Avoid These 3 Common Mistakes When Lubricating Bearings

Рет қаралды 156,740

Күн бұрын

Lubrication of rolling element bearings is one of the most misunderstood and abused maintenance tasks in industry. How do you know when or how much grease a bearing needs? If over greasing or greasing on a time based schedule is your method of operations, you need to Hear More -- goo.gl/sJTo4m

Пікірлер: 58

@lowellwhite8810 10 ай бұрын

Thank you. This vid came up in my self-study of modern lubricants The evolution of lubricants has given us such superb materials to work with. Diagnostocs has given remarkable abilities to get just the right lubricants in right amounts in time. What i like most and what i thought revolutionary is how this points out and now makes a lie of the common wisdom that we should use more because oil/grease is cheap insurance. Now too much is only better way too little. Or do i misunderstand?

@paul-vg3fm 4 жыл бұрын

The information is very interesting ,although not pertanent to me. Thanks for the video.

@rustyghost3141 3 жыл бұрын

This guy sounds like that typical teacher that everyone sleeps on

@Ashoud_Anobetah 2 ай бұрын

You sound like a dunce

@blondprince9507 3 жыл бұрын

Thank you sir for this presentation , really appreciate that . A question , can we use this on helicopter bearing Best regards

@SDTHearMore 2 жыл бұрын

In general yes, feel free to send us an email if you have a specific question: info@sdtultrasound.com

@shengjingbo8725 6 жыл бұрын

Great

@leonidaratovski1403 9 ай бұрын

how you know what Decibel should make my bearings?

@SDTHearMore 6 ай бұрын

Every bearing is different, from size, materials used, processes, load, environment operated within. There is no one answer.

@boopathipathi 4 жыл бұрын

Y the grease colour changing in brand new pumps in packing condition one month old but not used pumps

@allansdt 4 жыл бұрын

moisture? Humidity?

@boopathipathi 4 жыл бұрын

Rust in bearing balls

@jackass72 2 жыл бұрын

@@boopathipathi Nothing worse than rusty balls.

@oby-1607 4 жыл бұрын

Grease my old excavator every day before starting the day. Still tight with very little play in joints. Greasing works.

@sarahelinburg8308 2 жыл бұрын

Too much grease and you will blow the bearings and cause more problems.

@danielyoder1462 2 жыл бұрын

The bearings on an excavator are also operated at low speeds. Also it’s bushings not bearings on an excavator boom which is a totally different application

@tommurphy4307 Жыл бұрын

@@sarahelinburg8308 nonsense- they aren't pressure-fed

@charlespatterson9138 3 жыл бұрын

Damn was looking for help with nearings not a strung iut advertisement

@9126975481 Жыл бұрын

what is this instrument

@SDTHearMore Жыл бұрын

Hi, the one featured in the video is the SDT270: sdtultrasound.com/products/sdt270/ To help you lubricating bearings right, we have also the LUBExpert: sdtultrasound.com/products/lubexpert/ and the LUBEChecker: sdtultrasound.com/products/checker-range/lubechecker/ Feel free to contact us if you need further info.

@KarolosAthens 3 жыл бұрын

NVH phenomenon .

@tommurphy4307 Жыл бұрын

more fish grease, please..

@KarolosAthens 3 жыл бұрын

NVH phenomenon, polyurea grease from japan!!!

@tommurphy4307 Жыл бұрын

fish grease

@Mike_Savin 3 жыл бұрын

So what is the best lubricant for bearings ??? ... Is it grease, white lithium, singer oil ?

@SDTHearMore 2 жыл бұрын

Well all depends on the working condition of your assets :)

@tommurphy4307 Жыл бұрын

I.e., what kind of bearing and what application?

@floweuphoria69420 Жыл бұрын

@@SDTHearMore I am wondering specifically for an evaporator fan inside a refrigerator it gets very very cold and the fan might produce some heat through its operation but there was rust on the shaft and bearing farthest away from the brushless part

@commenter5469 7 ай бұрын

He doesn’t know, and don’t care. This video is commercial for his ultrasound gizmo.

@oldgreg5799 3 жыл бұрын

Me, a skateboarder. Cool. Cool.

@jackass72 2 жыл бұрын

Fuck you and your skateboard too! Do you realize how many fidget spinners aren't being properly lubricated? Some people are so selfish!

@tommurphy4307 Жыл бұрын

somebody took back a comment about skaters?

@vladislavovich100 2 жыл бұрын

Just show how much lubrication needed in the bearing.

@SDTHearMore 2 жыл бұрын

It depends on the bearing condition, speed and level of friction.

@im-that-guy-pal 2 жыл бұрын

I mean yeah thats a high-tech tool but for the average mechanic.. is it necessary?

@SDTHearMore 2 жыл бұрын

Hi Jake ! The notion of necessary is all relative to your economic reality. Is it necessary to apply this approach to lubricate an engine that operates 10 hours per year and for which the criticality is low? Probably not not. Is it necessary or useful to do this on critical rolling bearings in a metallurgical production where the production stoppage amounts to several tens of thousands of €/$ per hour? It's up to you to answer. #hearmore

@900stx7 Жыл бұрын

No.

@richceglinski7543 2 жыл бұрын

I clicked off at 1:20, once I realized it's a 16 min infomercial. I grease my equipment every few hours. Grease is cheaper than parts.

@SDTHearMore 2 жыл бұрын

Sure but the main idea is not to lubricate bearings on a time-based schedule but on a condition-based schedule.

@danielyoder1462 2 жыл бұрын

“Grease is cheaper than parts” is almost exactly what they are saying. Proper maintenance is cheaper than parts and they are helping with proper maintenance

@tommurphy4307 Жыл бұрын

@@danielyoder1462 cheaper than parts AND labor

@AecioCientista Ай бұрын

Então a lubrificação de rolamentos a graxa é mais barata

@robertscaggs1346 5 ай бұрын

would not use the term "infant mortality" when describing premature bearing failure.

@SDTHearMore 4 ай бұрын

Hi Robert, it's a commonly used term in industry. We don't use it anymore, but this is an old video.

@josermtz 5 жыл бұрын

TL;DR?

@SuperAcerx 5 жыл бұрын

Mistake #1 - Lubricating based on TIME instead of CONDITION Mistake #2 - Over and Under Lubrication Mistake #3 - Using a “Listen-Only” Ultrasound Instrument was looking for that aswell

@SDTHearMore 5 жыл бұрын

Thanks fir these tips ! www.sdtultrasound.com/news/sdt-releases-leakreporter&highlight=WyJsZWFrIl0=

@erbenton07 11 ай бұрын

I suspect this instrument is several thousand dollars

@SDTHearMore 11 ай бұрын

Fell free to contact us to change your mind: info@sdtultrasound.com

@dukeljk2191 5 ай бұрын

Don't waste your money. We have one, stinks waste of money.

@jackass72 2 жыл бұрын

Act now. The bearing in your fidget spinner will thank you later and you will be rewarded with many years of trouble-free service. You've been warned!

@im-that-guy-pal 2 жыл бұрын

Instructions unclear. Pinky toe stuck in toaster now.