No video
Automobilista 2 Force Feedback Settings 2022 - Custom FFB Setup Guide
Рет қаралды 54,266
Күн бұрынWith the new update in Automobilista 2 it's sometimes a bit tricky to find all the right settings, especially for FFB. But luckily for all of us, just one single file can change the whole AMS2 experience forever. In this Custom Force Feedback Setup Guide, Champion Joe will show you, how to get everything up and running.
What are you doing to further enhance your experience in AMS2? Let us know in the comments! 👇✍️
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Reiza Studios: forum.reizastu...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
📺 Watch more interesting videos:
Automobilista 2 - 10 reasons to start playing
➡️ • Automobilista 2 - 10 r...
🔔 Subscribe to us for more reviews, tutorials, interviews and more!
www.youtube.co...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Follow us on Social Media!
Website: www.overtake.gg
Twitter: / overtake_gg
Instagram: / overtake_gg
Discord: discord.com/in...
Facebook: / overtake.gg
Twitch: / overtake_gg
Follow Jonas on Social Media!
KZfaq: / championjoe
Twitter: / championjoe7
Instagram: / championjoe7
#AMS2 #ForceFeedback #SetupGuide
@SlowBloke123 2 жыл бұрын
Rfuktor files are epicly good. Karsten even did a version for me after I moaned about the big bumps just being to drastic for me on my dd1 whilst maintaining heavier cornering. Easily my favourite ffb of any sim with the file.
@MrLuumpy 6 ай бұрын
Total game changer! Did this Rfuktor file for my Cammus C5. EPIC improvement. Thank you,
@CaptainCrunch99 2 жыл бұрын
Good video, but you should’ve gone further into what you see in the FFB HUD widget. This can tell you a lot about the LFB balance and also the gain levels and if you are clipping the levels at peak torque situations. If you are clipping the FFB, it won’t damage anything, but it will saturate the system and tend to deaden some of the fine details while in the clipping areas. You can notice in the widget if you are clipping by the last histogram bar turning red. If red appears, just slowly lower the gain until the red is gone.
@wagnerviscardi4399 2 жыл бұрын
Man, this game is fucking good!
@Fergy00000 Жыл бұрын
Well that changed everything. Excellent FFB file that made a huge difference. Thank you.
@markod7662 7 ай бұрын
Over the years i have played a couple of games. Started with richard burns rallye, rfactor and then played assetto, ams and now ams 2. Settings are in games always explained badly or not at all. And settings can make or break experience in any sim. So hats off for tackling this topic. Needless to say settings in every sim nees much more attention. I downloaded this file and i feel like my ffb is boosted. Even on an old potato like thrustmaster t150.
@zethyuen8859 2 жыл бұрын
Thank you for always giving great tutorials and advice for games! It has really been awesome!
@OverTake_gg 2 жыл бұрын
Glad you enjoy it!
@skorpiopowersimracing1923 2 жыл бұрын
Thanks man ... I usually race on AC and used to do PC2 as well... Loved it to bits but had to stop playing since it kept reseting my AC wheel setting and needed to set it up every single time !Tried AMS2 but deleted it after 4 hours of failing miserably lol .. Now with the latest update and your video I am convinced to try AMS2 it again ) I will let you know how it goes, thanks for this setup and have an awesome race ..
@ranakirti 2 жыл бұрын
Update?
@skorpiopowersimracing1923 2 жыл бұрын
@@ranakirti AC has me hooked so much ... Still can't get AMS2 to feel nearly as good in terms of FFB
@arride4590 2 жыл бұрын
Ow what difference! I have a G29 and with this file the ffb is very simular to Rfcator 2. Guys, try it!
@vitprochazka6868 2 жыл бұрын
Can you post your settings? I mean in game ffb one . I tried it, but found default + still better. Maybe I'm missing something...
@DanDiMaggio 2 жыл бұрын
@@vitprochazka6868 you’re not missing anything. Default plus definitely feels better on the Logitech wheels. I believe this file is for wheels that have more dynamic range than ours. I was constantly spinning with this file. Went back to default + and feel much more in control of the car.
@revolverocelot3741 2 жыл бұрын
Felt much better right away, dankeschön :)
@kernow-alan Жыл бұрын
I know its fairly oldish video, but still relavant. A huge thank you, the most informative and constructive Video i have seen explaining what does what and how best to configure FFB. Again Thxs 😀
@OverTake_gg Жыл бұрын
That's what we are here for. Thank you! 💪
@molebwoy2608 2 жыл бұрын
great video,helped me alot.Dont forget you can adjust gain for each car in the tuning setup
@lamesheepracing 8 ай бұрын
Thank you. This helped me improve the feeling of the cars.
@mmarkotan 2 жыл бұрын
For me, coming from AMS1 and this still being my "go to" sim, default+ feels the closest to the original AMS feel, therefore I prefer this ffb file to all the others.
@bsmracing6592 2 жыл бұрын
somehow Default+ feels better. for PCars2 CustomFFB was a necessity.
@UnboxRacing 9 ай бұрын
Agreed default+ working better for me after the latest 1.5.4 update
@zeahroela 2 жыл бұрын
Tried this profile with my Thrustmaster TS-PC and definitely felt horrible. Regardless messing with game settings it was way to bad, even with FX at 0 all I had was weak forces and a bunch of useless "noise". Default+ feels awesome, gain at 55, low force boost at 25, FX at 40 and damping 0.
@jpgreewal4 2 жыл бұрын
Thanks for the video and showing us how however reverted back to default Plus which I felt was better
@thomaswyatt199 2 жыл бұрын
I just bought AM2 and Rfactor 2 on the steam sale and AM2 ffb felt like crap and I found it very hard to push the cars on the limit this file completely changes that but Rfactor 2 still feels better plus has some of the best free content.
@A2-RC Жыл бұрын
I wished this was going to help but no :( I'm using a Logitech Pro DD wheel. I tried the custom profile and it's so much worse than default. AMS2 never felt good and I just can't dial this game in. FFB is really weak even at 100% gain and the details are all mushy. For reference, AC feels really good. ACC feels absolutely unreal. Both have really strong and detailed FFB that I just can't get in AMS2. It makes me so sad because AMS2 has so much content I want to play! ;-;
@TheVOVA77 Жыл бұрын
Yeah, i have the same problem as you with my Logitech Pro in AMS2! ACC et AC force feedback is perfect.
@mh7711 Жыл бұрын
Same here, I come from ACC to AMS2, hoped that the FBB is a big upgrade in AMS2, but the opposite is the case. The FFB in AMS2 (with this modded file and Ams2 new physic-car) feels so muddy, nearly no details, weak curbs, no difference driving on grass, only force for turning the wheel. Dont know what is happening and I am searching for solution or if this is normal in AMS2. I am disappointed now
@mh7711 Жыл бұрын
Yesterday I tuned several hours the FFB, for me the old physics work better, more Details. Also the default+ Profile is much stronger than the custom downloaden file, even on stengh =90%. dont know why the custom Profile is so exrremely weak (the force). the custom file feels like 1-2 nm force, the normal default+ like full 8 nm forxe
@WANWAN-gj6rl 2 жыл бұрын
Nice setup feels great
@edteach3r 2 жыл бұрын
Great video, thank you.
@OverTake_gg 2 жыл бұрын
Glad you liked it! ❤️
@vitprochazka6868 2 жыл бұрын
Idk, I still found default+ more detailed of road etc, than this custom.. Maybe I have "only" g29?
@TheCameltotem 2 жыл бұрын
Same on my simucube 2. Default and default+ are just great.
@HDRGamingHub 2 жыл бұрын
I think they nailed it with the default+ !
@looteyes 2 жыл бұрын
Thank you for this tutorial.
@OverTake_gg 2 жыл бұрын
You are welcome! 😊
@scuderiabazzane6064 2 жыл бұрын
The counterpart file for PC2 changes the user experience as well… it’s another sim
@flaviochyna7 2 жыл бұрын
excellent video!!
@andrewsmith8626 2 жыл бұрын
What are your settings for the CSL Elite? Its the same rig I'm running and the braking & control just feel off, really struggling to get to grips with it and enjoy.
@tigerbalm666 2 жыл бұрын
Just got Atm 2 5 min ago!
@charliebeckey6269 2 жыл бұрын
I thought the damping setting was more related to how much weight or "friction" is in the steering system. Would power steering level be more related to the gain? Higher gain means it's unassisted and you need to provide more of the steering force.
@inkjazz 2 жыл бұрын
Normally yes, but the person who made this custom ffb file changed what damping controls for this custom file.
@charliebeckey6269 2 жыл бұрын
@@inkjazz I realized that soon after writing the comment :) Thanks Chris
@arraurrul 2 жыл бұрын
hi bro!! can you feel the understeer efekt like on assetto corsa?
@taxi615 Жыл бұрын
Do we have to set the gain for each car every time I get into a new setup the gain is 💯 and I have to turn it down. You would think you could have a general gain
@discodan2265 2 жыл бұрын
Can anyone help me I can't map the drink button. Damn and I get so thirsty during a race too!
@flaviochyna7 2 жыл бұрын
I did everything you recommended, but I can't feel the grip of the front tires on the steering wheel. when I go straight ahead (the front tires slip) I don't feel any variation in the forcefeedback, as with the Assetto Corsa, for example. Am I doing something wrong? I use a Thrustmaster TS-PC.
@youngganghis5236 2 жыл бұрын
Likewise. I have the same wheel, btw which rim are you using? I'm using the 488 ferrari wheel in the advanced mode on the thrustmaster control panel. Didn't have much time to configure but I drove the porsche Carrera cup 4.0 around the Cascais alternative layout with this video settings and decreased the car ffb gain to around 80- 85% and started to feel more road detail and weight transfer but still felt off. Tonight I'm gonna try to configure from the 0 and see what I find
@darrenwright6713 2 жыл бұрын
Hey can I please ask what your wheel settings are as I'm using an elite too.
@UnboxRacing 9 ай бұрын
How are these working with the latest update?
@MrLuumpy 6 ай бұрын
Is there a similar type file for ACC ?
@damasogarciabatalla9661 2 жыл бұрын
I have created a ew ffb custom based on heavy messin ffb custom, i have improve this setup in my opinimon if you wanto to try ir tell me mate, cheers and nice video
@azzazz4549 2 жыл бұрын
The cars have individual ffb in the tuning menu
@effinjamieTT 2 жыл бұрын
The ffb isn’t the problem with this game. The fact that if I even look at the brakes it sends me into an uncontrollable spin. Brake sensitivity min/max makes no difference whatsoever. I also race ac, acc, rf2, raceroom and I don’t have this problem in any of them.
@Simlife101 2 жыл бұрын
@effinjamieTT something wrong with your end then because that doesn't happen to me and I use simagic p2000 hydraulic pedals and I have great range for trail braking.
@abuelb 2 жыл бұрын
@@Simlife101 what is your brake setup for cars. It seems that every car i drive at default setting would lockup the wheels. I watch my brake meter hud and its not even hitting max pressure. Whts the deal with this. Tried Adjusting every parameter sensitivity both ingame and CSL DD, and nothing works.
@abuelb 2 жыл бұрын
The physics is the biggest problem with this game. Everything is overly sensitive. Oversteer, torque steer on corners, wheel lock ups, ice on grass. Its the only game that gives me problem driving.
@effinjamieTT 2 жыл бұрын
@@abuelb very similar problems to what project cars2 had
@buzzin-hornet Жыл бұрын
Try adjusting the brake bias in the car setup menu. If you are losing the rear of the car, try moving the brake bias forwards and if you find that you're locking the front tyres. try moving the brake bias rearwards.
@pek3d 2 жыл бұрын
For all the wherls? Can I use it with g29?
@mmmarac 2 жыл бұрын
Yes, you can. There are tunes for most used wheel brands.
@Leopard9622 2 жыл бұрын
when i'm using the custom profile, the CPU usage goes up a lot and even impacts the FPS......I'm using 5600X + 3080TI.....not sure why....though I'm quite satisfied with default already
@Simlife101 2 жыл бұрын
I have the simucube 2 pro so what setting should I have on my base?
@jogb9515 2 жыл бұрын
I'm a bit confused: why download profiles, and then go in and change all of the adjustments (Gain, FX, Damping, etc)? Isn't the point that someone did that and they feel really good? Also AMS2 is awesome.
@OverTake_gg 2 жыл бұрын
Hey Jog! The Custom File changes how the physics in the game are put out to you as a player through your wheel. The sliders adjust how strong that happens. As every Wheel is different, this is super important to set up 😎 I hope that answers your question! Regards, Joe
@jogb9515 2 жыл бұрын
@@OverTake_gg Thanks!
@Simlife101 2 жыл бұрын
@@OverTake_gg how do you choose your wheel base settings though? If I don't have the right wheel base settings on the base its self it would all feel different
@77RogerRamjet 2 жыл бұрын
Since Default + I find all these custom files to be unnecessary. They were goid in their time though.
@fuckjoebiden 2 жыл бұрын
@@ueberlicht_ shut up redditor
@makemystronger..freemegapi6800 Жыл бұрын
Your whell? Logitech?
@darkstar5802 2 жыл бұрын
Das ganze gerne auch in Deutsch, wäre super
@msrtincollins8233 2 жыл бұрын
depends on what wheel
@elconcord6833 Жыл бұрын
Is working in thrustmaster tgt 2 ?
@anthonyhoffman6052 2 жыл бұрын
i dont care how much Reisa tweak AMS2 it will always be PC2 and a therefor a pile of rubbish. zero sense of tyre/road grip/slip in the tyre model/game engine and FFB. nothing in the feel is intuitive or natural. terrible. tried this file. terrible. default+ much better. how long have Reisa been tweaking this? 2 years? AMS2 and madness engine is just crap. AMS1/rfactor engine and real feel was so much better. took a few laps to sort the real feel FF for each car but there is no comparison to this rubbish in AMS2. unfortunately most noobs think stronger forces are better. they have no idea.
@youngyingyang 2 жыл бұрын
5.0.4 is out
@Danecay 2 жыл бұрын
Hi! And where is it? I can't find it in the official forum, tere the latest version is 5.03
@testdirver 2 жыл бұрын
my big problem with ams2 is the nearly to imposbile trail braking
@flyingphoenix113 2 жыл бұрын
What problems do you have trail braking in AMS2? Wheel locking? Entry oversteer? General lack of FFB while trail braking? Trail braking generally works quite well for me in AMS 2.
@testdirver 2 жыл бұрын
@@flyingphoenix113 mostly with the gt cars spin most of the time, and i never spin, until i meet ams2
@Simlife101 2 жыл бұрын
@@testdirver you sound af if you've been playing iracing lol. Trail braking in iracing is wrong as I drive in real life and if you stay on the brake that long in real life you lose loads of time and can spin where as AMS2 trail braking feels more realistic
@testdirver 2 жыл бұрын
@@Simlife101 really improve these year, still for me acc have the better modulation and easy load cell setup
@AlphaXiro 2 жыл бұрын
Got any forza clip or carx drift?
@edwardjam9832 2 жыл бұрын
This game supports VR, why is this guy playing with a monitor?
@Simlife101 2 жыл бұрын
@Edward Jam not easy to record in VR and some people will always pick triple monitors over VR for clarity and fps me included. I have the valve index and triple 32in set up but race in VR very rarely. VR is not comf when sim racing for more than 40 mins for me and then I want out of it but triples I can race for 6 to 8 hours easy
@discodan2265 2 жыл бұрын
Kuku maddog's latest file in the same thread is the best for my sc2 pro. I've spent the last 4 months going through every single custom file on the thread. *disclaimer for any whining bitches out there who want to disagree this is op based ; }
@Simlife101 2 жыл бұрын
@Disco Dan do you have any good ffb settings for the SC2 PRO is self. And which custom ffb file should I use for AMS2. Also are there any custom profiles for Iracing like this for Simucube 2 pro.
@discodan2265 2 жыл бұрын
@@Simlife101 hey mate since the recent ams2 update I've been using karsten's latest file and Danielkarts latest v40 from memory. You can find the thread and downloads on Reiza's forums under the title 'Custom force feedback'. Just go to the latest post and work back from there. For the Sc2 pro and true drive settings it is purely subjective though generally I personally settle around 80% strength, 1minimum force reconstruction, Unlimited frequency. Around 20-25 dampening, 8-10 friction and 6 inertia. All other settings at default. I have tried messing with slew rate on some titles which can add a nice rubber effect at very low levels though you will lose finer details. The force reconstruction filter is the main one to go to if things feel too sharp. Just increase by one whilst in game as it will update live. Hope this helps 🙏
@justinhill9915 2 жыл бұрын
If u want to test at a bumpy (shit) track run around Sebring for a while and it will knock your teeth out!
@Weyco23 2 жыл бұрын
That would work if the track was in AMS2, it is not.
@2ndLastJedi 2 жыл бұрын
If only AMS2 had Sebring.
@RK-io2os 2 жыл бұрын
Tested it, ffb shitty like always, forget it
@TheKwod 2 жыл бұрын
AMS2 is uninstalled.
Alex Kay
Рет қаралды 16 М.
MAWvR3ALITY
Рет қаралды 2,6 М.
Real Civil Engineer
Рет қаралды 891 М.