Axe Restoration [Satin Axe Head With Walnut Handle]

  Рет қаралды 245,136

Forgotten Shine Restoration

Forgotten Shine Restoration

6 ай бұрын

Remove rust with cola? That's supposed to work? In this restoration of this extremely rusty old axe I will try... But of course I will also restore the complete axe, that means I will harden, quench in oil and water, file, grind, polish, cut with the band saw and saws and more. It will definitely be hot because it burns, but also very cold when you quench it.
▶ What did I do ?! ◀
I remove the coarse rust with a wire brush, then soak the extremely rusty axe head in cola and try to remove the remaining rust. I work on the contour with a belt grinder, an angle grinder and files. The axe head is then heated to 800°C/1472°F and quenched in 80°C/176°F oil. I then sanded the surface with sandpaper up to a grain size of 800. I made a new handle from walnut wood as the old one was no longer available. Now just rub the handle with linseed oil and hammer in the old wedges, and the new old axe is finished.
▶ Good to know ◀
I used the following tools: Wire brush, cordless screwdriver, drill, Bunsen burner, pin punch, hammer, brush, file, angle grinder, cut-off wheel, belt sander, hardening oven, oil, immersion heater, forging pliers, thermometer, oven, water, spatula, orbital sander, sanding fleece, polishing block, polishing paste, adhesive tape, pencil, knife, tweezers, band saw, calipers, sandpaper, saw, whetstone, linseed oil varnish
▶ Special thanks to my channel members! ◀
⭐Fred Chipps
▶ Do you want to support me? ◀
Would you like to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
www.paypal.com/donate?hosted_...
or use the following affiliate links:
Material for work:
Metabo bench grinder amzn.to/46rrkxL
Metabo cordless screwdriver BS 18 LTX-3 BL amzn.to/43833JV
Metabo bit set amzn.to/3pzwV4n
File set Gedore amzn.to/3NWmXU1
Sandpaper file amzn.to/3PBNo2D
Forging pliers amzn.to/3OGhG1T
Polishing paste amzn.to/3DYfHRA
Rust Remover Spray: amzn.to/48r91te
Immersion heater: amzn.to/3EOKrVE
Wire brush: amzn.to/3u1L6RC
Thermometer: amzn.to/40nAf0k
Equipment:
Camera Sony AX-53 amzn.to/3XHqI2J
Ring light amzn.to/3rhgj1Q
Microphone Rode amzn.to/44vlFF1
DJI Gimbal Camera amzn.to/3O1YjkJ
Affiliate links don't cost you anything, I just get a small share from the seller, you have no disadvantage from it.
▶ Did you like it? ◀
Did you like the video?
Then like, subscribe and share it, please!
Thanks a lot!

Пікірлер: 216
@beercatphil
@beercatphil 6 ай бұрын
Love that you saved the wedges. Makes the restoration seem more heartfelt. Great job as always!
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you very much! ❤🐢
@iamslayXing
@iamslayXing 6 ай бұрын
Is it a coincidence that this morning I was laying in bed and thought to myself “hmm. I wonder when he’s gonna post again” Well I guess I know now. -edit- just came from my brothers account, can’t believe this is the current top comment ❤
@piperatthegatesofdawn
@piperatthegatesofdawn 6 ай бұрын
Uh huh
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
No, that can't be a coincidence ❤🐢
@AlMeans
@AlMeans 3 ай бұрын
Beautiful job! The entire video was excellent. I especially liked the sanding progression on the axe head, interesting to see the differences between the grits.
@carlcasey4177
@carlcasey4177 2 ай бұрын
Bro what a coincidence
@karl-heinzbuchner8032
@karl-heinzbuchner8032 Ай бұрын
Gute Arbei
@Th3_Edit0r
@Th3_Edit0r 6 ай бұрын
I always love seeing videos like this. Just so relaxing.
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Nice to read... 🐢
@markflick1641
@markflick1641 3 ай бұрын
Nice work . The pitting gives it nice character
@larissanunes6913
@larissanunes6913 6 ай бұрын
Thank you for the videos. They help me sleep! Greetings from Brazil 🇧🇷
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
That makes me very happy! Everyone uses my videos in a different way! ❤🐢
@magnus0017
@magnus0017 6 ай бұрын
Love to see you trying out new things with your editing and videography, while the restorations are always a treat. We're getting closer to the definitely still secret blue turtle reveal, too, aren't we? 🎉😊
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Many thanks for the praise! Yes, at some point the turtles have to speak out...🐢
@-c3202
@-c3202 6 ай бұрын
Awww, I enjoyed getting to see turtle's real face. She looks so sweet 🐢
@bte52
@bte52 4 ай бұрын
Amazing craftsmanship. Thank you.
@ForgottenShineRestoration
@ForgottenShineRestoration 4 ай бұрын
Thank you, too! 🐢
@ToolsandTime
@ToolsandTime 6 ай бұрын
Well done! I like how it came out and the close-up camera work was bonus.
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thanks a lot! 🐢
@Rlphlx
@Rlphlx 6 ай бұрын
Beautiful craftmanship! The axe result was amazing and watching the video was delightful. Thank KZfaq for postín.
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you very much for your great feedback! 🐢
@morrinsville23
@morrinsville23 6 ай бұрын
Great video! Love the sanding grit comparison shot! And good to see turtle helping!
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Great to read that you like the shot so much, thanks for the feedback! Of course turtle always helps me out! 🐢
@morrinsville23
@morrinsville23 6 ай бұрын
@@ForgottenShineRestoration Turtle is awesome! So many great expressions
@robertheinrichvonseyfenste267
@robertheinrichvonseyfenste267 Ай бұрын
beautiful result... thnx for sharing...
@brittabecerra9371
@brittabecerra9371 6 ай бұрын
Super job !!!!.
@RestorationVideo
@RestorationVideo 6 ай бұрын
It looks great and you did a great job I really appreciate your talent and ingenuity! I find it more expensive to restore electricity than to buy a new one. Just like I ordered scrap to sell to them, I went to the market to buy 10 new axes to use quickly🤪🤪🤪🤪
@aero_264
@aero_264 6 ай бұрын
Its scary that coke and rust remover have one of the same ingredients
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
😅😅🤔🐢
@ailtonbezerra4513
@ailtonbezerra4513 2 ай бұрын
Parabéns vc é um ótimo profissional!!!!
@ForgottenShineRestoration
@ForgottenShineRestoration Ай бұрын
Obrigado! 🐢
@Restoration_land
@Restoration_land 6 ай бұрын
Great job 🎉 well done ❤
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you very much! 🐢
@MSJONESBLOUNT
@MSJONESBLOUNT 6 ай бұрын
Good video
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you! 🐢
@MSJONESBLOUNT
@MSJONESBLOUNT 6 ай бұрын
@@ForgottenShineRestoration np
@MuscoviteDN
@MuscoviteDN 6 ай бұрын
Finally 🎉 Perfect work!]
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you very much! 🐢
@chupacabra2358
@chupacabra2358 6 ай бұрын
I'm going to admit when I saw you wash it in coca-cola I was dubious but when I saw the quenching and how well done it was my faith was restored
@--Superman--
@--Superman-- 6 ай бұрын
Es un pasada verte trabajar , felicidades un trabajo perfecto 👍
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Muchas gracias por su magnífico comentario.🐢
@neraklrllessur8844
@neraklrllessur8844 6 ай бұрын
Gorgeous!
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you!🐢
@braydenthompson8240
@braydenthompson8240 2 ай бұрын
Hello from Jamaica 🇯🇲🇯🇲🇯🇲❤❤❤
@ForgottenShineRestoration
@ForgottenShineRestoration 2 ай бұрын
Hello from Germany 🐢
@giotto4321
@giotto4321 Ай бұрын
Excellent video, thanks!
@ForgottenShineRestoration
@ForgottenShineRestoration 14 күн бұрын
Thanks! 🐢
@andersanders4470
@andersanders4470 23 күн бұрын
BRAVO
@garyjones2582
@garyjones2582 6 ай бұрын
FSR its good to see you in the lab again... Very nice work, it turned out beautiful... Take care my friend...
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you very much for your praise! Take care of yourself too! 🐢
@RestoredChannel
@RestoredChannel 6 ай бұрын
Wow well done and love the editing!
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you! 🤗🐢
@mayosun6638
@mayosun6638 6 ай бұрын
i dont know why, but these types of video help me sleep 😭 maybe its just the sound like almost background noise, but i genuinely cannot sleep without these videos playing so thank you LOL
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
That's great, isn't it? 🤩🐢
@MASI_forging
@MASI_forging 6 ай бұрын
Super great restoration. 👍👍
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you! 🐢
@kelcesar
@kelcesar 6 ай бұрын
The closeup camera looks great!
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thanks! 🐢
@user-nc6vn3bt3v
@user-nc6vn3bt3v 2 ай бұрын
Хорошая работа!
@ForgottenShineRestoration
@ForgottenShineRestoration Ай бұрын
Большое спасибо! 🐢
@Chalkeater98
@Chalkeater98 6 ай бұрын
This is what cleaning my room is like. A lot of dust, scraping, and Coca Cola everywhere
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
🤣🤣🤣 funny 🐢
@lucieleimbach
@lucieleimbach 5 ай бұрын
Love your work. You have always shown the pink turtle. I like the blue one too. I’m sure they are good assistants.
@ForgottenShineRestoration
@ForgottenShineRestoration 5 ай бұрын
Thank you! Yes, these are really good helpers 😎🐢
@user-maxmud
@user-maxmud 6 ай бұрын
Прекрасная работа 💪💪💪💪
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Большое спасибо! 🐢
@vinceianni4026
@vinceianni4026 6 ай бұрын
Hello mister beautiful restoration beautifully restored good job well done
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Hello mister super great beautiful Commentator 🐢
@Soeren.82
@Soeren.82 6 ай бұрын
Richtig coole neue Perspektiven 🎉 Die Axt sieht am Ende richtig Hammer aus. So eine hätte ich gern ❤
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Vielen lieben Dank für das tolle Feedback! 🐢
@joegiotta7580
@joegiotta7580 3 ай бұрын
What a beautiful way to illustrate how not to hang an axe head.
@oneshotme
@oneshotme 6 ай бұрын
It looks great and you did a wonderful job restoring it as well!!!! I enjoyed your video so I gave it a Thumbs Up for the support of your channel
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you very much! I'm really looking forward to reading from you again! 🐢
@user-ox5bj9sk6o
@user-ox5bj9sk6o 6 ай бұрын
Отличный ролик! Но стоит чаще прибегать к помощи угловой шлифовальной машинки.
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
ok. Где, например? 😅🐢
@eiunelun1742
@eiunelun1742 2 ай бұрын
喜欢
@Cubicle11
@Cubicle11 6 ай бұрын
Give this Man An Oscar!
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
🤭🥰🐢
@charlesdarienzo6686
@charlesdarienzo6686 6 ай бұрын
Good job
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thanks! 🐢
@penawar_axe
@penawar_axe 6 ай бұрын
Nice 👍👍👍
@JorgePetraglia2009
@JorgePetraglia2009 6 ай бұрын
Amazing work as always.I was expecting some welding done on the pitting, although was not really necessary. You are good amigo,please keep these videos coming. Greetings from Toronto.
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you for the great feedback! 🐢
@carlosfelipevillarraga2862
@carlosfelipevillarraga2862 6 ай бұрын
Hace rato no me pasaba por aquí, estoy feliz de haberlo hecho 🐢🐢🐢
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Bienvenido, me alegro de volver a verte. 🐢
@pi620
@pi620 6 ай бұрын
I’m interested in getting into metal restoration a little. How do you protect the surface, especially the pits from getting surface rust? And what kind of belt sander is that, looks quite unique? Thanks.
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
After restoring I always spray the parts with oil, but the polished surface alone makes the metal very difficult to rust... 🐢
@carrestore
@carrestore 6 ай бұрын
Great video
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you! 🐢
@user-ku2oe4mg8b
@user-ku2oe4mg8b 6 ай бұрын
Ефект від Кока-Коли просто неймовірний !!
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
🤪😅🐢
@jailsondasilva223
@jailsondasilva223 6 ай бұрын
Restaurado machado 😉
@rutikuiwa7133
@rutikuiwa7133 6 ай бұрын
Excellent job
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you very much! 🐢
@andrzejporeda7281
@andrzejporeda7281 6 ай бұрын
Przepięknie jest to odrestaurowane ta bardzo mocno stara siekiera pozdrowienia serdeczne pozdrowiam serdecznie 👍👍👍👍👍👍👍👍
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Dziękuję bardzo! 🐢
@lindawallace6750
@lindawallace6750 6 ай бұрын
B E A U T I F U L 😊! ! ! !
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
T H A N K S ! ! ! 🐢
@TheJcochrane
@TheJcochrane 6 ай бұрын
Great job buddy but electrólisis is much better Say hello from Venezuela 🇻🇪👏👍🏻🤘
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
That's right! Many greetings to Venezuela 🐢
@zou6492
@zou6492 6 ай бұрын
Beatiful 👍🪓 restoration Congratulations 👏 Greetings from Belgium 😉🇧🇪👋🐢
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thanks a lot! 🐢
@rtisom
@rtisom 6 ай бұрын
Soooooo beautiful
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you! 🐢
@TapscottJ
@TapscottJ 6 ай бұрын
Amazing job, glad you’re having fun with it too! Curious if the soda really did anything?
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
No, the cola didn't help at all. Better to use conventional rust remover! 🐢
@matthewday7565
@matthewday7565 6 ай бұрын
@@ForgottenShineRestoration Or electrolysis ... maybe with cola?
@carlosfelipevillarraga2862
@carlosfelipevillarraga2862 6 ай бұрын
Me quedé con las ganas de que partiera en poco de leña con el hacha :(
@MrGold-dv2jh
@MrGold-dv2jh 6 ай бұрын
"Im using coke to remove the rust" Axe came out of the exactly like it was when he put it in
@pascalsurlaroute
@pascalsurlaroute 6 ай бұрын
12:43 Turtoise: Errr.. Buddy, I think we have a problem here... Buddy: Well, we just won't show the top of the axe any more so nobody will ever see the frigging mess I made with these damn wedges.
@bird_b0nezz
@bird_b0nezz 6 ай бұрын
“It’s not necessary but it’s fun” Well no, that makes it necessary then, maybe not necessary to the restoration, but having fun and enjoying yourself is most definitely necessary
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you! This is really great feedback! ❤🐢
@juancarlosdume7754
@juancarlosdume7754 6 ай бұрын
1ro en comentar❤
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
¡Felicidades! 😎❤🐢
@jlindskog5141
@jlindskog5141 6 ай бұрын
Tolle Arbeit wie immer! Jetzt ab in den Wald zum Holzhacken 😂🐢
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Vielen Dank! Zum Glück bin ich schon "winterfest" und brauche kein Holz mehr hacken... 😅🐢
@kaosactual1
@kaosactual1 3 ай бұрын
So what was the flaking after the oven
@lisacox8109
@lisacox8109 6 ай бұрын
I wish I could do that
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Why not? 🐢
@lucieleimbach
@lucieleimbach 6 ай бұрын
Nice to see Turtle. Who is his blue friend who was shown in another video? Please keep posting. I have missed your videos. 🐢
@Gaurav_._._
@Gaurav_._._ 6 ай бұрын
Bro have more weapons than Avengers 😂
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
🤣🤣🐢
@genadyromanov7934
@genadyromanov7934 Ай бұрын
Шутка с колой понравилась.
@janainafernanda32
@janainafernanda32 6 ай бұрын
Que delícia um vídeo novo seu. O melhor🤩🇧🇷🇧🇷🇧🇷
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
É bom voltar a ver-vos aqui! e ainda mais bom que gostem! Com os melhores cumprimentos 🐢
@ice15464
@ice15464 6 ай бұрын
awesome
@ice15464
@ice15464 6 ай бұрын
does not look like the cola worked lol
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
true! 🤣🐢
@user-brobdingneg
@user-brobdingneg 6 ай бұрын
Черепашка ваша смотрю вовсю помогает в хозяйстве! Где такие помощницы продаются? 😊 Парочку бы купил! Ну а вообще топор получился очень хороший! А эти язвы ржавчины придают некоторую брутальность. Как будто это топор достался от деда 🤔 У меня кстати имеется топор, что сделал на заводе мой дедушка ещё в старые добрые 90е. Он чисто из металла. Хорошего металла. 20 лет пролежал в сыром погребе. И за это время лишь немного поржавел. Сталь топора весьма качественная была 😊 Благодарю за работу, Мастер! 👏👏👏🙏
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Большое спасибо! Да, я полагаю, что все зависит от производителя, какую сталь он использует. Я также придерживаюсь мнения, что качество продолжает снижаться, поэтому постоянно приходится жевать что-то новое... 🐢
@josemanuelgalicia1900
@josemanuelgalicia1900 2 ай бұрын
Exceso de medios para un rescate fácil. Quedó bien para lucimiento y exposición pero no para trabajo. Para trabajar con el hacha y tener un buen control de la herramienta durante el corte necesitaba un mango un poco más largo para su peso y un mango recto y más plano para indexar mejor. Con un mango redondo es fácil perder la orientación en el corte o el labrado. Tampoco entiendo para que se templa otra vez si solo se le ha sacado el óxido mediante un lijado. Parafinalizar, no hemos visto que grado de afilado se le hizo y si corta. No quería ver la típica tontería de cortsr una hoja de papel si no como cortaba madera. Pero bueno, como vídeo de entretenimiento está muy bien grabado. La utilidad es más discutible.
@BELLDANDYHOLYBELL
@BELLDANDYHOLYBELL 6 ай бұрын
Y yo bebiendo una coca cola viendo el vídeo.
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
🤪🤣🐢
@sssnakeeater124
@sssnakeeater124 6 ай бұрын
8:29 love watching you make handles with wood. Just as good as the metalwork. Keep up the good content 👍 😁
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
🤣🤣🤪🐢 Thank you!
@Tobidecai
@Tobidecai 6 ай бұрын
You only have one member?
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Only one member in the top tier. I also have more very nice members. 🐢
@darrenporsch
@darrenporsch 6 ай бұрын
Nice restoration but he really need a blast cabinet You could sandblast a bead blast off that rust so much faster
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you! I have a blast cabinet, but wanted to test whether cola is really suitable for rust removal... 🐢
@darrenporsch
@darrenporsch 6 ай бұрын
Seen another guy test a bunch of rush from universe his channels called project form cola did shitty vinegar did okay if Apple rust and cried cutter did the best
@user-tl9cr5go1z
@user-tl9cr5go1z 6 ай бұрын
Отличная работа. Чтобы масло не воспламенялось нужно опускать на глубину более 20 сантиметров.
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Хорошо, спасибо за подсказку. 🐢
@itsjustme.2331
@itsjustme.2331 6 ай бұрын
Good job of it, better than I though it would come out, one quick qestion, does your turtle have a name? I sure do see him alot.
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you! Yes, turtles name is "turtle" 😅🐢
@BillWright-qv1kc
@BillWright-qv1kc 6 ай бұрын
​@@ForgottenShineRestorationfucked up buddy
@Mastice81
@Mastice81 6 ай бұрын
Nice job! 👍🏻 Too bad for the crack on the handle at the end... 🥲
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Thank you very much! You have a very good eye for detail! 💪🐢
@linasalazar4906
@linasalazar4906 6 ай бұрын
Didn't... you do an ax video with cola before? Or am I thinking of a different video?
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
nope... 🐢
@modellbahnagenda
@modellbahnagenda 6 ай бұрын
Kompliment 👍👍👍
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Vielen Dank! 🐢
@jackk1583
@jackk1583 Ай бұрын
Exc work, but wondered why the wasted dripping oil....
@tankistyi1
@tankistyi1 6 ай бұрын
Отличная работа. Если не секрет - паста синего цвета , для полировки - что за паста? Какая гридность у неё?
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Большое спасибо! Конечно это не секрет, вот ссылка: amzn.to/3R7i388 🐢
@matthewday7565
@matthewday7565 6 ай бұрын
So that notch is meant to be there.... what does it do?
@lenobrien8183
@lenobrien8183 3 ай бұрын
Opens beer bottles
@MarlinWilliams-ts5ul
@MarlinWilliams-ts5ul 4 күн бұрын
Who was original manufacturer?
@saminda803
@saminda803 6 ай бұрын
❤🎉
@bidara8439
@bidara8439 5 ай бұрын
Use coke to wash Rusty axe ?
@user-qn3ty8gf7z
@user-qn3ty8gf7z Ай бұрын
Глубокие каверны от ржавчины удаляются следующим образом: 1) Производим нагрев и отпуск металла. 2) Завариваем каверны электродной сваркой 3) Снова закаляем металл. И всё)) разницу между сваркой и основным металлом невозможно разглядеть. P.S. Мистер Черепаха нормальный парень 😁
@iridios6127
@iridios6127 7 сағат бұрын
Просто завари каверны и закали. А кто увидит разницу между металлом - скажи что это дамаск.
@ryanwright5160
@ryanwright5160 Ай бұрын
Was that Tippy and Teri the turtle???
@saminda803
@saminda803 6 ай бұрын
❤🎉😮
@szppol2991
@szppol2991 3 ай бұрын
7:13 sus
@tonywalker8030
@tonywalker8030 6 ай бұрын
What if you mix vinegar with cola ?
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
🤔🤷‍♀️ I dont know... 🐢
@netashio
@netashio 6 ай бұрын
🤗
@micmacnz
@micmacnz 6 ай бұрын
Well, its better than drinking it I suppose...
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
😅🐢
@xRGTMx
@xRGTMx 6 ай бұрын
7:13 me when your mom
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Why did I laugh so hard when I clicked on the timestamps..... 🤣🤣🤣🐢
@metaldetectorcleaningobject
@metaldetectorcleaningobject 6 ай бұрын
🤩🤩👍👏👏👏
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
😎🤩🐢
@user-ij1wt2jl8v
@user-ij1wt2jl8v 6 ай бұрын
что за модель гриндера?
@ForgottenShineRestoration
@ForgottenShineRestoration 6 ай бұрын
Я купил ленточную шлифовальную машину на сайте vevor 🐢
@Tiko13A
@Tiko13A 6 ай бұрын
✌🏼🇦🇲✌🏼
@bishnugurung5474
@bishnugurung5474 3 ай бұрын
This type of handle is not so practical...it is more practical when handle of axe is round in shape and handle hole of axe also should be round in shape ...round shaped axe handle is also very easy to make ...there is no need of lock wood and glue to stick lock wood in round shaped handle...in round shaped handle we can also take out axe very easily whenever we need but we can't take out axe in flat shaped handle once it is locked...it is far more strong round shaped handle than flat shaped handle...I think western people don't know about round shaped handle...round shape handles are used from ancient times in Nepal and whole Asia which is more practical and scientific...
@rogerpatrongonzalez5800
@rogerpatrongonzalez5800 5 ай бұрын
👍👏👍👏👍👏👍👏👍👏👍👏🥃🥃🥃
@Onur19O7
@Onur19O7 6 ай бұрын
🙂👍🇹🇷
Hammer Restoration [With Resin Eye]
18:37
Forgotten Shine Restoration
Рет қаралды 378 М.
Old axe restoration. Restoration and customization
15:41
WD Restoration
Рет қаралды 11 МЛН
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 118 #shorts
00:30
Kitten has a slime in her diaper?! 🙀 #cat #kitten #cute
00:28
didn't want to let me in #tiktok
00:20
Анастасия Тарасова
Рет қаралды 12 МЛН
Cleaver Restoration [Golden Cleaver With Golden Handle]
16:49
Forgotten Shine Restoration
Рет қаралды 2 МЛН
Knife Restoration [Very Rusty Old Bayonet]
17:55
Forgotten Shine Restoration
Рет қаралды 4,2 МЛН
Flea Market Axe Find!!
4:21
Holler Company
Рет қаралды 2,6 М.
Antique Hatchet Restoration. SORT OF...
14:15
Black Beard Projects
Рет қаралды 50 МЛН
Huntsman's Axe  |  Restoration
13:40
carlrogers
Рет қаралды 898 М.
Rare Double Cleaver [Black Blade With Kingwood Handle]
16:13
Forgotten Shine Restoration
Рет қаралды 2,6 МЛН
Rusted Axe Restoration..beyond restored.
15:25
The Good of the Land
Рет қаралды 2,6 МЛН
Super Rusty Survival Knife Restoration...Rambo's Lost Knife?
15:44
Lost & Restored
Рет қаралды 6 МЛН
Knife Restoration [Purpleheart Handle With Violet Epoxyd Liner]
22:45
Forgotten Shine Restoration
Рет қаралды 1,2 МЛН
Пленка или защитное стекло: что лучше?
0:52
Слава 100пудово!
Рет қаралды 1,9 МЛН
Я Создал Новый Айфон!
0:59
FLV
Рет қаралды 3,5 МЛН
С Какой Высоты Разобьётся NOKIA3310 ?!😳
0:43