AWESOME DIY Les Paul Guitar from an Inexpensive Kit

Рет қаралды 77,694

Күн бұрын

Here are some of the highlights and key takeaways from my first guitar kit build ever. I went with StewMac because my research indicated that their kits were the best, and included the best instruction. I found the guitar kit to be of very good quality, and the instructions were clear, even for a beginner. The support that I got from StewMac was also superb.
In the video I also talk about the specialty guitar building tools that I bought and used on the build, and I'll also tell you about the major goof that I made and how you can avoid it. You'll get to hear my brother Peter Mayer (www.petermayer.net), professional musician, play the guitar at the end.
The products that I used on this build include:
Fret Hammer amzn.to/399gteZ
Fret file amzn.to/3orVslY
fret board sanding block amzn.to/2LfCpNx
Nut Files amzn.to/3oq8OPV
Transtint Dye amzn.to/2MKGo56
StewMac Les Paul Kit www.stewmac.com/kits-and-proj...
Soldering iron amzn.to/2Lz2mr4
Video equipment used:
Canon Rebel 7i DSLR amzn.to/3pKXxuV
Camera mounted mic: amzn.to/36CZZLl
Studio Mic: amzn.to/3epZIiR
Thanks for supporting this channel by using these links to buy your products.

Пікірлер: 174

@Libra1059 3 жыл бұрын

Excellent video! Looks and sounds great. Thanks for showing this!

@ToolMetrix 3 жыл бұрын

Thanks 🙏

@dalewoodring5887 2 жыл бұрын

Thank you for your excellent, thorough, but short video. You hit all the important points for anyone looking to diy a guitar kit. So many videos spend 45 minutes talking through what you covered well in 11 minutes. Great job!

@ToolMetrix 2 жыл бұрын

Thanks Dale. I really appreciate that feedback. It takes a lot of work and discipline to keep these tight so it makes me happy whenever someone notices. Cheers, Paul

@lroscinski5046 3 жыл бұрын

DUDE ! Its beautiful ! I just got my first kit ever, cant wait to get it finished and hear how it sounds... I'm finding that the little things you do really make it out to be a great piece in the end.. Ha ha ! Great video, thank you for all of the great information !

@ToolMetrix 3 жыл бұрын

Thanks for the feedback and best of luck with your build!

@stewmac 3 жыл бұрын

Nicely done! Congrats.

@ToolMetrix 3 жыл бұрын

Thanks for watching, and for the feedback. You guys make a great product, and offer outstanding tech support!

@ToolMetrix 3 жыл бұрын

Yeah, I definitely avoided kits in the $100 range. They are out there but the reviews are horrible. This kit is good quality with clear controls instructions and great tech support for new builders like me. This is a nice guitar and a great way to go if you want the experience of assembling a guitar. It’s probably not going to save you much money, especially on a first build.

@mvyper 2 жыл бұрын

You should try Harley Benton's. They are out for 100 bucks and very good for the money.

@dstrings4867 3 жыл бұрын

Hi..that kit build came out real nice so congrats on that. Sounds pretty sweet aswell. Awesome job. 👍

@ToolMetrix 3 жыл бұрын

Thanks 🙏! I appreciate your feedback. Cheers, Paul

@gordontarpley Жыл бұрын

I just purchased one of these. This vid was helpful to see what I've gotten myself into. Thanks for sharing!

@ToolMetrix Жыл бұрын

Great! Thank you for your feedback. Cheers

@americansamiam 3 жыл бұрын

Great Work. Thanks for doing the video and sharing with us. I recently began learning guitar and am interested in making my own. A kit seems like a good first start - like when I started working with wood.. Thanks also for sharing the goof.. We all have things we learn from and its refreshing to see on video...Love the honesty sir. Thank you.

@ToolMetrix 3 жыл бұрын

Thanks for the feedback, Sam! Yep, agree, great place to start. I’d kinda like to build another one from a kit. Maybe a different style. Fun project!

@stevo_hobbies 3 жыл бұрын

That finish came out amazing!

@ToolMetrix 3 жыл бұрын

Thanks 🙏

@kenjohnson6365 3 жыл бұрын

Nice job. I’ve built a couple of Appalachian Dulcimers from scratch and always wanted to try a guitar. I think a kit is a great way to start. Thanks for sharing.

@ToolMetrix 3 жыл бұрын

Thanks, Ken! I appreciate the feedback. Appalachian Dulcimers are Appalachian Dulcimers; those must have been rewarding builds. Cheers, Paul

@duanewilliams7676 2 жыл бұрын

You done a great job!!!loved the video,very professional

@ToolMetrix 2 жыл бұрын

Thanks Duane! 🙏

@loganstrickler2976 3 жыл бұрын

This man knows more about guitars, and doesn't even play them than I did when I was already playing for about a year

@ToolMetrix 3 жыл бұрын

Thanks Logan 🙏

@uria702 2 жыл бұрын

Fantastic job. You make it look so easy!

@ToolMetrix 2 жыл бұрын

Thanks for watching!

@kjguitarman 2 жыл бұрын

The dark brown stain with the dark red flame maple top looks better than most PRS guitars! Beautiful combo and craftsmanship! Looks professional all the way. The sample played at the end sounds like a true Les Paul. I’d like to hear the other toggle positions and clean vs distorted tone. Well done! 👏

@ToolMetrix 2 жыл бұрын

Thanks, KJ!

@spiderman0863 3 жыл бұрын

Great job and great presentation!

@ToolMetrix 3 жыл бұрын

Thank you kindly 🙏

@Fernos005 3 жыл бұрын

Good job for a first go round👍

@ToolMetrix 3 жыл бұрын

Thanks for watching, and for the feedback!

@loadi2865 2 жыл бұрын

Thanks for showing this! i really enjoyed your video....Nice job Sir.

@ToolMetrix 2 жыл бұрын

Thanks 🙏

@golflre7179 Жыл бұрын

Nice vid and good result. Beautiful

@ToolMetrix Жыл бұрын

Thanks 🙏

@jeffleister9793 2 жыл бұрын

What a beautiful guitar, you did an awesome job. I hope mine turns out like that.

@ToolMetrix 2 жыл бұрын

Thanks and good luck 👍

@positivevibration7145 2 жыл бұрын

Thank you sir,inspiring and motivating video ,Nice banjo style playing also ,bless you 👍🙏

@ToolMetrix 2 жыл бұрын

Thanks for watching and for the nice words. Cheers, Paul

@dag410 2 жыл бұрын

Looks great!

@ToolMetrix 2 жыл бұрын

Thanks DAG! 🙏

@gergemall 2 жыл бұрын

Great video . Great job

@ToolMetrix 2 жыл бұрын

Thanks Jon.

@FateGathersStudios Жыл бұрын

I just built a fender stratocaster, and love it... I'm thinking about this same kit next, never been a les paul fan because of the weight, but the sound is unmistakenable.

@ToolMetrix Жыл бұрын

Sounds like you will be building a nice collection!

@joellovejoy8876 4 ай бұрын

I put this guitar together as you have shown .Using a Bargain Musician kit turned out wonderfully thanks for the inspiration. Swapped out the tuners for Vintage Gibson tuners ( already had them.) For pickups I found Epiphone Pro Buckers online with wiring ( less than $60.00 online). Rivals my Custom and is better sounding than most of my Les Pauls for about $ 250.00 strings included.

@ToolMetrix 4 ай бұрын

Wow that’s great to hear! Congrats and thanks for sharing this. Cheers, Paul

@martybauer31 3 жыл бұрын

Great video, looks awesome, thanks for sharing! Would have admittedly loved to see your brother play some other styles of music and actually tell us what he thought about the build, how it felt, sounded, etc...

@ToolMetrix 3 жыл бұрын

Thanks, Marty! Great suggestion on some more coverage from Peter. He is primarily an acoustic guitar player (like, 99.9%), but he definitely likes this a lot.

@sandovalsilva5065 2 жыл бұрын

@@ToolMetrix por favor séria ótimo que coloca-se legenda s

@ChrisChiappini 2 жыл бұрын

You’re a really nice brother!

@ToolMetrix 2 жыл бұрын

Thanks Chris! 🙏

@StevenParente 2 жыл бұрын

Very informative!

@ToolMetrix 2 жыл бұрын

Thanks Steven!

@billieschwartz636 2 жыл бұрын

Your guitar build looks great and sounds great also really love the finish you did on its Great Job!!!🎸

@ToolMetrix 2 жыл бұрын

Thanks Billie! 🙏

@puddleduckist 2 жыл бұрын

Turned out 👍!!!

@ToolMetrix 2 жыл бұрын

Thanks Evil! 🙏

@benallmark9671 3 жыл бұрын

What an amazing job. I think I’d rather a kit guitar done by you then but a factory made one. I love the detail and care you put into it. Would you consider ?

@ToolMetrix 3 жыл бұрын

Hi Ben, thanks! I'm honored that you would say that. What I've heard is that, if you do a good job building one of these $250 kit guitars, that they are approximately comparable to a guitar that you would buy complete for $300. If you compared the finish and the wiring of mine to a factory made guitar, the factor made one would be considerable better. With the hours that I put into this one, it would cost enough to where you could buy a guitar that was WAY better, including better electronic components, for less money. I'd encourage you to try your hand at building one from a kit. It was a great learning experience for me. I really appreciate the kind words and the interest, Ben. Cheers, Paul

@mrwaffles1394 3 жыл бұрын

Beautiful job on the stain.

@ToolMetrix 3 жыл бұрын

Thanks! I was pleased with it. I was actually quite nervous about that aspect of the project but I found the process to be pretty forgiving.

@mrwaffles1394 3 жыл бұрын

@@ToolMetrix Yeah, working on a 335 kit myself. I’m having trouble evening out the undercoat. Doing blue over black... eventually.

@jimfromoh8944 3 жыл бұрын

@@mrwaffles1394 Check out Big D Guitars channel. He is a master at guitar top dyes. Have to be careful with laminated or veneer tops, easy to sand through them and glue spots can be a nightmare if the top is too thin.

@mrwaffles1394 3 жыл бұрын

@@jimfromoh8944 I have. That’s where I learned about the leather dye. Thanks for the tip though!

@maksnowinski5206 4 ай бұрын

Awesome guitar

@ToolMetrix 4 ай бұрын

Thanks 🙏

@markpell8979 Жыл бұрын

From a fellow woodworker, beautiful guitar and nice job! I love Les Paul style guitars and will probably build one from a kit someday as you did. I noticed you left off the truss rod cover. If you didn't receive one with the kit, they're cheap. Consider getting a blank and an extra to practice on, personalizing it with your name, business logo or something artistic using your Dremel tool and cutting through the black top laminate to just touch the white underneath. A nice way to add a unique finishing detail to your guitar.

@ToolMetrix Жыл бұрын

Great suggestion. Thank you Mark. Cheers

@jabrah1000 2 жыл бұрын

Thanks for the video. I did a Martin OM, made a few whoopes but learned a whole lot before getting a Rainsong. Say "hi" to Pete! John A

@ToolMetrix 2 жыл бұрын

Thanks John. Will do!

@fret2fret221 3 жыл бұрын

The finish alone is worth $350. That’s a gorgeous guitar. I play an Epiphone Les Paul. Great job.

@ToolMetrix 3 жыл бұрын

Thanks 🙏

@williamsporing1500 2 жыл бұрын

I’ve been looking to build one just to set up for slide playing. This may do it

@ToolMetrix 2 жыл бұрын

Sounds like a good plan. Let me know what you think.

@IIIDontLie2MeIII Ай бұрын

These are still not for the inexperienced....nice vid...

@ToolMetrix Ай бұрын

Thanks for watching. The woodworking is easy, but the electronics and finishing aspects can be a bit intimidating, depending on your experience level.

@tjforgey7854 3 жыл бұрын

I have good luck with the Muslady kits,cheap hardware,but it can upgrade.just be very careful,the veneer tops are very easy to sand through.i have now built the LP,the Telecaster,and the strat.learned a lot

@ToolMetrix 3 жыл бұрын

Great information. Thanks for sharing, TJ.

@richardfinney3179 2 жыл бұрын

The best glue for instraments is Weldwood powered glue it has formaldehyde in it and it's stronger then the wood it self and it's very hard gives a great resonance through the whole instrament other glues are not as hard ,quality instraments are built with Weldwood glue, it comes in a small plastic bucket mix it with very warm water mix it to a tooth paste consistency peace bros n sisters

@ToolMetrix 2 жыл бұрын

Good to know. Thanks 🙏

@user-ne9ot6hu8o 5 ай бұрын

Great looking guitar! How long did you let the top coat dry or cure before assembling everything. I'm building a guitar right now and planning on clear coating the guitar to get a high gloss.

@ToolMetrix 5 ай бұрын

Thank you. Sorry, it's been a while and I don't remember exactly, but I don't recall waiting a super long time.

@alexkenyon7472 3 ай бұрын

Beautiful guitar! I'm looking into doing a similar build, and have a few questions about the finish you used. First, the wipe on poly- is it clear or warm, and satin or gloss? does the sheen matter for the wipe on layer? Secondly, for the spray, is it a polyurethane or lacquer, and is it clear or warm finish? I haven't done much of these types of finishes before. Thanks for any info you can give, and for creating this great video!

@ToolMetrix 3 ай бұрын

Thanks 🙏. As far as finishing, I used polyurethane and you can find clear (usually water based) or amber (usually oil based), and satin or gloss in both options. Lacquer is probably a good option for this project as well (perhaps even better) but I don’t have experience with it so I can’t really advise.

@GUITARKITWORLD 2 жыл бұрын

That's a great build, Paul! I'm a big fan of the Les Paul my self. Anyway, would love to send you one of our kits to review.. I hope you see this comment and comment back 😊 Cheers!

@ToolMetrix 2 жыл бұрын

Let’s talk…

@vadimf8301 3 жыл бұрын

stewmac advertising lp kit has a maple top and flame veneer. but you tell that is just a veneer. i glad i saw your video.

@ToolMetrix 3 жыл бұрын

Hi Vadim, yeah, it’s definitely good to know. The veneer isn’t a problem as long as you’re careful with your sanding. The body is actually made of mahogany which is a great wood for this. A solid piece of guitar-quality flame maple, machined with LP pattern, would probably cost more than this whole kit. Just guessing.

@justaburgscousin 3 жыл бұрын

@@ToolMetrix yeah actually Gibson les Paul’s with a full flame maple top go for $3000-infinity

@phayzyre1052 Жыл бұрын

Nice build, and thanks for posting! I’m contemplating building my own Gibson Les Paul (even going as far as putting a Gibson logo on the headstock!) For two reasons: 1. I cannot afford to pay what Gibson is asking for a Les Paul. 2. Given Gibson‘s shoddy quality in the last 20 or so years I want one that’s built right! For the price of a real Gibson Les Paul the way I figure is with these premade kits I could probably build around five of my own. To hell with Gibson!

@ToolMetrix Жыл бұрын

Thanks for watching.

@steelmike1965 2 жыл бұрын

I bought the same kit. I don't play, i collect. Thought it would be fun to put one together and learn something in the process. Yours looks great. Are you going to learn to play now?

@ToolMetrix 2 жыл бұрын

Hi Michael, thanks 🙏. No, no plans for playing. Tried when I was younger and don’t have the gene.

@fsca72 2 жыл бұрын

Would be nice if the kits were customizable in a sense to where you can elect to leave out certain hardware

@ToolMetrix 2 жыл бұрын

Yep I agree. That’s be cool.

@nashvegas9180 3 жыл бұрын

Thanks for making this video. I did have a question. I saw the sanding block appeared to be labeled 9.5 radius. Les Paul I believe is a 12 in radius fretboard. Is stewmacs fretboard a 9.5 radius? Again thanks for the video I have been looking at one of these kits.

@ToolMetrix 3 жыл бұрын

Hi Nash, I don't remember. I thought that I got the one that was referenced in the manual. It's possible that I got the wrong one but it seemed to match the guitar.

@nashvegas9180 3 жыл бұрын

@@ToolMetrix If it works and you are happy rock on. I am building my second tele at the moment. I have almost as much fun building as I do playing. Mahalo

@addman34555 3 жыл бұрын

Is poly able to go directly onto binding? Or do ykou have to sand a bit of the binding before it applies?

@ToolMetrix 3 жыл бұрын

I sanded it first. Not sure if it’s necessary to do so.

@JackbenchWoodworking 3 жыл бұрын

Dark red, was that their Red Mahogany dye?

@ToolMetrix 3 жыл бұрын

Yep, that's exactly the one!

@in2rock275 3 жыл бұрын

Need to hear some Zep or Dio through this axe.

@ToolMetrix 3 жыл бұрын

Thanks for the request, In2rock. I’ll pass it along to brother Peter to see what he can do. Cheers, Paul

@lektrikbass 3 жыл бұрын

Good video but what's with the first fret capo? Did the nut files malfunction?

@ToolMetrix 3 жыл бұрын

Sorry; I'm not sure what you mean. The nut files hadn't actually been used yet when the video was made, so it wasn't that.

@IfUfindthisURlost 2 жыл бұрын

Might be one of those guitarists who tune down a half-step, then capo at thefirst fret to bring it up to standard tuning????

@holdemNE1 3 жыл бұрын

And I thought I was the only one that even considered making a guitar without actually playing one.

@ToolMetrix 3 жыл бұрын

Hi Big Mike, thanks for watching. A guitar is such a different, interesting project, full of learning opportunities.

@robertrau2211 3 жыл бұрын

Have you started building one from scratch yet? How does that experience compare to the kit assembly?

@ToolMetrix 3 жыл бұрын

No I haven’t. I have a long list of stuff ahead of that, unfortunately.

@mathewnaami9063 Жыл бұрын

Sorry for the very basic question, but why wouldn't you want to stain the body before putting the neck on? i would assume that there would be some too tight to fit areas that could lead to a few missed spots

@ToolMetrix Жыл бұрын

The main reason that I did it that way is because I didn’t give it enough thought and didn’t bother reading the instructions. That’s probably a better approach. 😀

@nebworth3688 2 жыл бұрын

Would you be able to dye the binding as well?

@ToolMetrix 2 жыл бұрын

I don’t think so.

@blackbearbear9313 2 жыл бұрын

Not bad for your first time nice guitar the les paul custom made paul lol

@ToolMetrix 2 жыл бұрын

Thanks 🙏

@charliegrant1205 Жыл бұрын

what was the tool you used when adjusting the truss rod at 3:10? Thanks!

@ToolMetrix Жыл бұрын

Allen wrench

@charliegrant1205 Жыл бұрын

@@ToolMetrix lol sorry I meant the ruler/level device. Thanks!

@ToolMetrix Жыл бұрын

That was just a metal ruler. Office supply type of thing.

@adamsantos5649 9 ай бұрын

What color stain did you use on the bottom?

@ToolMetrix 9 ай бұрын

I didn’t us any stain on the bottom. It’s mahogany and I just left it natural.

@Fernos005 3 жыл бұрын

What Kind of soldering iron is that? Thanks

@ToolMetrix 3 жыл бұрын

Ha! I'm sure that you are referring to the first one that I showed, and not the one that I used when I re-did the wiring. That thing is a beast. I'm not sure what it is intended to be used for, but I don't think that guitar electronics is one of them. The good part about using that thing is that I got to do all the wiring twice, so I feel like this is really my first AND my second guitar, for the price of only one. :)

@williamcrichton6689 3 жыл бұрын

What is Peter's opinion of the sound of the guitar?

@ToolMetrix 3 жыл бұрын

Hi William, he likes the sound a lot. He believes it's a good quality instrument. That said, he's primarily an acoustic guitar player, so he hasn't been spoiled by high end electric guitars. It would be much harder to impress him with a $250 acoustic guitar. :)

@ajbrown Ай бұрын

Are you sure the fingerboard radius is 9.5"? I measured the same kit at 16".

@ToolMetrix Ай бұрын

Sorry I don’t recall where I saw that information and I’m not positive.

@jordimateubartroli951 Ай бұрын

Any problem dyeing the top? I've got the kit but instructions recommend not to dyeing directly.

@ToolMetrix Ай бұрын

Hmmmm…interesting. Well, nothing bad happened but I probably didn’t read the instructions closely enough. So they suggest a couple coats of sealer first? If so, you’re probably better off following the instructions than following me. 😃

@jordimateubartroli951 Ай бұрын

@@ToolMetrix Well, they suggest a pair of coats of sealer and after that finishing with a colored transparent lacquer.

@ToolMetrix Ай бұрын

Good to know. Thanks 🙏

@13skies 2 жыл бұрын

Your brother plays great. I was wanting to hear the guitar rock out. Generally this is a rock guitar. just saying. Nice build.

@ToolMetrix 2 жыл бұрын

Thanks Dana!

@BryanMontford 2 жыл бұрын

Did you use grain filler on this?

@ToolMetrix 2 жыл бұрын

Hi Brian, I didn’t but it would be a good idea to do so.

@jakeritchie3805 2 жыл бұрын

I know I'm late to the party but, what is the quality of the hardware?

@ToolMetrix 2 жыл бұрын

I felt like it was quite good for the price point.

@wadebergeron7211 3 жыл бұрын

I built not one but two guitar kits. One prewired and the other not. Both don't make a sound and I thought for 100% surety that I did the wiring correct from the diagram. My guess is that they are grounding out. Anyone out there know of some good video's or help on wiring a LP guitar and troubleshooting? I did reach out to Guitar Kit World but they only sent me another diagram...which I already had? I could use some help,,,

@ToolMetrix 3 жыл бұрын

Hi Wade, That's a bummer. In my case I had cooked some electronics with my soldering iron that was too hot. It's hard to say, but my hunch is like yours; probably a grounding problem. I bet you could find a guitar tech who could look at it and give you some advice for cheap or free. Hope you can get it sorted out.

@JamesFord-mo7vg Жыл бұрын

What's it sound like playing Metal

@ToolMetrix Жыл бұрын

Awesome!

@blackbirdpie217 2 жыл бұрын

Unfortunately the top center glue line is visible. Looks splotchy. I wonder why they glue it up with a visible glue like that.

@ToolMetrix 2 жыл бұрын

Yep it’s kinda distracting

@gregsherrelkenoslots6688 3 жыл бұрын

How much is the kit?

@ToolMetrix 3 жыл бұрын

Currently $210. I think I paid $225. www.stewmac.com/kits-and-projects/instrument-kits/electric-guitar-kits/lp-style-electric-guitar-kits.html

@TheDynamiteGuy 2 жыл бұрын

Uh, excuse me but that is Flame Maple not Curly!

@ToolMetrix 2 жыл бұрын

I had it tested down at the wood science lab and they confirmed that it is curly and definitely not flame. They did warn me that some internet experts would mistake it as flame. 🤣

@ralphdanysh7760 2 жыл бұрын

How much do you think your DIY guitar is worth?

@ToolMetrix 2 жыл бұрын

Not sure but probably not much more than the kit. I don’t think there’s a business in assembling these

@dananthony6258 6 ай бұрын

Peters playing fine but the tone sounds not so good. Maybe it’s the amp. Guitar looks great though.

@ToolMetrix 6 ай бұрын

Thanks for your feedback. Cheers, Paul

@harleymike55 9 ай бұрын

do not see curly maple

@ToolMetrix 9 ай бұрын

It’s the red part.

@harleymike55 9 ай бұрын

not mustache,open book.

@ToolMetrix 9 ай бұрын

Thank you for clarifying

@nychold Жыл бұрын

You goofed again. Always tin the tip of your soldering iron (coat it in solder). This keeps it from oxidizing and allow the tip to heat up much more quickly, plus it keeps oxidized metal from mixing into the solder when working, giving you cold solder joints.

@ToolMetrix Жыл бұрын

Thanks for sharing

@twoshedsjackson6478 3 жыл бұрын

Buy a Chinese kit from AliExpress, they're cheaper and the body is the right shape.

@ToolMetrix 3 жыл бұрын

Hi Frogmella, Thanks for your suggestion! I had a great experience with this kit, and in working with the customer service team at StewMac. I would definitely buy from them again, but others might want to try Ali.

@busabrye Жыл бұрын

That’s not curly maple and headstock shape is known as open book

@ToolMetrix Жыл бұрын

Thanks for watching and sharing your input. SM calls the veneer layer "Highly Flamed Maple" which is just a different name for the curly maple. Do you think it is actually something else? Or do you just refer to call it flame maple?

@garybuchanan6062 2 жыл бұрын

Sounds like Stewmac is selling kits that require you to buy a bunch of their tools. Hmmmm...

@ToolMetrix 2 жыл бұрын

You do need a modest set of tools but I didn’t have to buy any of them from StewMac.

@ToolMetrix 2 жыл бұрын

You do need a modest set of tools but I didn’t have to buy any of them from stew Mac.

@olmanrock5381 2 жыл бұрын

Why would you want to build an instrument you don’t play?

@ToolMetrix 2 жыл бұрын

Because they are a beautiful, interesting project. There are lots of guitar makers who don’t play.

@jessehoward6160 19 сағат бұрын

Those ARE NOT nut files those are welding tip cleaners get a good set of real files the cleaners are junk!

@ToolMetrix 11 сағат бұрын

Thanks for letting me know!

@booboo759 2 ай бұрын

what did the total cost arrive in at . You did an excellent job!

@ToolMetrix 2 ай бұрын

Sorry, I don't recall. It seemed like a great value at the time, though. The products that I used are listed in the video description. Thanks for watching!