Brother your ripping! We got about 5 to 6 inches of snow ❄️ and more is coming, so I'm going to be camped out in the garage working on the bikes ans engines 😅. Thank you, yes it is very beneficial area and the people are pretty good too. 👍 ride safe and keep me posted on your build too! ✨️ 🎉🎉🎉🎉

😂😂😂😂😂😂😂🎉🎉🎉🎉 that's right! And when they do see me, they mostly just point and laugh and I'm 100 percent okay with it 😂😂😂 🎉🎉🎉🎉 thanks for the comment. Make me laugh.

Brother..... you where right, I'm loving this engine 😍. Interesting! I really need to get a small fp torque wrench 🔧 😫 😅 what you just stated makes perfect sence. I'm going to do that next time I'm out riding. We'll when the snow is gone. We are sitting with about 5 to 6 inches right now, and they are saying we are getting another 3 to 5 inches tonight 😢😢😢.

Thanks Evil 😈 🙏 so far I'm loving it.... but we have a lot of snow right now so it looks like I need to learn how to port till the snow is gone. 😅😅😅

SKIP!!!! thanks, man. This bike has my heart.... don't tell the others!! 😂😂😂😂 bro those plains you made are cool 😎!

🎉🎉 thank you very much brother! The stock pipe is interesting indeed. Basically it's a smaller version of the Badass Shark silence . I could literally bolt up the Badass Shark right to it. Might have to for fun 😂😂. I do agree about the sound, it thumps like a deep drum rather then a the whining sound. Keep up the work brother, your videos have been straight mint 👌 I've never seen a defect that bad on a motor before 😅😅

Thank you, Leo!!!! Keep the chicken 🐔 warm! We are getting more snow tonight! Dam! Hahaha

Brother, I was having a hard time not going to fast durning the brake in 😅 she just wants to go! I'm impressed 👏 😎

@@grendelsgarage9723 I understand that brother we all get in the gas it's hard not to

🎉🎉🎉🎉🎉🎉 Let's go, boss! Let me know how it runs 🏃‍♂️. 2 runs and I'm loving it. Snow finally hit us 😩 😫. Going to be a bit before I get her back out.

I've been looking at those 1mm spacer from Smokil Performance, a little gasket maker, than that 1mm spacer, plus or minus 1 base gaskets might put us at 6mm to 7mm piston squish ish 😅😅😅 hard to guess till I pull the trigger and do it.

Could agree more. Hard to sit and wait for people to make pipes for them.... I need to get better at welding 😅😅😅. Thanks brother, hope your well.🎉🎉🎉🎉🎉🎉🎉

I was only able to get 2 runs on her before the snow hit us... it's been so much fun. I know speed isn't everything, but having a little helps in traffic and having a good mid range helps too. I think the Avenger 85 fits both shoes 👞 👟 well.

Bro, this motor is on point 👉 can't wait to get it ripping

Thanks bro! What a ride hahaha 😆. Hope you got your parts mounted up!

@@grendelsgarage9723 you welcome & I have got to it yet I mite just start on my other project and get back to it

​@FMonster1550 bro I get that! I've been thinking about rebuilding some old gameboy colors. It's something I use to do for fun before motorized bicycle 😅

@@grendelsgarage9723 i feel you on that one 😂

Yes sir!!! I ended up getting the head and a pipe and wow... just wow!! Sorry for the late response rides safe!

It's just a cheap ammo can off Amazon. I drilled holes in the back and zip tied it down to the rack. Love it. I have had 0 issues with it.

Hope you're well 🎉🎉 the arrow on the filter points 👉 down towards the carb, so I was thinking that indicateted the duration of gas flow. Sorry brother, but the laugh is here to stay. People have been giving me poop about that for 25 years 😂😂😂😂😂 It just might be spring when I get her back out there. We got hit with 6in of snow, and now they are telling us 3 more inches! Thanks for the honesty comment 👍 hope your weather is better there. 🎉🎉🎉🎉

​@@grendelsgarage9723#1 I wasn't paying any attention to the way you laughed. So it didn't seem cringe or annoying to me. #2 Fuel filter, if it's clean, I blow thru each side to check for which way has less restriction. To know which way to install it. #3 Many say there's no need to run an air filter but I'd at least use a fine mesh screen. Something small enough to keep dirt out but not so small it restricts air flow. The fine mesh screen I use doesn't restrict flow & without it. I seen dirt getting into my carb bc it sits so close to the rear wheel. The Avenger will probably be my next kit. I have a nasty jack pipe I wanna weld up to fit it but gotta wait until I either get a 120V AC flux wire welder or 240V outlet & gas for my MIG welder.

@michaelbrinks8089 I was thinking about it a little more 😅😅 and I think you're right about using a mess for the carb. Just got done cleaning the one from the Wild Cat 🐈 80, and boy, it was dirty!!! Brother, I also have a Nasky Jack pipe that I was thinking about covering to fit the Avenger 85. Let me know if you get one. 🎉🎉🎉🎉 thanks for all the feedback. ❤❤ ride safe! 😊

@@grendelsgarage9723 When you look at the airbox & air filter design on my motorcycle that's hidden under the seat in an enclosed area. You'd think that there's really no way any dirt could get inside just from street riding. But 6 months after putting a new air filter in. It'll have dirt on it & there'll be debris like little pieces of leaves in the bottom of the airbox that needs cleaned out.....If an Avenger 85 top end kit was only $25 & readily available. Like the 47mm kits, then I could understand why people wouldn't bother with a filter. I cut a big hole in stock plastic cover. Got rid of the foam filter inside & zip tied/glued a fine mesh brass filter screen over the hole....What's kinda ironic is, an Avenger 85 engine on a mtn bike or bmx bike. Is actually more fun to ride than a 700cc street cruiser motorcycle. It's hard to decide what to build on a poor man's budget. I'm thinking for now I might be better off just adding a 750w front wheel ebike kit to my current 49mm iron sleeve 29in Mongoose build with 48 spoke wheels. Since it can easily go 40 mph...For a 2wd hybrid, in 750w ebike only mode would be 100% legal on street if stopped by the 👮.....But the extra weight problem comes into play. The weak link is hubs, bicycle tires & aluminum bicycle frames not meant to hold over 300 lbs & go 50mph...My ultimate 2wd hybrid build would be something like a full suspension 26in diy phatmoto bike. With BMX style riding position for on/off road, using a reinforced steel bike frame, with rear suspension built in, 19,20 or 21in moped or motorcycle rims & tires, strong Gemini rear hub, a beefed up fast 100cc 4 stroke engine that can cruise at 45-55mph & a front hub motor kit like a 1000 or 1500w labeled as a 750w. So in ebike only mode you'd be 100% street legal. The 2wd bmx riding position would rip off road on 3 to 4in wide 50/50 street/dirt motorcycle tires.....OK OK I'll stop typing now, I just want something that can replace a motorcycle that gets better mpgs, less maintenance & doesn't need plates, registration,insurance,etc...

@michaelbrinks8089 Brother, that was a lot, but all good stuff. I'm not sure about your laws and jazz, but maybe a mini bike might be what you need. I've been thinking about getting one, but like you said, I don't want to go through the legal jazz. Maybe shoot for a steel frame. Let me know what you go with.

@@glennford2493 how's it running??

These bad boys have a 52mm piston. With the new head and pipe, it's killer brother. A flat killer. Hahahaa

I ordered this engine from Ken Hinson off of Facebook. If you look up the Avenger 85 on Facebook, you will see some groups that will point you that way. There is also eBay and californiamotorbikes.com. good luck!

I'm rocking the insta360 x3. She is a little spendy, but the way I look at it, you're paying for 2 camers that can edit in 360-degree. Plus, the software is stupid and easy to use. It's on sale right now on Amazon.

Ended up getting a new head and pipe. I wanted to see how this card did with all the goodies on it. Upgrading to a new carb soon. That will help for sure. Thanks for the head up on the gas. I think your right. Building vacuum in the tank I think... sorry for the late response. Right safe! 🔥

I did end up putting a filter on because of bad weather.

@@kennethlloydr.sentino934 I think long term it will be for sure!

If 10 is stock then yes, it would be 10 to 36. Hard to tell in the videos but the town was build on a hill hence the 36 sprocket. 😅

Finaly got one brother. Wasn't able to use it in this upcoming video but that is okay. I have heard 12.0 to12.5? Let me know your thoughts.

@xdjackie1398 so at this point in the build it was stock. I believe I had 3 base gaskets so I could get the correct piston squish. I had to remove the carburetor air filter. With the air filter on, I was struggling to get it over 33mph.

I'm going to take the head off soon and get some measurements. Ken and the boy stated that the head for the Avenger 85 is slightly bigger than an LD or YD 100 head. But I will not know till I see for myself.

Yes 40mph is not what these bikes and barring were made for. Really the barring inside the motos are not made for those Rpm either. Build Brake Fix explains all that really well in one of his videos. I really don't recommend going that fast. 😅😅

@@EdKennedy-ws8wu yep phantom 👻 will hit 50 out of the box 📦. There is a lot of power 🔋 in the phantom.

@@grendelsgarage9723 dealing with a ys100 built from ground up can't get it running

@EdKennedy-ws8wu dang!! Keep it at, brother!! Love this hobby, but sometimes I want to hit my head off the wall 🧱🙃. What do you think the issue is?