Avet JX Raptor Reel Service

Рет қаралды 27,709

9 жыл бұрын

Basic service of an Avet JX Raptor 6/3 reel. The entire operation takes about 12 minutes with simple tools and supplies. See my avatar for a photo of this reel after besting a jackpot 67# bluefin tuna using 60# test on the Royal Star (thanks Blake).

Пікірлер: 79

@chuckkokoska8496 4 жыл бұрын

Killer videos Mark! With all this stay at home stuff...you gave me the confidence to do these myself! Thanks Chuck

@CharkBaitUSA 5 жыл бұрын

Nicely done Mark, very helpful to a lot of folks.

@308at95630 6 жыл бұрын

Just so you know, that driver comes in a hex version too (can find on amazon). It's handy to have both for the bit selection. Thanks for the video - super helpful to service my new JX Raptor.

@svvamprat22 4 жыл бұрын

Oh boy I just found this gem. I just bought a used JX 6/3 raptor last year used it twice then shutdown. This is either going to be the greatest video ever or the worst.

@markmayo2853 2 жыл бұрын

Service it before any trip after a long rest.

@kiwiguy54321 8 жыл бұрын

Great video thanks Mark, really looking forward to handle removal video when you have time as I have a new t-bar handle to install on Jx raptor but can't work out how to do , happy fishing

@coopermorse3209 9 жыл бұрын

Thanks for the video, That was a huge help.

@johnperez35 9 жыл бұрын

Thanks, great video! Just what I needed. Possible for a complete breakdown video of the JX 6/3 Raptor in the near future?

@paulmorgan5425 7 жыл бұрын

Hey Mark, Thanks for your time and effort, you have saved me tons of both. I have several AVET single speeds and know how to break down the handle to replace the pinion bearing. These seam to need replacement occasionally. Can you make a video on how to do this on a LX 2 speed?

@markmayo2853 9 жыл бұрын

As soon as my helpful nephew wants to make another one, I will try a side plate service which removes the handle, gears and bearings.

@MrSupersushiking 8 жыл бұрын

You said that a year ago. Is it coming out anytime soon?

@markmayo2853 8 жыл бұрын

Joda Cokol I moved this year to a new home 150 miles from Long Beach. I am just now getting settled. You can expect one.

@karlobobiles2968 Жыл бұрын

Hello Mark, thanks for the video! It will help me service my own reels. Looking to purchase a Megapro, but do you recommend the manual screw driver or the ratcheting one?

@markmayo2853 Жыл бұрын

I use the stainless model that does not ratchet.

@patrickschmickrath625 6 жыл бұрын

Thanks Mark. Your Avet videos are greatly appreciated. Is there any chance you could do some on the Makaira SEa reels?? Thanks again, Patrick

@markmayo2853 Ай бұрын

No sorry

@billharper6726 9 жыл бұрын

Great video Mark. Just wondering if the magnets can be removed on the MC Cast to gain better freespool? Seems like all the Raptors from the SX to the JX come with the MC Cast which IMO does not freespool very well even on the lowest setting. I have an HX Raptor without it and it freespools very well.

@markmayo2853 8 жыл бұрын

I agree but just fish the reel as is. It performs on the ocean as you want and I get the bait out there.

@markmayo2853 Жыл бұрын

I don’t think the magnets can be removed

@2derekjeter2 4 жыл бұрын

have you ever worked on an accurate reel or valiant ,if so do you believe those may be better constructed like perhaps with beffier gears ? thank you in advance great video!

@markmayo2853 2 жыл бұрын

No. I stick to reels I have and know. Sorry

@Tony67032 9 жыл бұрын

thanks for such useful videos , one question i have does all raptors are basically the same as the jx, how you service it,, thank you again for taking the time to do the videos

@markmayo2853 9 жыл бұрын

Yes, all raptors are the same except you have to deal with the strap lugs on HX Raptors.

@Tony67032 9 жыл бұрын

wow thank you for the quick respond :)

@johnnycortez46 2 жыл бұрын

Will the small can of 3 and 1 oil work for these reels?? Awesome video by the way. Very helpful 👌

@markmayo2853 2 жыл бұрын

I don’t like that oil for salt water applications. Try Bluewater Tackle for GetSome Oil.

@johnnycortez46 2 жыл бұрын

@@markmayo2853 ok thx

@markmayo2853 Жыл бұрын

@markmayo2853 Ай бұрын

@curtisjeffries9812 4 жыл бұрын

I would like to add a power handle to my Raptor JX 6_3. is there anything I should be on the lookout for when changing out the speed housing and the actual arm itself?

@markmayo2853 2 жыл бұрын

Check my speed shifter video. Be careful

@friaspayan3500 9 жыл бұрын

Great video can you please do one on the avet sx reel would be helpful thanks

@markmayo2853 Ай бұрын

It’s there

@2derekjeter2 8 жыл бұрын

Mark , what does avet have that compares to the penn torque 40narrow lever drag , in line capacity and gear speed..Thanks!!

@markmayo2853 8 жыл бұрын

I am not an Avet insider I just buy them, service them and use them. I think the either the stock JX raptor or narrow HX raptor should be a match for your request. Save money and buy the Avet and easily service it yourself.

@markmayo2853 Ай бұрын

JX Raptor fishes 50-60 easily.

@joe1745ny 8 жыл бұрын

could u illustrate or describe how to change raptor reel handles as for a "power" upgrade?

@markmayo2853 8 жыл бұрын

I will show a handle removal soon.

@jjp4119 5 жыл бұрын

Hi there, My JX two speed is cranking freely on both directions. Lever is engaged and even locked but made no difference. Any advise will be appreciated. Thanks.

@markmayo2853 Жыл бұрын

Gear upside down

@markmayo2853 Ай бұрын

Drag gear is either upside down or you installed the dog upside down. Easy to fix. Check for dog action BEFORE you close up the reel and reattach the right side plate.

@sknowiteproductions Жыл бұрын

6:08 I noticed the gears popped out really easily. I feel like mine are jammed and I can’t remove them on Jx 6-3 mc raptor. Any suggestions. I did this service (reel is less than 2 years) plenty of oil/grease, just dirty. After service, high gear feel like it’s grinding on down stroke of handle when reeling. Any suggestions?

@markmayo2853 Жыл бұрын

Try cleaning the teeth inside with brake cleaner. Clean that stuff with an alcohol and grease again. Hopefully it will help

@markmayo2853 Ай бұрын

Some are tight, some not. Always grease the insertion hole to help get them out next time.

@josuemolina901 7 жыл бұрын

The drag washer, you said you greased it.. I read on a forum of some guys doing the same and some guys saying that's a no no, I am confused as why to grease them or why not to grease them. What is the benefit? Could you please explain?

@markmayo2853 2 жыл бұрын

Grease it as per my suggestions and skip the doubters. It works with every Avet I have.

@markmayo2853 Жыл бұрын

Grease it

@markmayo2853 Ай бұрын

Do it!

@2derekjeter2 Жыл бұрын

Heard the bearings go out on these reels

@markmayo2853 Жыл бұрын

I have ten+ year old reels with original bearings. I fish hard!!! People who don’t service their reels have issues. Service yours!!!

@markmayo2853 Ай бұрын

Only if you apply stupid drag pressure or don’t take care of them.

@luisramirez-yw3ri 8 жыл бұрын

hey does the raptor make noise when you shake it. could it be the mc because it's close to the spool

@markmayo2853 8 жыл бұрын

I just tried my two JX raptors and no noise. I leave Monday on a 10 day on the vagabond.

@luisramirez-yw3ri 8 жыл бұрын

+Mark Mayo could it be beville washers they look odd. but can't find schematics

@luisramirez-yw3ri 8 жыл бұрын

+Mark Mayo imagine this is the spool. l-----l it moves slightly left to right when I shake it makes like a little thump. have nice trip

@jesmineryckman3157 7 жыл бұрын

You do this after every trip?

@markmayo2853 7 жыл бұрын

Yes I do. I am sad to report that I only get to sea four times to six times a year. I do think that leaving salt water in any reel over time does it in. After my last 2 day I managed all three reels in 30 minutes including setup and cleanup. You get better each time. My reels look new inside and always perform as I expect them to do.

@markmayo2853 Жыл бұрын

Yes

@michaelscorzelli8830 3 жыл бұрын

You don't remove the handle and the main gears?

@markmayo2853 2 жыл бұрын

Only when the bearings are bad. Mine almost never go bad. I’ve had to with two reels in seven years. I use tons of drag too!

@markmayo2853 Ай бұрын

Not every time - not needed.

@chuckkokoska8496 4 жыл бұрын

Is there much difference when maintenance on an MC reel?

@markmayo2853 2 жыл бұрын

@markmayo2853 Жыл бұрын

No difference but G2 are newest and better

@markmayo2853 Ай бұрын

None

@rustyshackleford5466 5 жыл бұрын

Is this process the same for an mxl?

@mdees88 5 жыл бұрын

MXL raptor yes, regular MXL not exactly...

@markmayo2853 Жыл бұрын

Yes

@markmayo2853 Жыл бұрын

Yed

@johnsmith-xd9ej 4 жыл бұрын

does it have a Thrust Beaeing?

@markmayo2853 2 жыл бұрын

@markmayo2853 Жыл бұрын

@markmayo2853 Ай бұрын

@xrpayday5637 2 жыл бұрын

Any changes? Mine is a new reel

@markmayo2853 2 жыл бұрын

Not to my knowledge. I too have a brand new MXJ Raptor. Same

@markmayo2853 Жыл бұрын

Not much. Look at Raptor to see how to start. Rest is the same.

@naturalmystics-kd9vt Жыл бұрын

Avet reels are poorly made I buy one and a screw the handle fall out

@markmayo2853 Жыл бұрын

I have 12; my group has over 60. They are well made reels that always work if maintained properly. Sorry you don’t agree.

@markmayo2853 Жыл бұрын

BS. They are great