Aviation Tin Snips - Wiss vs Eastwood

Рет қаралды 32,854

12 жыл бұрын

Buy Eastwood 3 pc Snips Set Here: www.eastwood.com/3-piece-aviat...
Buy Eastwood 5 pc Snips Set Here: www.eastwood.com/5-piece-aviat...
The nonslip serrated jaw is made of tough molybdenum steel and holds material firmly while uniformly spreading the cutting force across the blade edge.
Spring action for fast, effortless feed.
Serrated blades for clean cuts
Handles made of high tensile strength alloy steel and designed to offer compound lever action for higher cutting force
Nonslip, textured grips and safety latch
Left, Right, and Straight Snips are designed to cut straight, complex patterns, circular shapes and acute angles.
Cuts up to 18 gauge galvanized steel
Spring-loaded
Dual-material cushion grips for comfort during repetitive use
Color-coded grips for quick identification
Buy Wiss Snips Here: www.eastwood.com/wiss-aviation...

Пікірлер: 16

@kool2023A 12 жыл бұрын

Thanks for all these tools. That's really great.. keep the momentum.

@martajajackson1836 8 жыл бұрын

Thank you for this video!

@markkrul3429 7 жыл бұрын

In 1953 body panels changed to 22 gauge steel. In the early 80's it went thinner than 22 gauge. 20 gauge would be for a box section of floor pan/frame.

@jamess3417 6 жыл бұрын

So Eastwood snips are $6 CAD?

@eastwoodco 12 жыл бұрын

A link to purchase the snips is below the video.

@shinigamisama5664 6 жыл бұрын

Hello. I'm a electromechanical student at Fidelitas University in Costa Rica. I'm taking Metallurgy class and I have a final project, which consist in explaining the process of creating any kind of hand tool or piece of metal, and choosing the proper steel. I've been searching a lot a couldn't find the exact alloy you guys use for blades. Can I have at least a hint? Do you use tool steel like M2 or do you use HSLA steel like a 4140 (chromoly steel)?

@EnnTomi1 3 жыл бұрын

thats probably secret for the company....or they spend money that bought from other company....the recipt...

@Vylkeer 9 жыл бұрын

Are these any good to cut anything like hard paper, thin wood, plastic, rubber, cables, wires and so on?

@wesleybeavers1930 8 жыл бұрын

never cut anything besides sheet metal with your snips.

@escaflowne33055 6 жыл бұрын

If anyone reads this in the future, please don't listen to that dumbass reply. The hardness of 60 to 62 will destroy all those things. Making sure you don't exceed the jaw capacity is the only issue and that is more to do with how it is built not that the cutting edges would fail.

@Coastwiser 5 жыл бұрын

@@wesleybeavers1930 I use mine this morning to cut hard shell lobster claws from my dinner last night here in Maine because the hard shell lobster claws wouldn't give way to a 3 Pound Hammer I can report that the snips worked perfectly and still do

@wesleybeavers1930 5 жыл бұрын

@@Coastwiser that makes sense, I should have specified about metal objects. Like electrical wire, wire, or rope. Stuff like that might botch the jaws or even worse, spring them. I cut pookie bucket lids with mine all the time.

@mavamQ 5 жыл бұрын

@@Coastwiser Well my wife and I were driving home when I read a sign, “Lobster Tale $10”. Heck I thought that was a very fair price so I stopped and paid. The guy took my money and started, “Once upon a time there was this Lobster....

@eastwoodco 10 жыл бұрын

www.eastwood.com