Very helpful. Thank u somuch bro :)

@jasonleonard3189 6 жыл бұрын

Great tutorial. If you wanted to add a rotate parameter to the door to have the freedom to change the door from 90 degrees to 30 degress, is there an action that you can add to the door swing arc so that it also changes with the door rotate parameter?

@Batool778 6 ай бұрын

Thank you for the clear explanation but it is not working for me the door rectangle gets shorter when i stretch

@jelenara9743 3 жыл бұрын

Thank u so sos much! Great tutorial!

@5041989lev 4 жыл бұрын

Thanks a lot!!!

@m.s.t2263 Жыл бұрын

thank you so much for the explanation dude

@rakeshvishwakarma3090 Жыл бұрын

Thank You Sir. very Helpful tutorial

@MufasuCAD Жыл бұрын

You are most welcome

@minaskomalath6819 6 жыл бұрын

wawooo bro very nice

@alimarzouk3905 6 жыл бұрын

Dear Mufasu thanks alot. Please could you tell me how can i get Autocad fabrication MEP .

@9356392778 3 жыл бұрын

Superb

@taylorrobison9790 6 жыл бұрын

This was very helpful! Do you know how to use the stretch command with an increment parameter by chance? Say I want to create a typical catch basin that has a certain length wing and those increments can only go up by 4' at a time. So I need a catch basin with a 4' wing, 8' wing, 12' wing, and 16' wing. I'd like to make it dynamic instead of creating 4 different blocks. Thanks!!

@R15HI 3 жыл бұрын

you can add a lookup table

@hassansadeghi 5 жыл бұрын

hi. I'm doing this practice but the process has one problem. when I make scale action to arc and then test the block. stretching the block will not affect at the end of the arc (a place where arc adheres to the door frame) doesn't stick on that point and goes further!

@guilhermehenrique577 4 жыл бұрын

you have to put the linear parameter right above the circle center and end point otherwise you`ll got distorcion at drawing

@Ryohgantz 6 жыл бұрын

is the mufasu cad owner indonesian ? please make video how to create 3d dynamic block, for simple example maybe, 3d dynamic block about pipe sizing 1/2" to 2". thank you

@moussadiab6527 2 жыл бұрын

thank you

@MufasuCAD 2 жыл бұрын

You're welcome

@enkhtsetsegerdenebaatar4275 2 жыл бұрын

How does wall line disappearing? Is there any format?

@nicolasfredette8564 6 жыл бұрын

Great tutorial brother... But take a second or two to explain what is the point of your "click here, grab this, select objects, click parameter... etc." just tell us what is going to happen/why we are doing it.