Axial SCX24 Mod19 Microshark Build!
Рет қаралды 70,689
4 жыл бұрынI build a custom Axial SCX24 using Mod19's Microshark conversion kit. This is a fun and rewarding upgrade to the very cool SCX24 platform. Printed at Shapeways, this tube chassis buggy makes the SCX24 not only look better, but much more performance oriented!
Check out the complete step by step build on the forum here: scalebuildersguild.com/forum/...
Buy all the Mod19 Microshark printed parts required here: www.shapeways.com/shops/mod19...
Parts list:
1) Complete SCX24 (duh!) **Deadbolt version only until I can confirm more about the new JL Wrangler**
2) Mod19RC Shapeways Parts
- Micro Shark Frame for SCX24
- Chassis Parts for Microshark Conversion (not optional!)
- Hood and Grille for Micro Shark (Type S or Type T)
- Roof + Rear Panel for Micro Shark
- Left Body Panel (Type S or Type T)
- Right Body Panel (Type S or Type T)
- Fuel Cell + Cooler Rear Cover for Micro Shark(optional)
- Seats for Micro Shark(optional)
- Dash for Micro Shark(optional)
- EMax ES08MAii Servo Mount for Micro Shark
- SCX24 Improved Steering Links (recommended)
3) M1.2x3 Flat Head Screws. Here is the best source that I have found.www.metricscrews.us/index.ph.... head shape and diameter are important, as that is what things were designed to. These require a 00 Phillips screwdriver to install. You need (32) of them, but order extra...they are small and elusive.
4) Servo www.amainhobbies.com/emax-es.... The mount and chassis are designed to fit this servo.
5) Connectors/Leads to make battery wire extension.www.amazon.com/dp/B07NWD5NTN....
6) 1mm Diameter Drill Bit. for cleaning out holes of 3D printed parts.
7) You may want to consider a set of Mil Stone Wideners if you plan on using the stock wheels and tires. They can be found on ebay and there is a set specific to the SCX24. www.ebay.com/itm/Axial-SCX24....
Our merch is super cool: teespring.com/stores/scale-bu...
#axialscx24
#scalebuildersguild
Buy my gear here:
Sony a6500 amzn.to/2u9Rsfs
16mm Sigma amzn.to/2UFv5dD
55-210mm Sony amzn.to/2TH8DUR
Rhode Video Mic: amzn.to/2W56DlX
Zhiyun Crane amzn.to/2TIaxo9
GoPro Hero 6 Black amzn.to/2Y3rGHx
This Dewalt screwdriver is my goto nowadays.
amzn.to/2udpvn4
Fall 2019 Stickers are sold (already) out but we're still offering patches! Check them out here: scalebuildersguild.com/forum/...
► Follow us on Instagram! / scalebuildersguild
► Follow us on Facebook! / scalebuildersguild
► Join our forum!
www.scalebuildersguild.com/forum
► Merch available here:
teespring.com/stores/scale-bu...
I shoot all my videos on the Sony a6500 in 4K, with Sigma 16mm, 19mm & 30mm and 55-210mm f1.4 lenses and the Zhiyun Crane V2.
@RexRacer19 4 жыл бұрын
Great video of the assembly, Matt. It helps to visualize the assembly steps so much better!
@papachill 4 жыл бұрын
this thing is soo freaking rad!!! love the detail and the body panel screws!!! nice paint job for the interior, very relax video, thank you!
@michaelburton831 4 жыл бұрын
You are quite an artist my friend...love this build. Thank you Matt.
@RC-ScalerandBuilder 4 жыл бұрын
And that’s why this is THE Scale Builder’s Guild! Thank you, awesome video.
@meadowlarkgal23 4 жыл бұрын
What a fantastic project. The painting details are awesome. You are a creative scale builder, my friend!
@Chris_Bumpus 4 жыл бұрын
Looks great! Super cool set up! Props to the designer!
@jim9310 4 жыл бұрын
I gotta say I enjoy watching everyone of your videos, no matter how small they are. Great work!
@AgentChachi 4 жыл бұрын
Dude, it’s like you read my mind! Or my posts asking you to hit this little rig up! You da man!! Thanks SBG!!
@Stickies72 4 жыл бұрын
That is a really cool build video, I had no idea you could go that far with an SCX24. This mod kit for it makes it super cool, and it is pretty cool seeing some of your techniques, thank you for sharing, great video. 👍👍👍👍👍
@coloradoprospecting1034 Жыл бұрын
Freaking sick digging that detail you put into the interior and all in all good looking Rock buggy
@scalebuildersguild Жыл бұрын
Thanks!
@robertrosson1990 4 жыл бұрын
Great build.Makes me want to get my wraith off the shelf and get it back together with all the SSD parts stocked up on to to make a nicer performance rig.Thanks for sparking my interest again.
@michaeldeering798 4 жыл бұрын
I feel super spoiled, it seems your putting out videos way more often and I gotta say I appreciate it!
@anibalbabilonia1867 3 жыл бұрын
Wow! That came out looking cool! Looks like a miniature axial wraith!👌😎👍
@gerrysoldguyreview 4 жыл бұрын
Good god I knew they were small but seeing your hands working!! Looks great sir!
@BMXheath 4 жыл бұрын
That is so cool. Great work on the build
@ssamssamssamsson 4 жыл бұрын
Running video is a must !
@scalebuildersguild 4 жыл бұрын
Definitely!
@coolasrc 4 жыл бұрын
That’s too cool!!!! Great work from New Zealand
@alexhardwick2855 4 жыл бұрын
Wow it looks awesome. Thanks for the vid really enjoyed it.
@JotaP4wd 4 жыл бұрын
I Love it! Congratz 4 the build ! ❤🚗💨
@CarminesRCTipsandTricks 4 жыл бұрын
Matt, this is one of the most incredible Micros I've ever seen!! 👍👍😎 I wish I could get a SCX24. This is the sort of thing I'd love to do to it. Carmine ✈🚂🚙
@chrisquigley2580 4 жыл бұрын
cool, got that scx24 wraith option now that i commented about in your first video when it came out. nice video, i might have to actually look into it if my ither ideas dont pan out.
@johnsdad092009 4 жыл бұрын
Man that so cool Matt. Love it.
@gregdabratshorts Жыл бұрын
I am SO gonna do this, this looks freaking awesome!
@scalebuildersguild Жыл бұрын
Go for it!
@gregdabratshorts Жыл бұрын
@@scalebuildersguild Did the injora buggy instead since it still looks super awesome but it's 1/5 the price!!
@danielemulazzi7309 4 жыл бұрын
Woww! !! ...troppo bello questo modello !!!...bravo bel lavoro !!!..complimenti! !!
@LyroLife 4 жыл бұрын
That looks amazing. Well done, much better than the original.
@WestDesertShooter 4 жыл бұрын
I never cared to have an SCX24 until now. So sick!
@tjenkins1126 4 жыл бұрын
Great build my friend! 👍🍻
@markdickerson6864 4 жыл бұрын
Great video shows great skill on something so small. The chilly bin made me stop for a second though that’s a new term for me.
@scalebuildersguild 4 жыл бұрын
It’s all the rage in New Zealand!
@jasonmarkley6164 4 жыл бұрын
that really is great Matt!
@norsefalconer 4 жыл бұрын
As of 122019, it's about $146.50 for the printed parts, $9 servo, $30 wheel spacers and $110 for a 1/24 Deadbolt. Plus, shipping charges and ancillary items like screws, wiring, paint, etc. $300+ for a completed rig.
@gagebenson7898 Жыл бұрын
Wow I didn’t even realize this was you, you always do great work it’s just anytime I watch your videos you always have a good energy and this was just quiet still very entertaining I watched the whole thing and went to the comments and seen you pinned someone’s comment and then I was like whatttt this is his video lol
@trdrmadman3725 4 жыл бұрын
I have to say I love the vide I have learned so much for you videos
@jeff2633 4 жыл бұрын
As soon as I got my SCX24 I wanted it to look like that. But sadly my skills weren't up to the task. Nice to see somebody with the skills had the same idea.
@fernsolo 4 жыл бұрын
Beautiful, expensive but beautiful.
@aussiegrimrc 4 жыл бұрын
Awesome little rig cheers
@bryanlarsen2330 4 жыл бұрын
I want to get a couple of these for the backyard. Find a couple cool model bodies and do a bit of customizing.
@tjohanne 4 жыл бұрын
Amazing! I love it.
@trashPanda416 4 жыл бұрын
Awesome little build, lego blockCrawler!
@pwrofgrayskull 4 жыл бұрын
Wow, what an informative video. Your work is highly impressive. Well done. Finished product came out fantastic. I'd also love to see a running video, if you get a chance. 👍✌️
@nj4x4fever2 4 жыл бұрын
Nicely done.
@sir2honda 4 жыл бұрын
Well this was relaxing and then I got spooped at the outro
@rccasper1 4 жыл бұрын
I want one like this, looks fun.
@angelpiste805hotwheels2 2 жыл бұрын
Just got one ordered for my birthday.
@scalebuildersguild 2 жыл бұрын
Happy Belated Birthday! Thanks for watching!
@angelpiste805hotwheels2 2 жыл бұрын
@@scalebuildersguild no thank you. I just got it in today! Definitely gonna be watching this video when I’m putting it together!
@hellofromsoutheastalaskarc7517 2 жыл бұрын
Hello from southeast alaska. This is a cool build
@BlindGuyRc 3 жыл бұрын
Dude. This is awesome. ⭐⭐⭐⭐⭐😎👍👍
@GoochiFPV 4 жыл бұрын
OMG its epic! SO much better than stock, although I love that hardbody! You so need a DooRok from Tiny4x in your collection thou! 1/36th complete epicness!
@RcNickster709 4 жыл бұрын
Wow!! What a transformation!! Great work man.. Still wondering if I like the look of the cage without the panels?? Thanks for sharing
@byknmikerc7153 4 жыл бұрын
well shoot now I have to add an scx24 to my micro collection! this would make a great micro u4 truck! sold me!
@MrSneakyGunz 2 жыл бұрын
Super nice!
@chujmlrc 3 жыл бұрын
Waaa very good Job !! 👌🏻👍🏻🍻
@trialpsycho_rc 4 жыл бұрын
Does look so much bigger as 1/24 👏🤙
@chrisdavis3952 4 жыл бұрын
Cool video
@joshthompson6911 4 жыл бұрын
Axial wraith 1/24 keep up the good work man
@wildmangeorgesrcchannel6916 4 жыл бұрын
This is pretty cool. I’m gonna do this to mine when the time comes. I have a shelf with 3 or 4 crawlers I’m gonna overhaul and make different. But I want a bigger motor for the scx24 I’m tired of these ones that burn out every 10 or 20 hours of run time
@tomandrews5392 4 жыл бұрын
So cool what a difference...
@larshansen3186 4 жыл бұрын
Making me want a scx24
@Chris_Bumpus 4 жыл бұрын
Ive watched this vid probably 5 times. Good vid! I just ordered my micro shark parts and cant wait to build it. This vid is good but missing your usual amusing commentary!
@rccrawlerextreme 2 жыл бұрын
Thks for sharing bro
@AngryDavesADULTRC 4 жыл бұрын
Pretty wicked. You basically just built a 1/24 Wraith! Let's see a run vid and compare to stock. -"Angry" Dave
@mrspiderplays7746 2 жыл бұрын
Your so lucky dude I’ve wished for something like that since I’ve been in the hobby. Looks so cool tho
@rcsbyrich3035 Жыл бұрын
I know its an older video now. Just doing a little ripper chasis after watching this what colour is the body it says ts5 but there isn't one . Was it discontinued maybe. What would be a very close colour to this pls 🙏 great job 👏
@TheRCNetwork 4 жыл бұрын
All I saw were #manhands - great video! I know how much work goes into that type of video.
@seanhanley947 4 жыл бұрын
Those were the smallest zipties you could find? I like it! Makes me want to get one where as before i could take them or leave them.
@_DeFiNiTeLy_Not_BrAd_ Жыл бұрын
Do you think they will make a chassis like this for the FMS FXc24? I would like to make a real cage for these 1/24 trucks, i think that would be hilariously awesome. I think this would scratch that itch for now, such a cool build.
@greggmundkowsky5798 4 жыл бұрын
Nice job Matt, not my thing but that is what makes this hobby great. I think that cage and interior would look. Great in a Jeepspeed CJ. Only question is where is your driver so you can get some running videos. What was the pickup body from?
@scalebuildersguild 4 жыл бұрын
Tacoma was an AMT model kit! Driver will be in there eventually!
@braddahdussifyoumuss596 4 жыл бұрын
Soooo sick
@dylanolson8023 4 жыл бұрын
Mesmerizing
@braedenne10 2 жыл бұрын
Just wondering because I want to build one of these and allready have a deadbolt and some new parts for it and would like to cut cost where I can. 1. I have an emax servo already and an aluminum servo mount for it, would any emax servo mount work? 2. I have carbon fiber chassis rails, I’m gonna guess those won’t work with this kit?
@bradyjensen2079 3 жыл бұрын
Just a quick question, where did you get the extended front top 3 link? I am wanting to extend my c10 and only need the extended triple link
@hollyhillrc 4 жыл бұрын
😍😍😍 I love it 😍😍😍
@rickschoephoerster1149 4 жыл бұрын
A little late for this build, hard to find the difference between the type T and type S? What did you build, looks good. They ,Shapeways, has a chassis kit for the C10 to use on the micro shark. Thanks for any feedback.
@00godlovesus 4 жыл бұрын
That was fun;)
@dirtydsrc 4 жыл бұрын
That is sweet.
@brianonthego 3 жыл бұрын
Very cool build. What would you say the cost is for complete build?
@jarekmace1536 3 жыл бұрын
Great kit, looks awesome! The only problem I have with it is that the kit is nearly twice the cost of the base truck. Unless Shapeways comes down from their prices, I don't see a lot of these being sold, unless someone just has money to burn.
@scalebuildersguild 3 жыл бұрын
You might be surprised at how many have been sold.
@RS-sv3bl 2 жыл бұрын
I really really really want this form factor SCX24. Now you've made it hard for me to justify not doing it! Need to find out where I can get it printed here in AUS
@scalebuildersguild 2 жыл бұрын
Good luck! I wish I knew some AUS resources to help you out!
@RS-sv3bl Жыл бұрын
@@scalebuildersguild Ordered from Shapeways and it turned up all fine. I have gone to the 9's upgrading it - Injora high clearance links, Komodo micro brushless and the matching micro ESC, metal shocks etc etc. It's a little beast and pretty much unstoppable :) Thanks for the inspiration, and especially guidance with this vdeo - it really helped me a lot with the build
@madmaxximus1234 4 жыл бұрын
Dam! The smallest bad ass I've seen. You should call it Badger!! Right on!!
@quittnerfpv211 4 жыл бұрын
what body was the truck one in the beginning of the video?
@ridewithfriendsbmx3983 4 жыл бұрын
awesome build, how much did you spend on all the shapeways stuff?
@scalebuildersguild 4 жыл бұрын
Around about $160.
@derrickwilliams2903 4 жыл бұрын
In case you're wondering, it's $185.11 for the 3D printed parts, $18.88 for the screws, $8.99 for the servo, and $32.99 for the mil stone wideners. I couldn't find the exact JST extension kit, but it's probably inexpensive. So, a total of about $245 for the mods, not including tax and shipping. Total vehicle cost would be about $355. I love the results, but think of what you can buy for $350.
@TRXHellcatDaddy 4 жыл бұрын
Besides the side panel screws (I ordered them already), are the existing screws all that’s needed to complete the build? Epic build btw. You fueled my desire to build one. Thanks!
@RexRacer19 4 жыл бұрын
There are enough screws in the stock SCX24 to do the build.
@TRXHellcatDaddy 4 жыл бұрын
RexRacer19 Appreciate the feedback!
@NCMOUNTAINSbackyardRC 4 жыл бұрын
Wicked .. looking sweet!!!! NC❤ MOUNTAINS Backyard RC and MORE 🏞🖒💯👌
@trinitymirror 4 жыл бұрын
Can you answer a unrelated question for a newb please? I want to buy and run a "yeti Style" model for fun speed use rather than crawling or trail. The Yeti is discontinued in the UK at least. Could you recommend a Yeti/wraith model style I can bug a fast BL setup in? thanks
@scalebuildersguild 4 жыл бұрын
Bomber would be a decent choice. Set up properly, it can be just as fast. You lose IFS, so if you’re desperate for that, pickings are slim. Perhaps a Traxxas UDR without the body?
@soundmindtv2911 2 жыл бұрын
Found it 😎
@josephpacheco7508 Жыл бұрын
Such a cool build but whats with it not being offered as a build kit in raw for like LGRP? Thats a let down in a sense. Still considering which kit to go with....
@justingatien330 3 жыл бұрын
The link you put for the hardware doesn't work. Would you have another one? Can't find hardware here in Quebec so far.
@scalebuildersguild 3 жыл бұрын
Click through to the first link to the forum, all the links work from there.
@jesbestpro 4 жыл бұрын
Hi great video. one question, what is the name off the song, really loved it
@scalebuildersguild 4 жыл бұрын
All my music comes from Epidemic music!
@revrozell06 4 жыл бұрын
i want to build one so bad could you also use the stock servo !??
@scalebuildersguild 4 жыл бұрын
You could, but the clearance is a little tighter, and this new one will last longer.
@sussubies4966 3 жыл бұрын
Does this kit work for the new jeep model?
@GymShorts333 4 жыл бұрын
Would you recommend this conversion for a beginner? Ps great video
@scalebuildersguild 4 жыл бұрын
Good question! It's not too difficult to assemble, so take your time and have the right tools!
@GymShorts333 4 жыл бұрын
Scale Builder's Guild thanks man
@Jaymach024 3 жыл бұрын
What hex tool do you use? Can't seem to find a good one.
@scalebuildersguild 3 жыл бұрын
I think I used my Tamiya cross wrench.
@daz1975ify 4 жыл бұрын
Citadel paint is great if you water them down a bit u get no brush marks either🖒
@scalebuildersguild 4 жыл бұрын
Works great without watering down too!
@luisfeliu2585 4 жыл бұрын
Cuál es la pintura de los detalles?
@BDcumminsdiesel 4 жыл бұрын
Hey bud I haven’t seen a video from you in awhile is everything ok with you
@codysebulsky6584 2 жыл бұрын
do they still sell these kits or have they stopped since it was so long ago?
@scalebuildersguild 2 жыл бұрын
Still available through the links in the description.
@gbowron3 2 жыл бұрын
Could these parts be scaled up to match the SCX10?
@scalebuildersguild 2 жыл бұрын
No, completely different chassis. Sorry!
@PhoenixRCCrawler 4 жыл бұрын
👍🐒🇺🇸 super cool.
@Gniggaaa 3 жыл бұрын
That looks so good but i don’t wanna spend that much on a body 😅
@theaverageredneck8426 3 жыл бұрын
What was that truck hard body you had on there before
@scalebuildersguild 3 жыл бұрын
Revell Toyota.
@theaverageredneck8426 3 жыл бұрын
@@scalebuildersguild I appreciate it
@PhilBender612 4 жыл бұрын
I've ordered shapeways Suzuki Samurai /proline sumo parts and spent over $200 on them. I imagine this one cost about the same?
@scalebuildersguild 4 жыл бұрын
I believe total cost from Shapeways is $158
Cape Crawlers
Рет қаралды 40 М.
Chill TheSoul Out
Рет қаралды 24 МЛН
The Shop - Mini RC
Рет қаралды 2,1 М.
Bcochener
Рет қаралды 21 М.
RC Review
Рет қаралды 120 М.
Таисия Скоморохова
Рет қаралды 1,6 МЛН
PavePro Asphalt Solvent and Release Agent
Рет қаралды 16 МЛН
Лёня Пятница
Рет қаралды 6 МЛН