Axial SCX10-2 Trail Honcho $50 Budget Build - Week 2

Axial SCX10-2 Trail Honcho $50 Budget Build - Week 2 - Tires & Tips

Рет қаралды 59,404

6 жыл бұрын

The SCX10-2 Trail Honcho Budget Build Week 2! We spend $50 a week and try to build the best rig we can. This week new tires are installed and we continue to free up the suspension and drivetrain for free.
Proline KO2 1.9 Tire: amzn.to/2meA7gZ
Tire Baking Instructions
325 Degrees for 20 minutes on side 1
Remove bead on side facing UP
Flip Tire over and place back in oven for 5 mins
Remove from oven and remove wheel from tire.
Week 2 Budget Report
Proline KO2 1.9 x 2 - $53.98
Weekly Total - $53.98
Weekly Budget - $69.02
Balance - $15.04
Scale Builders Guild - Week 2 Video: • SCX10-2 Honcho $50 Bud...
My Camera/Production Gear:
Canon SL2: amzn.to/2iYEWNM
Canon 10-18mm lens: amzn.to/2jixGJE
Rode Video Micro: amzn.to/2kpl9rn
Joby Gorilla Pod: amzn.to/2BOvukY
Zhiyun Crane V2: amzn.to/2Eo3Zjc
MacBook Pro 15in 512gb: amzn.to/2DGgBRQ
Samsung T5 500gb Hard Drive: amzn.to/2CxRcN4
DJI Mavic Drone: amzn.to/2EGw2un

Пікірлер: 58

@HarleyDesignsInc 6 жыл бұрын

What $50 upgrade do you want to see in the series?

@josephspiteri2792 6 жыл бұрын

Harley Designs budget motor and esc

@barharborbasher249 6 жыл бұрын

The #benchflex got me thinking...Possibly proline shocks if that’s on the list.. then you can dial in the geometry for the links & steering or some cool scale accessories

@coolasrc 6 жыл бұрын

Hi Harley. I used your deadbolt budget build yesterday and I made my own copy of a howler custom battery and electronic tray. My scx10 was bone stock and now it handles so amazingly. Thanks Harley

@oscarsrc8125 6 жыл бұрын

Bumpers as i just got my first axial 2017 jeep rangler

@connorw.h7549 6 жыл бұрын

Shocks

@kcbunn9239 6 жыл бұрын

Great video. So many people look over the basic things with out of the box trucks. Good job on reminding the new guys to check and grease those ring gears. Let’s see some budget brass or weight down low, to help those KO2’s perform!

@WoodedCivilian 6 жыл бұрын

I'm enjoying the build off between you two keep up the good work 👍

@mudguyRC 6 жыл бұрын

Good stuff Josh- the friendly competition between yourself and the SBG is good. It provides something new to RC KZfaq. You know I’m team Harley all the way so kick ass!

@RcNickster709 6 жыл бұрын

I must say, I am enjoying the build off as well. Glad I am along for the ride.. Great work.. :)

@chevyon37s 6 жыл бұрын

I really like the RC4WD gladiator tires. They look great, perfect height, and have the best grip of any 1.9 tire I've ever seen. Again not the best for muddy trails but they stick on the rocks! I'm really liking the more shallow lugged and close voids on tires for pure rock crawling.

@scalebuildersguild 6 жыл бұрын

Great tire choice Josh! Looks like the weather is pretty nice for you as well... ;)

@ricksscalerc2222 6 жыл бұрын

Awesome video! Im thinking front bumper,id like to see what you choose.love the fancy paper tool for checking clearance..ill have to remember that trick..looking forward to seeing more.

@SPEEDOFDOG 6 жыл бұрын

excellent mods. thank you. will try.

@bradcowart5044 6 жыл бұрын

Nicely done , very informative.

@AMAZINGRC 6 жыл бұрын

Killer build, Bro...!!! Super Clean...!!!

@TangoOne 6 жыл бұрын

I was fairly pleased with the stock tires on the Honcho, of course our terrain may differ. Another interesting thing to note is that the manual actually lists these as the R35 compound whereas Axial's website specifies the S30 compound.

@mikeymike3240 6 жыл бұрын

Hi there, boy, you definitely have the technical skills, there's probably nothing you don't know about these rigs man. Great couple of videos. I'm not a fan of the type of body, cab and cage, that the honcho comes with, but after watching you guys work on them, I may get myself one. I've saved a few quid, but I'm unsure what to get. There's about 5 different rc's I'd love, but can't choose one from them. 😀 👍 👍 👍 👍

@HarleyDesignsInc 6 жыл бұрын

Bodies are easy to change when you’re ready of course. I like to keep the same body so that it looks relatable to others who own them!

@mikeymike3240 6 жыл бұрын

Harley Designs hi again, i never thought of it that way. But I'm still not fussy on it. 😀 👍

@scottbray5936 6 жыл бұрын

Loving this series

@pwrofgrayskull 6 жыл бұрын

Mayhem RC Same here, I'm loving it!

@pacbeltrr38 6 жыл бұрын

Thanks for the tip on the Tires! Going a little smaller is also going to lower your final Gear Ratio, slightly. But then, any reduction equates to better Climbing Performance! I'm enjoying your "friendly competition". I'm catching both of you every Wednesday! At 53.... it's safe to say that I don't win Anything. 😖 However, in the Spirit of the better times ahead, I'll give it a shot! Carmine 🚂

@HarleyDesignsInc 6 жыл бұрын

The friendly competition is the most fun I’ve ever had on KZfaq! I’ve known Matt for years but we’ve never collaborated on anything, makes me regret never taking an opportunity like this earlier!

@pacbeltrr38 6 жыл бұрын

You and Matt seem to really be enjoying this!! I sure am. He might edge you on the Scale Details - but you should get him back in the Performance Department!! I'm STILL hoping that Axial releases this as a KIT! I love it, but it's still beyond what this old, Broken Vet on Disability can come up with.... I do look forward to it! I had forgotten to Sub.... Fixed that!!! 😎😉 Carmine 🚂

@HighhScore 6 жыл бұрын

Decent amount of progress this week I’d say.

@bigmac5219 6 жыл бұрын

Ok I will some new foams and tires. Do you have a foam recommendation?

@carloseblanco 6 жыл бұрын

Hi. I would like to know if I can use 30k Silicone Diff Fluid to lubricate the transmission gears.

@dsbrothers2898 2 жыл бұрын

Just ordered one of these bad boys. What type grease u recommend? I am a newbie.

@jerrylester2527 4 жыл бұрын

Have u had a trouble with the steering servo?

@ShenRC 6 жыл бұрын

Nice mods.

@12R1rcbashr 4 жыл бұрын

Awesome video man really enjoy is there any metal links for this rig any info would be appreciated happy bashing bro.

@HarleyDesignsInc 4 жыл бұрын

Links are covered in this series. It should answer any questions.

@bigmac5219 6 жыл бұрын

Harley wonderful channel can I ask you a question how can I stop wheel wobble? I have a Axial Honcho.

@HarleyDesignsInc 6 жыл бұрын

Well are you sure it’s wheel wobble and not just tire wobble? Good foams will support a tire better and keep it more true. But tires on these types of trucks will always wobble. Now if it’s actually the wheels, you may want to look and see where it’s coming from. Worn bearings and plastic knuckles (or poor quality aftermarket knuckles even) can cause lots of wobble.

@jobysanson6761 6 жыл бұрын

#benchflex best video yet ha ha

@RTmadnesstoo 5 жыл бұрын

Do you worry about mixing greases? Sometimes China uses animal-based grease that doesn't mix with petroleum grease. I would disassemble and remove all of the factory grease if it needs attention.

@barharborbasher249 6 жыл бұрын

Man... I was just trying to go to bed lol

@adamnoga-styron7882 4 жыл бұрын

I am thinking of getting the 1.9 hyrax are they a good tire?

@HarleyDesignsInc 4 жыл бұрын

Great tire choice.

@revd13 5 жыл бұрын

Truck Newb here. Taking off the spur gear cover like that will that cause any problems with debris or water?

@HarleyDesignsInc 5 жыл бұрын

No, it’s really not a big deal. I don’t run a spur gear cover on most of my rigs actually.

@revd13 5 жыл бұрын

@@HarleyDesignsInc thanks for the quick answer. It really helps. I teach kids how to fly drones but now trail running and crawling has really got my attention. Trying to get all the basics in my head along with the gotchas before taking the jump.

@InvisiMan2006 5 жыл бұрын

Without the spur gear cover, isn't there a worry about getting sand or debris in those gears?

@HarleyDesignsInc 5 жыл бұрын

Open spur gears are not an issue, you’ll find them on tons of RC vehicles. It’s of no concern.

@craigbarnes7290 4 жыл бұрын

That answers the question I was going to ask, thanks guys 💪🏼

@Warwick3511 6 жыл бұрын

Will you be making a video on the future of hobbyco bankruptcy? since it effects alot of brands.

@HarleyDesignsInc 6 жыл бұрын

I’ll touch on it in the Monday news video.

@dirtyfingersninja 3 жыл бұрын

Lol. After watching this I tried and ripped a tire lol

@warrenholmes9171 6 жыл бұрын

I Probably should have ask the wife before baking in her new oven.........JS

@eddyfpv652 6 жыл бұрын

I'm 2nd

@jordanhemmings181 6 жыл бұрын

Wrong, tire choice man, should have gone KLR’s 🤪

@HarleyDesignsInc 6 жыл бұрын

I dig the look of the KLR’s but the price and not coming with foams just doesn’t work in this case. Plus, a licensed tire is a plus for many new people to feel relatable to the full size world.