Very cool, happy to help! I’ve probably gotten the most emails about this vid saying “Thanks”! Or “this really helped!”

Sorry I'm just getting back to you, How'd it go? It's weird that this little video I did has helped so many people straighten out their doors! I get emails all the time from people just like you that are like "I just moved it 1/8" and it's Perfect". Happy to help, hope yours got straightened out as well! Thanks for watchin as always!

I just did my hood on my charger again and you gotta just keep at it. First I'd say make sure there's no slop in the hinge, then you gotta just keep playing with it to make sure it's doing what it should. A tiny adjustment on the hinge can change the gaps drammaticallllly! Good luck bro~

@@ClarksPlace thanks for the tip!

@@kountrylr23 I don't know everything, but I know a couple things.

Lol I just appreciate you taking time to respond, but doors are a pain. This my first restoration. An I wasn't expecting doors to be something I would struggle with lol.

@@kountrylr23 I hear ya, I did a lot of work ahead of painting to hopefully get mine in the right spot, I don’t wanna do mine again!

Yep, I believe so. Remember when your mom or dad told you not to lean on the car door when it was open, or not to lean on the window??? Mine did! Seriously though, yes, parts wear and with the wear can move slightly causing window alignment issues or door alignment issues. I had to re-weld in metal on to the door hinge because it was all worn back like melted away!

@@ClarksPlace Thanks i have this occuring on a 10yr old audi only on the passenger side, i guess the previous owner didn't get the don't lean on it memo.

@@lucasboyle959 I'd pop the door panel and with the window all the way rolled up, try and push the window the rest of the way into place. Then let go of it and watch for anything that moves. It should relax and you'll be able to tell if it is just a worn out plastic roller, or a guide that wiggles. One way or another it sounds like with either an adjustment or a cheap replacement part you'll be back in business. Good luck to ya!

I had another guy tell me that too, they bolted them up and were like "These don't fit at all!" Ya gotta adjust em!

I don't know what Pixo is, but if the hinges were destroyed, chances are that the places where they mount were jostled around a bit as well... if you replaced the hinges, you might take a straight edge along where the hinges mount and just see if everything looks straight. You might be able, in a pinch, to shim a little bit behind the hinges to kick the door in or out depending on what it's doing. if it clunks down and falls off, that sounds major like the hinges aren't doing what they're supposed to, I'd check to see where the point that it falls off is, then you'll find your problem. Best of luck Tamara!

@@ClarksPlace Thank you. It makes sense 😃😀. I only did a visual check and the lower a-pillar looked ok. I will recheck.

If you're talkin a B-Body, or prolly most Chrysler's of this era, you will need to take out the inner fender splash shield and it's possible but not ideal. I'd use some adjusting head ratcheting wrenches and you can probably get to each of the bolts. Take out the kick panel (if it's installed) and you can get to the inside of the hinges as there are bolts that go from the inside to the out through the hinges. From what you're saying, if it's like my door shown in the vid, you should be able to adjust it to get what you need without actually moving the hinges from the inside, but more just adjusting where the door is sitting on the hinges. Look at my latest vid and you'll see me hanging my doors and all the adjustments I do to get them perfect. Hopefully you can see how we kick out the top and bottom from this example. kzfaq.info/get/bejne/mbl7pqyJ0J3Yio0.html Good luck!

@@ClarksPlace Thanks for your reply and vids, my car is a 73 Challenger. Those shields are not installed and there is no interior yet So i can access all those bolts

@@dennismaxwell165 cool cool, I'm kinda in the same situation with getting all my body panels lined up right now before paint. I don't want to have to adjust the doors after paint, but once I put the interior and glass, and regulator arms and hardware, etc, I hope my door doesn't drop down too low... All the planning I've done and I'll probably still just have to let it fly how it is and adjust if necessary.

Move both your hinges up a MM, or, you could probably just loosen the bolts that go into the door and kick it up just a touch, but there’s not much adjustment up and don on the door