Had no idea this was possible, thanks for the video.

Easily the best video on this topic!!

BRILLANT

That was Brilliant, Thank you for sharing

Thanks, really great video!

Thanks for this! Awesome demonstration of the Dynamic Simulation Environment. I tried setting the gravity to Mars and the Moon. Lots of playroom.

A little late to the party, but I do have a question if you're still following this... Followed your tute as to-the-letter as I could. I've encountered two problems. 1) The wires/ball combo will not constrain to those horizontal axes the way they do in your video. It will snap to one, but it remains parallel to the suspending bars. It will not swing over 90 degrees to meet the second horizontal axis -- if that makes sense. And, I get a conflicting constraint error message. I remodeled the sphere/wires part, but the same thing happened -- AND -- this second time, the sphere is ghosted, and I've not been able to determine why. 2) I could not get the offset planes to work either. Whenever I input + or -1.5in, the offset plane would appear, but clicking on the green check mark made it disappear. Instead, I put in construction lines to act as snapping constraints. Thanks.

Thanks for this marvelous tutorial. You helped me a lot.

Hello, thanks for your video on Dynamic Simulation. Found it easy to follow and now have a new interest in Dynamics. I'm currently working on a design of a crane which has a simple moving load along a monorail and would like to work out how to do this in Dynamic Simulation. I have an Inventor 2022 model already drawn which I can send if you wish. Would greatly appreciate your feedback, would it be possible to get in touch.

first thank you for comprehensive video then i have problems! I just tried to follow every second of video but compare to your list under Standard joints i have another lots of stuff! like "Point-Line:2(Ground,ball:1) or Point-Plane:14(Grounded,ball:1) ...etc....realy mix up where i was wrong

You are amazing.. I am good for inventor and always i say that %50 i know in all of them. Thats way... Amazing.

Really cool. I would like to render it in inventor studios, is that possible. Having a hard time figuring out how to do it in that case.

Hi! I followed every step of the tutorial (which by the way, was excellent) but I need to know how I can arrange 3d contact because I thought it was only about selecting the parts but when I run the simulation, the first ball swings but does not make any contact with no ball. Besides, I noticed that for 2d contact, the edges of each pair of contacting balls were selected (3d compass is set at the edges) whereas for 3d contact, only at the center of the sphere the compass was set. Hope you can help me please!! Thank you :)

somehow i cant get the balls to swing free. I've replaced the constraints but when i try to swing the ball the entire construction moves.. any geuss on what i've done wrong? Awesome tutorial btw, thx!!!

just use Blender bro