Autoglym Ultra High Definition Ceramic Coating

Рет қаралды 66,062

Күн бұрын

Autoglym Ultra High Definition Ceramic Coating
www.repco.com.au/en/car-care-...
In this upload I delve into a newly released product for the Australian market from Autoglym.
It's their first go at an entry level ceramic coating and their newest addition into their UHD line of products.
Many are moving to ceramic coatings now. They provide superior protective capabilities, look far better and are only becoming easier and easier for the newbies to get into. This product is no exception.
It was fantastic when it came to application and left behind a brilliant, high gloss finish. Leaving the black SLK Mercedes I worked on looking like a mirror.
Minimal prep was needed before application, just the usual safe cleaning and then using their supplied preparation solution but for the purpose of this video I went a little further to show just how good we can get it looking, getting the most out of the product.
I was really pleased with the performance of it and keen to see how it holds up in the harsh Mildura weather!
I hope you enjoy/enjoyed this video!
TAGS:
UHD, Ceramic, Ceramic Coating, Autoglym, Review, How, How-to, How to, NCS, no copyright, free music, focusondetailing, detailing, detailer, detailing business, small business, Mercedes, SLK, SLK 350, cleaning, car cleaning, convertible, Repco, Australia, New, new release, keen, subscribe, follow,

Пікірлер: 55

@joevanseeters2873 3 жыл бұрын

This is a product I have been wanting to try on my wife's daily driver for a while. After viewing this "how to" I think I am going to give it a shot. I normally don't apply anything ceramic to my cars, but this might be the first one. Looks fairly easy to apply if you follow the directions. Thanks for the tutorial.

@michalisGT 5 ай бұрын

I have the same car and I get it coated in a detailed shop today.....amazing car and amazing the job you have done!!!!!

@mrek2068 Жыл бұрын

Brilliant video. I was lucky enough to buy a Jaguar XJ R-Sport, and it came with an Autoglym range of cleaning products, and I have been very impressed with the quality. Based on your video, I am definitely going to buy this ceramic kit. Many thanks.

@frankimpa 3 жыл бұрын

You’re a legend mate keep it up!

@focusondetailing3855 3 жыл бұрын

Thank you!

@slicenstab 3 жыл бұрын

Awesome video. Cheers mate.

@GanglandNewsAu 2 жыл бұрын

I'm loving auto-glym products. Just bought a new Beemer and wanted the best of the best... Although there's some much higher priced stuff around (guessing better?), I've found this to be pretty easy and super effective for DIYers. Was looking at this today, but hesitant... After seeing this, I think I'll out an order in. Thanks brother, subbed.

@Beer_Dad1975 Жыл бұрын

Really hard to say if the higher priced stuff from smaller manufacturers is really "better" than the mass produced stuff from the big players - there is a LOT of snake oil marketing in the detailing industry - for my "gut feel" - companies like Autoglym have the money to pay for top end in-house R&D people and facilities and extended trials, not to mention proper manufacturing QA - whereas small players are probably not going to have those capabilities & likely rely on a lot of outsourced labs etc. - so it wouldn't surprise me if big player products actually out-perform the "boutique" suppliers a lot of the time. No evidence to back that up though, just my thoughts...

@barrybij8079 3 жыл бұрын

looks like a nice kit...

@riverlander8866 3 жыл бұрын

Hi mate the way I do is just put both bottles and a bit of that ultra foam in the snow thing you put on your pressure washer.. The more powerful the better as it blows the bugs off at the same time. Last step sun dry.

@79blustone 2 жыл бұрын

Gyeon Q2 can coat lasts longer as a semi protective coating. People have said it last 12 months rather then the 3 months max Autoglym provides. Still great for presentation and to get a feel for ceramics for someone who isn't confident with a machine polisher if things go wrong with a harder ceramic product

@patrickvennard838 3 жыл бұрын

We have had this in The UK for a while now, lots have channels have done long term tests that show the coating failing after two months. I think Autoglym need to up their game. Nice video keep them coming.

@CM-ch5vc 3 жыл бұрын

Yea, a lot of OTC stuff unfortunately doesn't last

@roveism 3 жыл бұрын

This is a very useful comment, thanks Patrick!

@tonyhill1916 2 жыл бұрын

I've had waxes and sealants last much much longer. I thought ceramics were 'the future'.....maybe not!

@mozaahsaseve8007 2 жыл бұрын

Cquartz 3.0 handsdown the best in today market!!!

@hu55a1nm 2 жыл бұрын

Can I apply Autoglym ceramic coating after applying Autoglym super resin polish

@Akira.Nibbai 3 жыл бұрын

Wouldnt the prep solution remove the resin polish?

@mrek2068 Жыл бұрын

Great video. I am torn between using Armour Shield IX or Car Pro CQuartz UK 3.0, topped with SIC as a ceramic coating. Which would you choose?

@dimitrischaidas6148 Жыл бұрын

Hello, I want to ask you how much time I need to wait for Super resin Polish to dry and then put the Ceramic Coating Ultra High Definition?

@matthewmason4425 Жыл бұрын

I just added this to my collection of products from autoglym and have already done the previous steps and doing the ceramic today What’s the best way to wash the car with out undoing what I have done ? Can I wash like normal using magna ? Then the ceramic spray ?

@hadiskids321 3 жыл бұрын

Early!🔥✌🏼

@Anonymous-mv9bm 3 жыл бұрын

How many cars can you do with one bottle

@keithmac3001 3 жыл бұрын

The merc looked like it had been fully prepped. After I detail paint I’m gonna use da polisher and two stages then apply this on to corrected paintwork like you did??

@kenlawton1531 3 жыл бұрын

Tim, nice demo mate! How much of the 100ml bottle did you use for the one car mate?

@focusondetailing3855 3 жыл бұрын

Thanks! I'll have to have a look at the bottle again but I don't think even a quarter was used

@adylol162005 3 жыл бұрын

nice work bud! how long did it took from start to finish the whole process? Cheers!

@focusondetailing3855 3 жыл бұрын

Cheers! It took around 6 hours. That was with me trying to film to process too

@doug774 Жыл бұрын

Green is the prep cloth and red is the finishing cloth

@paulhoward4161 3 жыл бұрын

Wouldn't the SRP act as a barrier to the CC bonding to the paint?

@focusondetailing3855 3 жыл бұрын

Hey Paul, I only used SRP as I wanted to stick with the theme of using Autoglym products throughout the video. I used it to remove the minor defects and I probably should've gone for a product without protective capabilities but the preparation solution would've disposed of anything left behind anyway. Getting it ready for the ceramic coating. Thanks for the comment

@jeremykhuu 3 жыл бұрын

How does this compare to bowdens own bead machine, I know BM isn't a ceramic coating but im just wondering how does it compare. Loving the vid man

@focusondetailing3855 3 жыл бұрын

I think the Bead Machine is a little easier to apply but not too sure if it has the same protective capabilities and lasts as long. Both look great and have some impressive water repelling abilities. Thanks for the comment

@alibabakhan8358 3 жыл бұрын

How long did this whole process take? Wash to finish?

@alibabakhan8358 3 жыл бұрын

Oh found my answer in the comments below 😅

@vegardbell 2 жыл бұрын

How many cars with one bottle?

@muggyJBeast 3 жыл бұрын

Amazing video as always! Have been wondering about this product. That foam applicator looks amazing! Do u think u could that say on carpro cermic

@focusondetailing3855 3 жыл бұрын

Thanks mate! That applicator was great and helped coat the car quickly and evenly. I'm assuming you meant, "could you use it with CarPro Ceramic?" If so, I don't see why not

@muggyJBeast 3 жыл бұрын

@@focusondetailing3855 yeah thanks for that would u know where u could applicators like that

@anuruddhadissanayake4881 2 жыл бұрын

I really love Autoglym products. They give amazing results. Can this ceramic coating be applied on glass ?

@jeanpierregalea9048 Жыл бұрын

No it is not advised. Only for paintwork

@dream-zf1th 9 ай бұрын

yes you can

@hadiskids321 3 жыл бұрын

Hey mate can you do like a 100$ Detail budget???😁😁

@focusondetailing3855 3 жыл бұрын

How do you mean by that mate? Do you want a video of me detailing a car spending no more than $100? It's possible but my pressure washer alone exceeds that haha

@hadiskids321 3 жыл бұрын

Like you can use the pressure washer but your detailing items need to be under 100$ is that possible mate!

@focusondetailing3855 3 жыл бұрын

@@hadiskids321 for sure! Definitely achievable and 100% video worthy it just comes down to how detailed the process would be as the price does increase quickly 😅

@hadiskids321 3 жыл бұрын

FocusOnDetailing Yea!😅😅😅

@losttheplot26 2 жыл бұрын

Just use wash soap for clay lubricant.

@BMan100 2 жыл бұрын

....I wish we had the UHD shampoo, I missed out on it before it went off the market last year.. (only Canadian tire in Canada sells autoglym)....SO MUICH GOOD STUFF WE CAN'T GET!!! ARGH!!!!... ah well, at least my cars all covered in PPF.

@FeelFree3 3 жыл бұрын

Last for 12 months is short compare to other ceramic coatings.

@BAYEP 3 жыл бұрын

Also not $800-$1000 plus and DiY....?

@funfunyo7523 2 жыл бұрын

I will stick with uhd wax you cant f that up and it lasts 3 or so months with aqua wax every second of third wash

@AegisHyperon Жыл бұрын

that paintwork has some pretty bad orange peel going on

@SHOOTER03 2 жыл бұрын

So I thought for a product to be a true ceramic coat it couldn’t come bottled in plastic cause some of the solvents aren’t safe in plastic. So this product isn’t a true ceramic coating.