Technically, this puzzle is a 2.64 x 2.64.

Despite minor things that some people have commented about your presentation, I actually think the way you explain it is much clearer than others that I’ve seen, so thanks. Im still figuring it out, but I’m sure your video will be a great help!

Knowing the 3x3 may help, but this is significantly more challenging. I’ve done mirror cubes, barrels, twist cubes, 9x9, 6x6, none as challenging as this

Me: *wants to learn how to solve an axis cube* My Brain: wait, wut...

My wife got me one of these.... it has made me feel intellectually defunct ever since. I love my 3x3... LOOVE my Megaminx... love my many other puzzles... but I HATE this cube. So unintuitive... just moving this thing is a pain in the ass. I love her for thinking of me... but I despise this cube with every facet of my being.

I think this chanel is the best place to learn the method of solving rubik's cube!!🔥 Anyone?

Thanks bro I did it Others were a bit tough but this one has the same examples as 3*3*3 which made it more simple Many people told we have to learn mastermorphic for this but I learnt it without it

Omg this is so complicated you must be some kind of genius

Finally solved it...your tutorial is really helpful, unlike other atrocious ones

Thank you! At the last layer when orienting the final pieces, I would always do a single algorithm over and over from different angles until every piece was facing the right way. Your way is so much quicker!

After the first layer is done, one could also do the U2 R2 adjustment method for the corners.

When you finish solving the first layer, how do you rotate your centers on the second layer

how do you rotate a centre 45 degrees?

Thanks for the tutorial. It was very helpful! Only problem I have is when I solve it I still have a corner that needs to be turned 90 degrees. I can't find a solution for it. Any advice?

Thank you Learn_The_Cube ! I finally solved my axis cube with the help of your tutorial😊😊

I noticed ,that this cube is solved in the same way as master morphix. Fortunately i have that cube too. And finally i find out how to solve last layer!

THANK YOU I FINALLY SOLVED IT!!

R U R' U thank you so much - this middle bit orientation has been doing my head in.

I just dont get how this cube turns. Mine is pretty loose, no magnets or any mechanics that keeps the line of the cube. I end up just beeing stuck, not knowing How to move any of this thing.

You earned a sub!

Thank you so much. this video one of the easiest ways to think.

That final step was a little tricky to follow (even with all my standard 3x3 practice), but I finally solved the worst mod cube I have (unless you count the Impossible Cube hahaha). Thank you for the video!

Moving the parts around smoothly is still my issue. It is still always getting stuck

I finally solved it Remember me?

Cool tutorial.😊

dont mind me, im just adding a reminder: last layer 6:08

this is the only tutorial i could understand so thanks for making it

where did you get your axis cube? do you recommend it? awesome tutorial by the way!

Woah. This is by far the best Axis tutorial I've seen. Maybe a little fast but I recognized all the similarities with the classic 3x3 and now I should be able to solve it. Thank you! Subscribed right away

great tutorial! thanks

You know all the trash comments in the bottom don’t give a sh🐬t about what they say. You are the best.

my brain cant handle this shape mod lol

4:56 Last Layer.

Best tutorial on yt

ok i just nearly finished the axis cube with this tutorial. What do I do if I have a center rotated 180 degrees with a corner/pyramid rotated 120 degrees?

Good solution bro🌌👌

what happens if you need to turn *one* center 90'???

I know I’m saying stuff a lot in one row, but you really deserve a quadrillion subscribers x 999999999999999999999999999999999999999999999999999999999999999999999

thanks for the tutorial

wow.. i solved this cube now easy because i solve first the ghost cube.... is my way of picking puzzles inccorect?

hi actually, in the last layer i have 2 corner in right place but not oriented and 2 not in right place so pls tell what to do

Great tutorial!!

Hi.....I have a case in the axis cube......when I reach the third layer.....I could solve the edges but there is a unique case......when I solve the edges....two corners are oriented and two are incorrect......sometimes, all are incorrect and when I try to solve the corners...the same case of the two corners appear......PLSSSSS HELP MEEEEE!!!!!!

Thanks a lot for this tutorial!

I'm a big fan mr. learn_the_cube

I regret buying this ahead of time. 😂

i solved it thanks for the tutorial

Thanks for the clear explanation

This actually really helped for last 2 corners

Me getting ready for my cube coming at 4🎉

Oh, it's hard for me turn around the cubes. So complicated. Can I request for a step by step tutorial.

Bro in the third layer, you did the algorithms different than mine that are used to solve for the 3x3. Do i need to go back and learn your algorithms or mine just works the same? I’ve been trying to solve the corners but it kept going back to the beginning. Pls i need help Edited: i did it tks Jesus😭😭😭😭😚😚

i literally can’t figure out how to turn it 😭

I literally got the same case as yours in the 2nd last n last step. Pretty ez for me

Thanks bro!

One of my center pieces is rotated 90 degrees. This is the step right before the last layer. How the heck do i solve it. And i need an actual algorithm not like "t perm" or smth because i never learned the names and stuff

How do you flip a 2 colored edge?

very understanding

This man deserves 100 million subs

U are the best bro love u I was trying this past a year

How do you flip the centers during 2nd layer? All my centers are flipped

Hey can you help me? When I solve the whole thing there is still one misarranged center in the last layer. How do I fix this other than redoing the whole cube

improvement: Speak louder, get a good cube cuz of the spring sound, its ok thoudh

1 center piece is rotated 90°, can we rotate just that center piece 90° instead of 180°? Or is it just impossible?

Please help! No matter what i do i cant get the last layer edges aligned

this video is much more simple than others that i have seen yet i’m still very confused

when u were about to explain how to solve the axis cube, I somehow accidently got to the 6:45 part by turning random parts

5:00 last layer

How can I even do this? It gets in the way of itself and a side moves when I do not want it to... also, I am unable to remember which piece is where and what while working on the second layer.

I have bought an axis cube and now it seems like it is going to take forever to solve it

I'm getting a problem with the center pieces. Is the a algorithm of rotation of the center piece without any other piece moving

You really help me thank you but I still don't understand the second to last one

Problems I have (I’m pretty dumb) Turning lock ups Can’t get centres in right spot Can’t make cross When I make cross and I try to put in edges it gets destroyed Pls help I’m losing my sanity

My sister pov. Just twisting corners😂

How to fix a 90° tilted Centre?

The last part is hard lol

Thanks! I solved it!

7:02 match top corners

How do i do all the edges? I dont understand , could you do some examples please XD

Hi... Could you help me. With last layer. I cant make the cross. I do it no matter how many times it just doesnt make the cross

i dont know how to make the centers the correct position

I’m kinda confused about the long triangle pieces and how to insert them. Can you help?

So, is it a Ghost with colors?

ITS LIKE THE MASTERMPRPHIX

I don't know how to solve the third layer!!!😢 help me plss

So.. it’s just a mastermorphix into a cube

Thanks, this helped me solve it.

I could solve it but everytime i turn it wont cuz one layer is not correct blah blah

It was a legit fly in his camera

Last layer algorithm please tell ...

if it isnt to late.....when i get to the top layer i end up with three right and one wrong and im so confused and frustrated

how to flip the edges

I have one with out colors just shapes it’s harder wish I could get a color

even after the tutorial im still completely lost

Question. What is the name of the axis cube you showed in this video?

What is the l case

Which cube u buy

thank you so much you help me a lot

I got stuck at the last layer ;(

Thanks a lot! made it.